• Resources Recycling
• /
• v.10 no.5
• /
• pp.3-7
• /
• 2001

Indium frequently associated with the semiconductor industry is becoming an important metal element widely used in industry. In this paper, its properties especially in relation to its recovery from scrap are reviewed and discussed. Also presented in this paper is how best indium can be recovered by the hydrometallurgical means.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.182-184
• /
• 2004

GTAW of titanium using flux cored wire was exploited. Flux cored wire with MgF$_2$ resulted in 60% deeper penetration than conventional active GTAW which applys fluxes in the form of paste. Emission spectroscopy of the arc with MgF$_2$ showed Ti II peak, indicating higher temperature arc. Elux cored wire formed weld metal with reasonably low oxygen content.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1999.04a
• /
• pp.51-52
• /
• 1999

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.87-101
• /
• 1999

This study has been carried out to examine the feasibility of washing technique for reducing the heavy metal contamination level of tailing wastes and agricultural soil surrounding abandoned metal mines. Some organic acids with low molecular weight were used as washing solution. Initial contamination levels of copper and lead for some soil samples were found to exceed the standard levels of countermeasure and concern, and those of cadmium to approach the standard level of countermeasure. Experimental results using sequential extraction method revealed that more than half of copper and lead existing in tailing wastes are adsorbed forms available for plants. There are some proportional relationships between metal concentrations determined by using 0.1N HCI solution and those determined by sequential extractions. Citric acid was turned out to be superior to oxalic acid and acetic acid with low molecular weight in washing above three metals. When citric acid is used for washing heavy metals from soil, it is desirable to operate at pH less than 5.5 for better washing effect. Metal removal effect by citric acid solution has been proved to depend upon solution concentration and the mass ratio of solution to soil. Addition of SDS(Sodium Dodecyl Sulfate) to citric acid improved the washing effect of cadmium among three metal most significantly. while copper removal did not change. Washing technique using citric acid for removal of heavy metals from agricultural soil or tailing wastes is recognized to be an effective remediation method.

• Journal of Environmental Health Sciences
• /
• v.38 no.4
• /
• pp.323-331
• /
• 2012

Objectives: The objective of this study was to investigate the possible effects of environmental cadmium (Cd) exposure on of bone mineral density (BMD) levels. Methods: A total of 171 residents around abandoned mines in Chungcheongnam-do were surveyed in 2008-2011. Urinary Cd and BMD were analyzed by atomic absorption spectrometry and Dual-Energy X-ray absorptionmetry, respectively. Osteoporosis and osteopenia were defined by T-scores set by the WHO; Tscore ${\geq}$ -1.0, normal; -1.0 > T-score > -2.5, osteopenia; and T-score ${\leq}$ -2.5, osteoporosis. Logistic and multiple linear regressions were applied to estimate the association between U-Cd levels and BMD. Results: The U-Cd geometric mean of 171 Koreans was 2.79 ${\mu}g/g{\cdot}cr$. The U-Cd concentration was significantly higher among women (2.98 ${\mu}g/g{\cdot}cr$) than men (2.39 ${\mu}g/g{\cdot}cr$). With the multiple regression model, the BMD was influenced by U-Cd, BMI, and monthly income. With the logistic regression model, osteoporosis was associated with U-Cd levels (OR = 3.239, 95% CI = 1.770-5.927). Conclusions: We conclude that exposure to cadmium is associated with an increased risk of osteoporosis.

• Resources Recycling
• /
• v.10 no.1
• /
• pp.49-55
• /
• 2001

The strategy of recovering metals from scrap is in general much different from primary sources. One of the main differences between the treatment of scrap and that of primary sources lies with the fact that metals are frequently associated with other met-als to form alloys in scrap, while metals occur in primary sources as oxides or sulfides. In this paper, factors affecting the dis-solution behavior of metals from various alloy systems have been reviewed and discussed. Specific examples have been drawn from Au/Ag, Au/cu and Ag/cu systems. Results of the dissolution behavior of various metals from these alloys have been reviewed and compared to the dissolution behavior of single metal systems in various lixiviants such as acids, cyanide and ammonia. It has been observed that the presence of other metals in alloys would significantly affect the dissolution rate of the metal in question. The leaching behavior of metals from homogeneous alloys relies on the chemical interaction between atoms in the lattice of the alloys, while that from heterogeneous alloys is affected by galvanic interaction established in the solution The manner in which the dissolution of a certain metal is influenced by surrounding metals has been discussed in terms of pas-sive and noble nature of the metal in relation to the neighboring metals. The role of the standard electrochemical Potential of these metals on the selective dissolution for a given lixiviant has also been discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.984-999
• /
• 2010

A long-term field demonstration experiment of selected stabilization method to reduce the heavy metal mobility in farmland soil contaminated by heavy metals around abandoned mine site was conducted. Field demonstration experiments were established on the contaminated farmland with the wooden plate(thickness=1cm) which dimension were width=200cm, Length=200cm, height=80cm and filled with treated soil, which was mixed with lime stone and steel refining slag except on control plot. Soil samples in the plots were collected and analyzed during the experiment period(2008. 2~2008. 8) after the installation of the plots. Field demonstration experiments results showed that the application ratio of lime stone 5% was effective for immobilizing heavy metal components in contaminated farmland soil.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.55-60
• /
• 2009

Stabilization treatment is one of processes for wastes and their components to reduce their toxicity and migration rates to surroundings. Inorganic binders such as calcium hydroxide, blast furnace slag and red mud were tested for their potential applicability to in-situ stabilization of heavy metal contaminated tailings in the abandoned metal mines. Columns(150mm dia. ${\times}$ 450mm length) filled with mixtures of inorganic binders and tailing from the Geumjang mine with various mixing ratios of binders to tailings, 5%, 7% and 9% were applied artificial rainfall tests for 28 days. Effluents from columns filled with calcium hydroxide and tailing showed high pH's of ~12.5 and a increasing trend of concentration in Pb and Zn with a significant decrease in permeability in terms of elapsed days. Those with burning slag and tailing showed pH's of ~8.5 and significantly low concentrations in heavy metals with a stable permeability. In case of red mud, effluents showed significantly low concentrations in heavy metals but a decreased permeability with pH's of ~10.5. Conclusively, this basic study suggests burning furnace slag be a potential stabilizer for effective treatment of heavy metal contaminated mine tailings.

• Journal of Environmental Health Sciences
• /
• v.36 no.6
• /
• pp.456-464
• /
• 2010

Recently, heavy metals contamination of the agricultural soil and crops surrounding mining areas has been identified as one of the most serious environmental problems in South Korea. The Ministry of the Environment in Korea conducted a Preliminary National Environmental Health Survey (PNEHS) in abandoned metal mines in 2007. The priority for a subsequent detailed examination was ranked from the results of PNEHS. The studied mine which was ranked as being of the highest priority is located in the midwestern part of Korea and was operated from 1911 to 1985. In this study, the contamination levels of the heavy metals in the abandoned metal mine were investigated. From the results, the average daily dose (ADD), target hazard quotient (THQ) and target cancer risk of the heavy metals were evaluated. The concentration of arsenic (As) in all of the tailings from the mine was higher than its countermeasure standard of Korea. In particular, the highest concentration of As, 330 mg/kg, was up to 15 times higher than its countermeasure standard. The average concentration of As in agricultural soils was higher than the warning standard of Korea, and higher than its countermeasure standard at six sites. The average concentrations of the analyzed heavy metals in agricultural soil were below the warning standard, but concentrations of cadmium (Cd) and lead (Pb) at 4 sites were higher than its warning standard. The average concentration of As in surface water exceeded the warning standard of Korea. The value of the THQ of As for the tailings was higher than the health protection standard 1. The value of THQ of As for the farmlands was lower than the standard, while the hazard index (HI) of As was higher than the standard. The value of target cancer risk (TCR) of As, $6.44{\times}10^{-4}$, were higher than the health protection standard of a lifetime risk for TCR at $1{\times}10^{-6}$. This suggests that the residents around the metal mines are exposed to As pollution with a carcinogenic risk.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.2
• /
• pp.105-111
• /
• 1993

This study was carried out to find heavy metal contents in soil and in native plant in the regions near by zinc-mines, located at the Chilgok and Uljin Gun in Kyeongpook area. In the heavy metal contents during the to growth of native plants, Cd was contained in the order perennial > biennial > annual plant, but Cu was annual > perennial > biennial plant, and there was no difference in Zn contents. The native plants contained heavy metal highest were Osmunda japonica in Cd, Persicaria thunbergii H.G in Cu and Equisetum arvense L. in Zn. Cd was contained highest in Pteridaceae, Cu in Equisetaceae and Zn in Polygonaceae. In the heavy metal contents by the part of plant of Equisetum arvense L. and Erigeron canadensis, Cd and Zn were much contained in the order leaf > stem > root, but Cu was in the order root > leaf > stem. The average contents of Cd, Cu, Zn in soil were 1.27ppm. 12.04ppm. 64.28ppm in Chilgok, and 3.30ppm. 72.93ppm. 194.04ppm in Uljin respectively. There were positive correlations between Cd contents of heavy metals(Cd, Cu, Zn) in soil and in native plant, but not significant. It was estimated that Osmunda japonica, Pteridium aquilinum (KUHN) var and Equisetum arvense L. which most absorbed heavy metal have effect of exclusion of heavy metals near by zine-mines region.