• 한국농림기상학회지
• /
• 제10권4호
• /
• pp.167-176
• /
• 2008

Airborne pollen is known as one of the major causal agents to respiratory allergic reactions. Daily number of pollen grains was monitored using Burkard volumetric spore traps at seven locations including Seoul and Jeju during 1997-2007. Pollen grains were observed throughout the year especially from February to November. They showed similar distribution patterns of species among locations except in Jeju, where Japanese cedar vegetation is uniquely found. Peak seasons for pollen grains from trees and weeds were March to May and August to October, respectively. Tree pollens were mainly composed of pine, oak, alder, and birch. Weed pollens were mainly from Japanese hop, Worm wood, and ragweed. Diameter of pollen grains, which has a typical range of $20{\sim}60{\mu}m$, has close relationship with allergenicity. Allergenicity of tree and weed pollens is higher than that of grass pollens in general. In the case of trees and shrubs, pine trees account for about 70% of all tree pollens. However, pine pollens are weak allergens. The remaining 30% of tree pollens, including alder trees, white birches, and oaks, are moderate to strong allergens despite the smaller numbers. Grass and weeds are also highly likely to cause allergies. Especially, the pollens of Wormwood and Japanese hop are highly likely to cause allergies. Daily fluctuations in the number of pollens have to do with a variety of meteorological factors, such as temperature and rainfall.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.177-186
• /
• 2021

Radioactive materials from nuclear power facilities can be released into the atmosphere through various channels. Recently, the dispersion of radioactive materials has become critical issue in Korea after Kori Unit 1 and Wolsong Unit 1 were permanently shut down. In this study, annual atmospheric dispersion factors were compared based on the continuous release and purge release using the XOQDOQ computer program, a method for calculating atmospheric dispersion factors at commercial nuclear power stations. The meteorological data analyzed in this study was based on the Shin Kori nuclear power meteorological tower which has the largest operating nuclear power plants in Korea, for three years (from 2008 to 2010). The analysis results of the dispersion factor of the radioactive material release obtained using the XOQDOQ program showed that the difference between the continuous release and purge release was within two times. This study will be valuable helpful for revealing the uncertainty of the predictive atmospheric dispersion factor to achieve regulation.

• 한국산림과학회지
• /
• 제99권2호
• /
• pp.163-171
• /
• 2010

Forest fires have potentials to change the structure and function of forest ecosystems and significantly influence on atmosphere and biogeochemical cycles. Forest fire also affects the quality of public benefits such as carbon sequestration, soil fertility, grazing value, biodiversity, or tourism. The prediction of fire occurrence and its spread is critical to the forest managers for allocating resources and developing the forest fire danger rating system. Most of fires were human-caused fires in Korea, but meteorological factors are also big contributors to fire behaviors and its spread. Thus, meteorological factors as well as social factors were considered in the fire danger rating systems. A total of 298 forest fires occurred during the fall season from 2002 to 2006 in South Korea were considered for developing a logistic model of forest fire occurrence. The results of statistical analysis show that only effective humidity and temperature significantly affected the logistic models (p<0.05). The results of ROC curve analysis showed that the probability of randomly selected fires ranges from 0.739 to 0.876, which represent a relatively high accuracy of the developed model. These findings would be necessary for the policy makers in South Korea for the prevention of forest fires.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1903-1905
• /
• 2002

The degree of contamination on outdoor insulator is one of the most important factors for the determination of insulation level. And the salt, NaCl, is known as the most dangerous contaminants in the most region of the world. As shown through the preceding study, we could find the close relationship between the generation and deposition of salt contaminants and the meteorological conditions. To analyze the relationship, we monthly measured the ESDD for some sites with brush wiping method, and daily measured the density for one site with the automatic measuring apparatus. And, with the measured data and the meteorological data from KMA(Korea Meteorological Administration), we analyzed the relationship between the two factors with regression method. Through the results of this investigation, we could quantify the comparative contribution of the climatic factors for the pollution level of outdoor insulator, and the results could be used as a useful reference for the maintenance of overhead lines and substations.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.1-6
• /
• 2015

Factors that have influence on solar power generation are specified into three aspects such as meteorological, geographical factors as well as equipment installation. Meteorological factors influence the most among the three. Insolation, sunshine hours, and cloud directly influence on solar power generation, whereas temperature and wind speed have impacts on equipment installation. This paper provides explanation over temperature-wind speed equation by calculating influence of temperature and wind speed on equipment installation. In order to conduct a research, pyranometer, anemometer, air thermometer, module thermometer are installed in 2MWp solar power plant located in South Cholla province, so that real-time meteorological data and generating amount can be analyzed through monitoring system. Besides, if existing and new methods are applied together, accuracy of prediction for generating amount is improved.

• 대한원격탐사학회지
• /
• 제19권1호
• /
• pp.21-30
• /
• 2003

It was studied the relationship between the red tide occurrence and the meteorological and oceanographic factors, the choice of potential area for red tide occurrence, and the satellite monitoring for red tide. From 1990 through 2001, the red tide continuously appeared and the number of red tide occurrence increased every year. Then, the red tide bloomed during the periods of July and August. An important meteorological factor governing the mechanisms of the increasing in number of red tide occurrence was heavy precipitation. Oceanographic factors of favorable marine environmental conditions for the red tide formation included warm water temperature, low salinity, high suspended solid, low phosphorus, low nitrogen. A common condition for the red tide occurrence was heavy precipitation 2∼4 days earlier, and the favorable conditions for the red tide formation were high air temperature, proper sunshine and light winds for the day in red tide occurrence. From satellite images, it was possible to monitor the spatial distributions and concentrations of red tide. It was founded the potential areas for red tide occurrence in August 2000 by CIS conception: Yeosu∼Dolsan coast, Gamak bay, Namhae coast, Marado coast, Goheung coast, Deukryang bay, respectively.

• 한국농림기상학회지
• /
• 제6권4호
• /
• pp.242-249
• /
• 2004

This study was conducted to develop a forest fire occurrence model using meteorological characteristics for the practical purpose of forecasting forest fire danger. Forest fire in South Korea is highly influenced by humidity, wind speed, and temperature. To effectively forecast forest fire occurrence, we need to develop a forest fire danger rating model using weather factors associated with forest fire. Forest fore occurrence patterns were investigated statistically to develop a forest fire danger rating index using time series weather data sets collected from 8 meteorological observation centers. The data sets were for 5 years from 1997 through 2001. Development of the forest fire occurrence probability model used a logistic regression function with forest fire occurrence data and meteorological variables. An eight-province probability model by was developed. The meteorological variables that emerged as affective to forest fire occurrence are effective humidity, wind speed, and temperature. A forest fire occurrence danger rating index of through 10 was developed as a function of daily weather index (DWI).

• 대기
• /
• 제30권4호
• /
• pp.347-360
• /
• 2020

The automatic algorithm optimized for the Korean Peninsula was developed to detect and track the center of typhoon based on a geometrical method using high-resolution retrieved WISSDOM (WInd Syntheses System using DOppler Measurements) wind and reflectivity data. This algorithm analyzes the center of typhoon by detecting the geometric circular structure of the typhoon's eye in radar reflectivity and vorticity 2D field data. For optimizing the algorithm, the main factors of the algorithm were selected and the optimal thresholds were determined through sensitivity experiments for each factor. The center of typhoon was detected for 5 typhoon cases that approached or landed on Korean Peninsula. The performance was verified by comparing and analyzing from the best track of Korea Meteorological Administration (KMA). The detection rate for vorticity use was 15% higher on average than that for reflectivity use. The detection rate for vorticity use was up to 90% for DIANMU case in 2010. The difference between the detected locations and best tracks of KMA was 0.2° on average when using reflectivity and vorticity. After the optimization, the detection rate was improved overall, especially the detection rate more increased when using reflectivity than using vorticity. And the difference of location was reduced to 0.18° on average, increasing the accuracy.

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.8-19
• /
• 1998

The dicriminant function was introduced to understand the cause and establish the prediction method of red tides occurring In Jinhae Bay. Korea. Two sea re91ons of Masan and Haengam Bays and Dang- dong and Wonmun Bays had different types of causes and patterns for red tides. In Masan and Haengam Bays, the red tides concentrically occurred during June and September. For example, in .lune the red tides occurred from physical and meteorological factors, which are related to the stratification and the increase in planktons. However in August the red tides occurred from the water quality environment, based on these conditoins. Futhermore, in September the red tides were caused by the balance between the meteorological and water quality environmental factors. In contrast to those, In Dangdong and Won-mun Bays, the red tides mainly occurred during July and October and the frequency of occurrence was not as much as Masan and Haengam Bays. Especially, in August and September most meteorological and physical factors or water quality environmental factors appeared to contribute to the occurrence of red tides. This indicates that red tides do not easily occur as they are controlled by various environmental factors particularly in these regions The discriminant functions were applied to predict red tides which they were actually occurred In Masan and Haengam Bays in June. The results showed that they were successful for the prediction of red tide at Haengam Bay but not at Masan Bay. The reason for their discrepancy in Masan Bay could have come from using a slight higher value of pH or COD in May, instead of its value in June.

• 한국의류산업학회지
• /
• 제19권4호
• /
• pp.434-447
• /
• 2017

This study investigated the effects of influencing factors on the sales volume of apparel products. Based on previous studies, weekend effect, discount rate, and meteorological factors including daily average temperature, rainfall, sea level pressure, and fine dust were selected as independent variables to calculate their effects on sales quantity of apparel products. The daily sales data during 2015 - 2016 were collected from casual brands and outdoor brands which "A" apparel manufacturing company had operated. The actual data of "A" company were analyzed using SAS(R) 9.4 and SAS(R) Enterprise Miner 14.1. The results of this study were as follows: First, the influencing factors on total sales volume of apparel products were proved to be the weekend effect, discount rate, and fine dust. Second, the analysis of influencing factors on sales volume of apparel products according to season showed: 1) In casual brands, the average temperature had a significant influence on the sales volume of spring/summer products, and the sea level pressure affected the sales volume of summer/fall/winter products significantly. 2) In outdoor brands, the average temperature and the fine dust had a significant influence on the sales volume of all season's products. The sea level pressure affected the sales volume of summer/fall/ winter products significantly. The weekend effect and the discount effect affected the sales volume of apparel products partly. Third, the effect of rainfall was not proven significant, which was different from the results of past studies.