• 한국공작기계학회논문집
• /
• 제14권5호
• /
• pp.80-86
• /
• 2005

High velocity oxy-fuel thermally sprayed coating of the WC-Co cermet material is a well-established process for modifying the surface properties of the structural components exposed to the corrosive and wear attacks. The hard WC phase in the coating resists to the wear while the soft metallic Co increases the adhesive and cohesive bonding properties. The coating properties deposited by the HVOF process are greatly dependent on the feedstock materials and processing parameters. The effects of the feedstock material and process coating parameters including the in-flight particle parameters and resultant coating microstructures were observed in this paper.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.413-414
• /
• 2012

Programmable Metallization Cell (PMC) memory, which utilizes electrochemical control of nanoscale quantities of metal in thin films of solid electrolyte, shows great promise as a future solid state memory. The technology utilizes the electrochemical formation and removal of metallic pathways in thin films of solid electrolyte. Key attributes are low voltage and current operation, excellent scalability, and a simple fabrication sequence. In this study, we investigated the nature of thin films formed by photo doping of Ag+ ions into chalcogenide materials for use in solid electrolyte of programmable metallization cell devices. We measured the I-V characteristics by field-effect of the device. The results imply that a Ag-rich phase separates owing to the reaction of Ag with free atoms from chalcogenide materials.

• Journal of Magnetics
• /
• 제1권1호
• /
• pp.4-8
• /
• 1996

Employing the LMTO band method, we have studied electronic and magnetic properties of Fe/Si/Fe trilayer in which the z-direction is chosen to be (111) direction of FeSi with B2 phase, We have also determined electronic structure of bulk FeSi, as a reference material. The ground state of FeSi is paramagnetic insulator with a band gap of 0.05 eV. Band structures of Fe/Si/Fe with varying the thickness of the spacer layer reveal that the spacer layer is metallic, and the states along the growth direction do not disperse much reflecting a two-dimensional nature. Magnetic moment of Fe atom in the interfacial layer of Fe/Si/Fe is reduced a lot as compared to the bulk value, suggesting a strong hybridization between Fe and Si states. The geometry of the Fermi surface indicates that the magnetic coupling period of ~8ML (monolayers) in Fe/Si/Fe is explained with a short Fermi wave vector of bcc Si.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1995년도 광학 및 양자전자학 워크샵 논문집
• /
• pp.18-23
• /
• 1995

광도파로와 반도체 광증폭기를 직접하여 1.3$\mu$m 과장대에서 동작하는 2x2 InGaAsP/InP LD-gate형 광스위치를 제작하였다. 광스위치의 특성으로 광섬유 입출력간의 총삽입 손실이 6~10dB 이었고, 소광비가 40dB 이상으로서 세계적인 수준의 양호한 결과를 얻었다. 제작된 광스위치는 광도파로와 반도체 광증폭기 간의 높은 광 결합 효율을 얻기 위하여 RIE(Reactive Ion Etching) 에 의한 건식 식긱과 4회에 걸친 OMVPE(Organo Metallic Vapor Phase Epitaxy) 결정 성장을 이용하였으녀, 수동 도파로와 LD 사이의 광 결합 효율이 '90% 이상이 됨을 확인하였다. d;라힌 결과는 광집적화의 연구에 상당한 기에를 할 것으로 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3225-3227
• /
• 2010

The thermal conductivity of layered metal chalcogenides such as $MT_2$ (M = Mo, W; T = S, Se) shows a marked decrease after exfoliation and subsequent restacking process. Random stacking of two-dimensional crystalline sheets circumvents thermal conduction pathways along a longitudinal direction, which results in a reduction in thermal conductivity. $WS_2$ and $WSe_2$ compounds retain p-type conducting behavior after exfoliation and restacking with decreased electrical conductivity due to the change in carrier concentration. $MoSe_2$ compound exhibits metallic behavior < $130^{\circ}C$ with a small Seebeck coefficient, which results from metastable 1T-$MoSe_2$ structure of the restacked phase.

• Corrosion Science and Technology
• /
• 제4권1호
• /
• pp.23-28
• /
• 2005

Several plasma-sprayed ceramic coatings with two- and three-layers were characterized and tested for the application of cooling tube coatings of oxygen convert gas recovery system (OG cooling system) in the steel making plant. Thermal cycling tests using a torch heating with compressed air cooling were carried out and characterized before and after the tests. The effects of metallic bond coat as well as ceramic top coat were also studied. Possible failure mechanisms with low carbon steel substrate were assessed in term of microstructure, porosity, bond strength, thermal expansion coefficient, and the phase transformation. Finally, the results of field tests at the OG cooling system are presented and discussed their microstructural degradation. Test results have shown that three-layered coatings perform better than two-layered coatings.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1033-1034
• /
• 2006

Metallic compound of ternary Al-B-C system was prepared by mechanical alloying (MA) using Al, boron and graphite powders as starting materials. MA was carried out using Spex 8000 mixer/mill for 50 hours in an argon atmosphere without process control reagent such as methyl alcohol. The MA powders obtained were heat-treated in vacuum at the temperature of 873 and 1273 K for 5 hour. Pure ternary Al-B-C compound was obtained in the chemical content of Al:B:C=55:27:18. The ternary compound obtained in this study has a new phase whose crystal structure is not identified yet.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.352-354
• /
• 2010

The effects of Au addition on the structure and the superconducting properties of Bi system bulk have been investigated. Au exists in the metalic form in above materials. It does not affect the formation and structure of the BiSrCaCuO(2223) phase. The superconducting transition temperature Tc does not change for $Bi_{1.7}Pb_{0.3}Sr_2Ca_2Cu_3O$ composite However Au doping can make the grains smaller. Metallic Au can make gathers on the grains boundary and lead to the increment of critical transport current density. The current density of $Bi_{1.7}Pb_{0.3}Sr_2Ca_2Cu_3Au_{0.5}O$ was 1000A/$cm^2$ at liquid nitrogen temperature.

• 한국전기전자재료학회논문지
• /
• 제11권9호
• /
• pp.727-732
• /
• 1998

Ag-deposited graphite powder was prepared by a chemical reduction method of metal particles onto graphite powder. X-ray diffraction observation of Ag-deposited graphite powder revealed that silver existed in a metallic state, but not in an oxidized one. From SEM measurement, ultrafine silver particles were highly dispersed on the surface of graphite particles. Cylindrical lithium ion secondary battery was manufactured using Ag-deposited graphite anodes and $LiCoO_2$ cathodes. The cycleability of lithium ion secondary battery using Ag-deposited graphite anodes was superior to that of original graphite powder. The improved cycleability may be due to both the reduction of electric resistance between electrodes and the highly durable Ag-graphite anode.

• ETRI Journal
• /
• 제36권6호
• /
• pp.1062-1065
• /
• 2014

A novel substrate-integrated waveguide (SIW) cavity-backed slot antenna is proposed in this study to achieve enhanced-gain performance. The peak gain is remarkably improved with the use of an SIW cavity and metallic superstrate. The superstrate comprises a single rectangular slot window and two half-wavelength patches. The gain can be enhanced by combining the in-phase radiating fields. Further, the 10 dB bandwidth of the proposed antenna ranges from 2.32 GHz to 2.49 GHz, which covers the wireless local area network band. The measured peak gain is 9.44 dBi at 2.42 GHz.