• 비파괴검사학회지
• /
• 제21권4호
• /
• pp.425-433
• /
• 2001

복합재료-금속 접착접합부가 사용 중 반복 하중을 받을 때 발생하는 피로 손상도를 음향초음파(acousto-ultrasonics; AU)법과 음향방출(acoustic emission; AE)법을 이용하여 평가하였다. 피로시험에는 단일겹치기(single-lap) 시험편을 사용하였으며, AU법을 통해 취득한 신호로부터 음향초음파변수(acousto-ultrasonic parameters; AUP)와 피로손상과의 상관관계 곡선을 얻고, AE법에서는 누적 AE events를 통한 피로손상과의 상관관계 곡선을 얻어, AU법과 AE법의 결과를 비교하였다. 이 곡선들은 피로손상에 의한 고분자기지 복합재료의 강성 저하$(E/E_0)$를 나타내는 곡선과 매우 유사하며, 이를 바탕으로 피로 손상도의 예측과 잔여 수명의 예측이 가능하다. 또한 피로 하중의 초기 단계와 피로손상의 누적에 의해 급격한 변화가 나타나는 단계의 파형 주파수 성분을 비교하여, 피로 파괴의 마지막 단계에서 나타나는 신호 중에는 본격적인 피로손상에 의해 발생하는 AE 신호 성분이 포함되어 있음을 확인할 수 있었다.

• 대한금속재료학회지
• /
• 제56권11호
• /
• pp.835-843
• /
• 2018

In this work, we report a delta rosette strain sensor based on highly stretchable silver nanowire (AgNW) percolation piezoresistors. The proposed rosette strain sensors were easily prepared by a facile two-step fabrication route. First, three identical AgNW piezoresistive electrodes were patterned in a simple and precise manner on a donor film using a solution-processed drop-coating of the AgNWs in conjunction with a tape-type shadow mask. The patterned AgNW electrodes were then entirely transferred to an elastomeric substrate while embedding them in the polymer matrix. The fabricated stretchable AgNW piezoresistors could be operated at up to 20% strain without electrical or mechanical failure, showing a maximum gauge factor as high as 5.3, low hysteresis, and high linearity ($r^2{\approx}0.996$). Moreover, the sensor responses were also found to be highly stable and reversible even under repeated strain loading/unloading for up to 1000 cycles at a maximum tensile strain of 20%, mainly due to the mechanical stability of the AgNW/elastomer composites. In addition, both the magnitude and direction of the principal strain could be precisely characterized by configuring three identical AgNW piezoresistors in a delta rosette form, representing the potential for employing the devices as a multidimensional strain sensor in various practical applications.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Composites Research
• /
• 제29권1호
• /
• pp.40-44
• /
• 2016

원자력발전소에서 사용되고 있는 핵연료 피복관은 핵분열 생성물들의 외부 유출을 방지하기 위해 고온 고압의 냉각수 분위기에서 우수한 산화저항성을 가져야 한다. 그러나 후쿠시마 원전사고의 LOCA(Loss-Of-Coolant-Accident)와 같은 중대사고에서 핵연료의 피복관과 수증기 사이의 격렬한 반응으로 인해 급격한 고온산화를 동반한 다량의 수소발생으로 수소폭발을 방지하기 위한 핵연료의 개발이 요구되고 있다. 이에 따라 핵연료 피복관의 안전성 향상을 위해 내방사선성이 우수하며 높은 강도와 산화, 부식에 대한 내화학적 안정성 및 우수한 열전도도 의 특성을 갖는 SiC와 같은 구조용 세라믹스가 활발히 연구되고 있다. $SiC_f/SiC$ 복합체 보호막 금속 피복관은 지르코늄 피복관 튜브에 SiC 섬유를 필라멘트 와인딩 한 후 Polycarbosilane을 polymer로 함침하여 기지상을 형성하는 공정을 이용하였다. 따라서 이렇게 제조한 $SiC_f/SiC$ 복합체 금속 피복관을 Drop Tube Furnace를 이용한 열충격에 따른 시편의 산화 및 미세조직을 분석하였다.

• 한국융합학회논문지
• /
• 제13권4호
• /
• pp.331-337
• /
• 2022

전기자동차용 배터리 하우징 소재로 사용되고 있는 금속 소재에서 경량소재로 대체하기 위한 열가소성복합재료를 제조하였다. 매트릭스 소재는 고분자 소재인 나일론 6를 사용 하였으며 방열 성능을 부여하기 위해 열전도도가 높은 Boron Nitrate(BN)를 사용하였다. 동일한 필러의 함량 및 입자 크기에 따른 열전도성 고분자 복합재료의 방열 특성을 분석하였다. 필러의 함량이 증가할수록 열전도도 값이 증가하였으며, 입자크기가 60~70㎛인 BN의 함량이 50%인 복합재료의 경우 1.4W/mK 이상 열전도도를 나타내었다. 입자 크기가 클수록 입자 간 계면 접촉면이 넓어져 Thermal path가 이루어짐을 확인하였다. 제조된 열전도성 고분자복합재료를 이용하여 배터리 하우징을 제작하였으며 셀의 충방전 동안 온도 변화를 관찰하여 배터리 하우징의 대체 소재로서의 가능성을 확인하였다.