• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.279-285
• /
• 2012

The co-precipitation technique has been applied to synthesize Biphasic Calcium Phosphate (BCP), Mg-BCP and Si-BCP. X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy were used to characterize the structure of synthesized BCP, Mg-BCP and Si-BCP powders. The results have shown that BCP and substitution of magnesium and silicon in the calcium deficient apatites revealed the formation of biphasic mixtures of Hydroxyapatite (HAp)/${\beta}$-Tricalcium phosphate (${\beta}$-TCP) ratios after heating at $1000^{\circ}C$. Ionic substituted BCP is able to develop a new apatite phase on the surface in contact with physiological fluids faster than BCP does. An MTT assay indicated that BCP, Mg-BCP, and Si-BCP powders had no cytotoxic effects on MG-63 cells, and that they have good biocompatibility.

• Korean Journal of Materials Research
• /
• v.13 no.8
• /
• pp.537-542
• /
• 2003

($Y_{l-x}$ $Gd_{x}$ )$O_2$$_3$: $Eu^{ 3＋}$ red phosphors were prepared with the solvothermal synthesis using the 2-methoxy-ethanol solvents and the emission intensity was investigated that applied with the 254 nm wavelength and the maximum excitation wavelength for energy source. The used solvents for the solvothermal synthesis were made of nitrate salt solutions of Y, Gd and Eu. These solutions dropped in autoclave have be reacted with the solvothermal synthesis at $200^{\circ}C$ for 5hrs and the red phosphors prepared here in were showed the pure cubic phase after annealing at $1000∼1200^{\circ}C$. The brightness of ($Y_{l-x}$ $Gd_{x}$)$_2$$O_3$: $Eu^{3＋}$ phosphors particles was increased as an increase of Gd ratio. The maximum excitation wavelengths of ($Y_{l-x}$ $Gd_{x}$ )$_2$$O_3$: $Eu^{3＋}$ / phosphors particles were increased according to increasing Gd ratio from 253 nm to 259 nm wavelength. The maximum emission intensity of $Gd_2$$O_3$: $Eu^{3＋}$ (Y/Gd = 1/0) phosphors particles under UV 259 nm was found to be higher than the commercial product of $Y_2$$O_3$: $Eu^{3＋}$ phosphors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4117-4123
• /
• 2013

In the present study, coating corrosion characteristics of the heat exchanger for sea water are experimentally investigated. Coating types by a teflon, an electrodeposition and a ceramic+silicon were tested and compared with the corrosion characteristics of an aluminum. For the acceleration of corrosion by sea water, the temperature of sea water $70^{\circ}C$ and the concentration of salt 3.5% were considered. And the specimens were immersed in sea water during 9 weeks. Coating corrosion characteristics were measured by using the impedance method and SEM. Experimental results showed that polarization resistances obtained from Bode plot were related to the corrosion resistance of coating types, and the corrosion resistance of double coating were maintained during 4 weeks. From SEM photograph, we saw that blisters was generated on the interface between metal and coating.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.64-74
• /
• 2016

Titanium and iron are closely related in nature, although titanium is the ninth most abundant element in the Earth's crust. Iron in titanium ores must be removed for use as feedstocks in the manufacture of titanium dioxide pigments and pure $TiCl_4$ for metal titanium. In this study, various beneficiation processes of ilmenite for production of $TiO_2$ have been reviewed and compared. Most of these processes involve a combination of pyrometallurgy and hydrometallurgy. These beneficiation processes of ilmenite generate considerable quantities of wastes primarily in the form of iron salt, iron oxide and acidic effluents. Therefore, it is important that recovery of acid value from waste and conversion of iron bearing waste to useful materials for development of new beneficiation processes of ilmenite.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.382-388
• /
• 2000

Polymer electrolyte films consisting of poly(vinylidenefluoride-hexafluoropropylene) (PVdF-HFP), LiClO$_3$ and a mixture of ethylene carbonate (EC) and ${\gamma}$-butyrolactone (GBL) were examined in order to obtain the best compromise between high ionic conductivity, homogeniety, dimensional and electrochemical stability. Measurements of ionic conductivity, differential scanning calorimetry and linear sweep voltammetry have been carried out for various compositions. The highest conductivity of 3.8$\times$10$^{-3}$ S$cm^{-1}$ / at 3$0^{\circ}C$ were obtained for a film of 30(PVdF-HFP)+7.8LiClO$_4$+62.2EC/GBL. From the DSC study, it has been found that the PVdF-HFP gels are stable up to 10$0^{\circ}C$, and the salt lowers the melting temperature of crystalline part of PVdF by interacting sensitively with polymer segments. When Lithium metal is in contact with the gel films, it tends to undergo corrosion and the reaction products accumulate resulting in the formation of a passive film on Li electrode. As the aging time progresses, the interfacial resistance increases continuously. Anodic stability is measured to extend up to about 4.5 V vs. Li.

• Elastomers and Composites
• /
• v.40 no.1
• /
• pp.59-65
• /
• 2005

Zinc methacrylate(ZMA) was incorporated into ethylene-propylene diene rubber(EPDM) by direct mixing of the metal salt with the rubber or was in-situ prepared in the rubber matrix through neutralization reaction of zinc oxide(ZnO) and methacrylic acid(MAA). Tensile and tear tests showed that ZMA had a great reinforcing effect for the EPDM. It was also found that ZMA reinforced EPDM vulcanizates can retain their mechanical properties under thermo-oxidative aging. Moreover the incorporation of ZMA induces a substantial improvement in the adhesive strength of the EPDM onto aluminum substrate. The reinforcing effect and an enhancement in adhesion was greatly manifested when the ZMA is in-situ formed with an excess amount of ZnO. The extraordinary improvement in the properties is supposed to be related with the formation of ionic crosslink as well as the degree of dispersion or ZMA domain in the rubber matrix.

• YAKHAK HOEJI
• /
• v.41 no.4
• /
• pp.421-432
• /
• 1997

A new lectin was partially purified from starfish,Asterina pectinifera by means of physiological saline extraction, salt fractionation, ion exchange chromatography and hy droxyapatite chromatography, and it was named APL. The biochemical properties of the APL were characterized. In addition, its effects on lymphocyte mitogenicity and cancer cell agglutinability were tested. The APL agglutinated nonspecifically human erythrocytes and rabbit blood cells. Agglutinability was decreased to 30% of control activity below pH 5 and above pH 9 and was relatively unstable at increasing temperatures above 60$^{\circ}C$. The activity was reduced by addition of two kinds of metal ions, $Ba^{2+},\;Mn^{2+}$ and chelating agent, EDTA. APL was proved to be glycoproteins containing 9% sugars. For carbohydrate specificity, it was found that the activity of APL was inhibited by D(+)-glucosamine, D(+)-galactosamine, stachyose, N-acetyl-galactosamine and methyl-${\alpha}$-D-galactopyranoside among 35 sugars tested. In amino acid composition, the contents of acidic amino acids such as aspartic acid and glutamic acid were relatively high. This result suggest that the isoelectric point would be in a lower range. APL was found that it promotes the division of human lymphocytes. APL was proved to be a potent agglutinin for cancer cells such as HeLa, L929 and L1210 cells. Significant changes on the HeLa cell surfaces affected by APL were observed under the electron microscope.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.139-165
• /
• 2019

The current status and prospect of decommissioning technology development at KAERI are reviewed here. Specifically, this review focuses on four key technologies: decontamination, remote dismantling, decommissioning waste treatments, and site remediation. The decontamination technologies described are component decontamination and system decontamination. A cutting method and a remote handling method together with a decommissioning simulation are described as remote dismantling technologies. Although there are various types of radioactive waste generated by decommissioning activities, this review focuses on the major types of waste, such as metal waste, concrete waste, and soil waste together with certain special types, such as high-level and high-salt liquid waste, organic mixed waste, and uranium complex waste, which are known to be difficult to treat. Finally, in a site remediation technology review, a measurement and safety evaluation related to site reuse and a site remediation technique are described.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.526-531
• /
• 2011

The present study attempted to impregnate alkali metals to amino acid in order to improve $CO_2$ absorption capacity. A used amino acid was glycine, of which pH increased up to about 11 with the addition of alkalies. $CO_2$ absorption capacity of amino acid salts was evaluated in a batch and a continuous process. The absorption capacity appeared in turns as; Sodium Glycinate ${\geq}$ Lithium Glycinate > Potassium Glycinate. Amino acid salts showed lower absolute capacity of $CO_2$ absorption than primary amine (Monoethanolamine) at $20^{\circ}C$. In a continuous absorption with 10% $CO_2$ flow, the increasing the reaction temperature, the increasing rate of absorption for amino and was higher that of than amino absorbent.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1206-1212
• /
• 2022

Cold-crucible induction melting (CCIM) technology has been intensively studied as an advanced vitrification process for the immobilization of highly radioactive waste. This technology uses high-frequency induction to melt a glass matrix and waste, while the outer surface of the crucible is water-cooled, resulting in the formation of a frozen glass layer (skull). In this study, for the fabrication of borosilicate glass waste form, CCIM operation test with 60 kg of glass per batch was conducted using surrogate wastes composed of Cs, Sr, and Nd as a representative of highly radioactive nuclides generated during spent nuclear fuel management. A 60 kg-scale glass waste form was successfully fabricated through melting and draining processes using a CCIM system, and its physicochemical properties were analyzed. In particular, to enhance the controllability and reliability of the draining process, an air-cooling drain control method that can control draining through air-cooling near drain holes was developed, and its validity for draining control was verified. The method can offer controllability on various draining processes, such as molten salt or molten metal draining processes, and can be applied to a process requiring high throughput draining.