• Journal of Powder Materials
• /
• v.30 no.4
• /
• pp.324-331
• /
• 2023

Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.

• Geomechanics and Engineering
• /
• v.32 no.3
• /
• pp.307-319
• /
• 2023

Ground fissures have a huge effect on the integrity of surface structures. In high-intensity ground fissure regions, however, land resource would be wasted and city building and economic development would be limited if the area avoiding principle was used. In view of this challenge, to reveal the seismic response and seismic failure characteristics of ground fissure sites, a shaking table test on model soil based on a 1:15 scale experiment was carried out. In the test, the spatial distribution characteristics of acceleration response and Arias intensity were obtained for a site exposed to earthquakes with different characteristics. Furthermore, the failure characteristics and damage evolution of the model soil were analyzed. The test results indicated that, with the increase in the earthquake acceleration magnitude, the crack width of the ground fissure enlarged from 0 to 5 mm. The soil of the hanging wall was characterized by earlier cracking and a higher abundance of secondary fissures at 45°. Under strong earthquakes, the model soil, especially the soil near the ground fissure, was severely damaged and exhibited reduced stiffness. As a result, its natural frequency also decreased from 11.41 Hz to 8.05 Hz, whereas the damping ratio increased from 4.8% to 9.1%. Due to the existence of ground fissure, the acceleration was amplified to nearly 0.476 m/s², as high as 2.38 times of the input acceleration magnitude. The maximum of acceleration and Arias intensity appeared at the fissure zone, which decreased from the main fissure toward both sides, showing hanging wall effects. The seismic intensity, duration and frequency spectrum all had certain effects on the seismic response of the ground fissure site, but their influence degrees were different. The seismic response of the site induced by the seismic wave that had richer low-frequency components and longer duration was larger. The discrepancies of seismic response between the hanging wall and the footwall declined obviously when the magnitude of the earthquake acceleration increased. The research results will be propitious to enhancing the utilizing ratio of the limited landing resource, alleviation of property damages and casualties, and provide a good engineering application foreground.

• Structural Engineering and Mechanics
• /
• v.81 no.2
• /
• pp.243-258
• /
• 2022

In this paper, tensile behavior of joint filling has been investigated under experimental test and numerical simulation (particle flow code). Two concrete slabs containing semi cylinder hole were prepared. These slabs were attached to each other by glue and one cubic specimen with dimension of 19 cm×15 cm×6 cm was prepared. This sample placed in the universal testing machine where the direct tensile stress can be applied to this specimen by implementing a special type of load transferring device which converts the applied compressive load to that of the tensile during the test. In the present work, two different joint filling thickness i.e., 3 mm and 6 mm were prepared and tested in the laboratory to measure their direct tensile strengths. Concurrent with experimental test, numerical simulation was performed to investigate the effect of hole diameter, length of edge notch, filling thickness and filling length on the tensile behavior of joint filling. Model dimension was 19 cm×15 cm. hole diameter was change in four different values of 2.5 cm, 5 cm, 7.5 cm and 10 cm. glue lengths were different based on the hole diameter, i.e., 12.5 cm for hole diameter of 2.5 cm, 10 cm for hole diameter of 5 cm, 7.5 cm for hole diameter of 7.5 cm and 5 cm for hole diameter of 10 cm. length of edge notch were changed in three different value i.e., 10%, 30% and 50% of glue length. Filling thickness were changed in three different value of 3 mm, 6 mm and 9 mm. Tensile strengths of glue and concrete were 2.37 MPa and 6.4 MPa, respectively. The load was applied at a constant rate of 1 kg/s. Results shows that hole diameter, length of edge notch, filling thickness and filling length have important effect on the tensile behavior of joint filling. In fixed glue thinks and fixed joint length, the tensile strength was decreased by increasing the hole diameter. Comparing the results showed that the strength, failure mechanism and fracture patterns obtained numerically and experimentally were similar for both cases.

• Structural Engineering and Mechanics
• /
• v.86 no.5
• /
• pp.607-619
• /
• 2023

This study, it was tried to evaluate the asphalt behavior under tensile loading conditions through indirect Brazilian and direct tensile tests, experimentally and numerically. This paper is important from two points of view. The first one, a new test method was developed for the determination of the direct tensile strength of asphalt and its difference was obtained from the indirect test method. The second one, the effects of particle size and loading rate have been cleared on the tensile fracture mechanism. The experimental direct tensile strength of the asphalt specimens was measured in the laboratory using the compression-to-tensile load converting (CTLC) device. Some special types of asphalt specimens were prepared in the form of slabs with a central hole. The CTLC device is then equipped with this specimen and placed in the universal testing machine. Then, the direct tensile strength of asphalt specimens with different sizes of ingredients can be measured at different loading rates in the laboratory. The particle flow code (PFC) was used to numerically simulate the direct tensile strength test of asphalt samples. This numerical modeling technique is based on the versatile discrete element method (DEM). Three different particle diameters were chosen and were tested under three different loading rates. The results show that when the loading rate was 0.016 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis till coalescence to the model boundary. When the loading rate was 0.032 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis. The branching occurs in these cracks. This shows that the crack propagation is under quasi-static conditions. When the loading rate was 0.064 mm/sec, mixed tensile and shear cracks were initiated below the loading walls and branching occurred in these cracks. This shows that the crack propagation is under dynamic conditions. The loading rate increases and the tensile strength increases. Because all defects mobilized under a low loading rate and this led to decreasing the tensile strength. The experimental results for the direct tensile strengths of asphalt specimens of different ingredients were in good accordance with their corresponding results approximated by DEM software.

• Journal of Powder Materials
• /
• v.31 no.1
• /
• pp.16-22
• /
• 2024

Composite-based piezoelectric devices are extensively studied to develop sustainable power supply and self-powered devices owing to their excellent mechanical durability and output performance. In this study, we design a lead-free piezoelectric nanocomposite utilizing (Ba_0.85 Ca_0.15)(Ti_0.9Zr_0.1)O₃ (BCTZ) nanomaterials for realizing highly flexible energy harvesters. To improve the output performance of the devices, we incorporate porous BCTZ nanowires (NWs) into the nanoparticle (NP)-based piezoelectric nanocomposite. BCTZ NPs and NWs are synthesized through the solid-state reaction and sol-gel-based electrospinning, respectively; subsequently, they are dispersed inside a polyimide matrix. The output performance of the energy harvesters is measured using an optimized measurement system during repetitive mechanical deformation by varying the composition of the NPs and NWs. A nanocomposite-based energy harvester with 4:1 weight ratio generates the maximum open-circuit voltage and short-circuit current of 0.83 V and 0.28 ㎂, respectively. In this study, self-powered devices are constructed with enhanced output performance by using piezoelectric energy harvesting for application in flexible and wearable devices.

• Journal of Powder Materials
• /
• v.31 no.2
• /
• pp.169-179
• /
• 2024

Colloidal quantum dot (QDs) have emerged as a crucial building block for LEDs due to their size-tunable emission wavelength, narrow spectral line width, and high quantum efficiency. Tremendous efforts have been dedicated to improving the performance of quantum dot light-emitting diodes (QLEDs) in the past decade, primarily focusing on optimization of device architectures and synthetic procedures for high quality QDs. However, despite these efforts, the commercialization of QLEDs has yet to be realized due to the absence of suitable large-scale patterning technologies for high-resolution devices., This review will focus on the development trends associated with transfer printing, photolithography, and inkjet printing, and aims to provide a brief overview of the fabricated QLED devices. The advancement of various quantum dot patterning methods will lead to the development of not only QLED devices but also solar cells, quantum communication, and quantum computers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.1
• /
• pp.78-90
• /
• 1993

This study was designed obtain and early detection the workers exposed to excessive copper dust and also to present biological exposure index. The exposed group consisted of 62 male workers at the metallurgy workplaces. To evaluate the degree of individual exposure the copper dust, each personal air sampling was collected. Biological exposures in the exposed group was quantified for the blood and urine copper levels using flameless atomic absorption spectrophotometer. The control group consisted of 70 male adults with the history of nonexposure to copper by the inhalation occupationally. The average concentration of copper in blood and urine of the exposed group was $49.44{\pm}8.90(29.05-80.63){\mu}g/dl$, $39.99{\pm}11.04(29.62-80.63){\mu}g/l$ respectively. The average concentration of air borne copper was $0.48{\pm}0.31(0.03-1.18)mg/m^3$. The average concentration of blood and urine copper in the control group was $42.93{\pm}5.84(25.05-57.85){\mu}g/dl$, $33.02{\pm}13.38(12.00-82.05){\mu}g/l$ respectively. The difference observed in the average concentration of blood and urine copper of the exposed and control groups was statistically significant seperately (blood copper, p<0.05 ; urine copper, p<0.05). The relationship between the individual exposure concentration of air borne copper and the concentration of the blood and urine copper was statistically significant, respectively (blood copper, r=0.54, p<0.05 ; urine copper, r=0.37, p<0.05). The relationship between the working duration and the concentration of blood and urine was not statistically significant respectively (blood copper, r=0.14 ; urine copper, r=0.12). The relationship between the age and the concentration of blood and urine copper was statistically not significant respectively (blood copper, r=013 ; urine copper, r=-0.06). The relationship between blood and urine copper concentration in the exposed group was statistically significant (r=0.62, p<0.05), and the relationship between blood and urine copper concentration in the control group was also statistically significant (r=0.39, p<0.05).

• Korean journal of applied entomology
• /
• v.51 no.2
• /
• pp.171-190
• /
• 2012

The Korean Society of Applied Entomology (KSAE) celebrates its First 50 years history this year, 2011. It began in the year 1962, as the Korean Society of Plant Protection (KSPP) to discuss all aspects of plant protection including entomology and plant pathology. At that time it was one of the earliest scientific ones among agricultural societies in Korea. Before liberation from the Japanese colonial rule there were a few scientific societies for Japanese scientists only in the Korean Peninsula. It seemed that there was a single exception, in medical field, formed by and operated for Korean ethnics. Right after the liberation, Korean scientists rushed to form new scientific societies in the fields of mechanical engineering, architecture, textile, internal medicine, biology, etc. in 1945, mathematics, chemistry, metallurgy, etc. in 1946, and so on. But agricultural scientists had to wait for more time before setting up their own scientific society, Korean Agricultural Society(韓國農學會), comprising all agricultural subfields, in 1954. They had annual meetings and published their own journal every year until 1962. Then those working in the plant protection field established their own KSPP, right after their section meeting in 1962. At that time the total number of participants for KSPP were only around 50. KSPP scientists were interested in plant pathology, agricultural chemicals, weed science, or bioclimate, besides entomology. They had annual meetings once or twice a year until 1987 and published their own journal, Korean Journal of Plant Protection (KJPP), once a year at the earlier years but soon gradually increasing the frequency to four times a year later. Articles on entomology and plant pathology occupied about 40% each, but the number of oral or posters were a little bit higher on plant pathology than entomology, with the rest on nematology, agricultural chemicals, or soil microarthropods. There also had a number of symposia and special lectures. The presidentship lasted for two years and most of president served only one term, except for the first two. The current president should be $28^{th}$. In the year 1988, KSPP had to be transformed into the applied entomology society, Korean Society of Applied Entomology (KSAE), because most of plant pathologists participating left the society to set up their own one, Korean Society of Plant Pathology in 1984. Since that time the Society concentrates on entomology, basic and applied, with some notes on nematology, acarology, soil microarthropods, agricultural chemicals, etc. The Society has been hosting annual meetings at least twice a year with special lectures and symposia, from time to time, on various topics. It also hosted international symposia including binational scientific meetings twice with two different Japanese (applied entomology in 2003 and acarology in 2009) societies and the Asia-Pacific Congress of Entomology in 2005. The regular society meeting of this year, 2011, turns out to be the 43rd and this autumn non-regular meeting would be the 42nd. It has been publishing two different scientific journals, Korean Journal of Applied Entomology (KJAE) since 1988 and the Journal of Asia-Pacific Entomology (JAPE) since 1998. Both journals are published 4 times a year, with articles written in Korean or English in the first, but those in English only in the latter with cooperation from the Taiwan Entomological Society and the Malaysian Plant Protection Society since 2008. It is now enlisted as one of those SCI(science citation index) extended. The highest number of topics discussed at their annual meetings was on ecology, behavior, and host resistance. But at the annual meetings jointly with the Korean Society of Entomology, members were more interested in basic aspects, instead of applied aspects, such as physiology and molecular biology fields. Among those societies related to entomology and plant protection, plant pathology, pesticide, and applied entomology societies are almost similar in membership, but entomology and plant pathology societies are publishing more number of articles than any others. The Society is running beautifully, but there are a few points to be made for further improvement. First, the articles or posters should be correctly categorized on the journals or proceedings. It may be a good idea to ask members to give their own version of correct category for their submissions, either oral or poster or written publication. The category should be classified detailed as much as possible (one kind of example would be systematics, morphology, evolution, ecology, behavior, host preference or resistance, physiology, anatomy, chemical ecology, molecular biology, pathology, chemical control, insecticides, insecticide resistance, biocontrol, biorational control, natural enemies, agricultural pest, forest pest, medical pest, etc.) and such scheme should be given to members beforehand. The members should give one or two, first and second, choices when submitting, if they want. Then the categories might be combined or grouped during editing for optimal arrangement for journals or proceedings. Secondly the journals should carry complete content of the particular year and author index at the last issue of that year. I would also like to have other information, such as awards and awardees in handy way. I could not find any document for listing awards. Such information or article categorization may be assigned to one of the vice presidents. I would rather strongly recommend that the society should give more time and energy on archive management to keep better and more correct history records.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.302-313
• /
• 2008

The purposes of this study are to investigate the concentration levels of fine particles, so called PM$_{2.5}$, to identify the affecting sources, and to estimate quantitatively the source contributions of PM$_{2.5}$. Ambient air sampling was seasonally carried out at two sites in Pohang(a residential and an industrial area) during the period of March to December 2003. PM$_{2.5}$ samples were collected by high volume air samplers with a PM$_{10}$ Inlet and an impactor for particle size segregation, and then determined by gravimetric method. The chemical species associated with PM$_{2.5}$ were analyzed by inductively coupled plasma spectrophotometery(ICP) and ion chromatography(IC). The results showed that the most significant season for PM$_{2.5}$ mass concentrations appeared to be spring, followed by winter, fall, and summer. The annual mean concentrations of PM$_{2.5}$ were 36.6 $\mu$g/m$^3$ in the industrial and 30.6 $\mu$g/m$^3$ in the residential area, respectively. The major components associated with PM$_{2.5}$ were the secondary aerosols such as nitrates and sulfates, which were respectively 4.2 and 8.6 $\mu$g/m$^3$ in the industrial area and 3.7 and 6.9 $\mu$g/m$^3$ in the residential area. The concentrations of chemical component in relation to natural emission sources such as Al, Ca, Mg, K were generally higher at both sampling sites than other sources. However, the concentrations of Fe, Mn, Cr in the industrial area were higher than those in the residential area. Based on the principal component analysis and stepwise multiple linear regression analysis for both areas, it was found that soil/road dust and secondary aerosols are the most significant factors affecting the variations of PM$_{2.5}$ in the ambient air of Pohang. The source apportionments of PM$_{2.5}$ were conducted by chemical mass balance(CMB) modeling. The contributions of PM$_{2.5}$ emission sources were estimated using the CMB8.0 receptor model, resulting that soil/road dust was the major contributor to PM$_{2.5}$, followed by secondary aerosols, vehicle emissions, marine aerosols, metallurgy industry. Finally, the application and its limitations of chemical mass balance modeling for PM$_{2.5}$ was discussed.

• Korean Journal of Materials Research
• /
• v.8 no.12
• /
• pp.1165-1169
• /
• 1998

A single crystal cast blade was manufactured by CMSX 6, one of the first generarion nickel based single crystal superalloys by the selector method in a vacuum furnace. The single crystal has been grown with cooling rate of 2.5 mm/min, after pouring the molten alloy of 163$0^{\circ}C$ to the mold heated to 150$0^{\circ}C$. The cast structure could be classified into matrix (dendrite) and eutectic regions in ${\gamma}$'shape and size. The eutectic region showed higher Ti content. As the additional results of ${\gamma}$'precipitates by EPMA and CBED analysis the ${\gamma}$'size was less than 0.5~0.7$\mu\textrm{m}$, showing the chemical composition close to Ni$_3$Al of Ll$_2$ lattice structure. But ${\gamma}$'size has increased to bigger than 1.0$\mu\textrm{m}$, being near to eutectic region, changing its shape to bar or huge block types. These showed the chemical structure near to Ni$_3$Ti of D $O_{24}$ lattice structure. Therefore, ${\gamma}$'morphology of dendrite and eutectic regions depends absolutely on its chemical composition and lattice structure.