• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.147-150
• /
• 1998

• 한국환경보건학회지
• /
• 제9권2호
• /
• pp.75-81
• /
• 1983

The Biochemical Oxygen Demand(BOD) indicates that microbes are proliferating or that oxygen is being spent by breathing action when examining water under the same aerobic condition. In this research of the mesurement of BOD are the poisonous elements of heavy metal ions such as Cu-ion, Cr-ion, Pb-ion and Zn-ion. They exert an unfavorable influence in the analysis of BOD and research was performed to provide certain data of minimum negative influence by the poisonous matters. The results of the research confirm that heavy metal ion(Cu, Cr, Pb, Zn) do direct an influence upon the normal growth of aerobic microbes in actual tests of chemical analysis of portable water or sewage. The most critical concentration for a negative effect on lowering oxygen quantity and disturbing the aerobic mocrobes normal growth was found to be 0.01 mg/l. Therefore, test results are not valid if the heavy metal concentration is to or greater than 0.0mg/l, To improve comprehension through out the research the author uses the following abbreviations: 1. The Cu-ion is to be excluded before experimental analysis if it is over 0.01mg/l inorder to obtain a real value for the BOD. 2. The Cr-ion is to be excluded before experimental analysis if it is over 0.01mg/l in order to obtain a real value for the BOD. 3. The Pb-ion is to be excluded before experimental analysis if it is over 0.01mg/l in order to obtain a real value for the BOD. 4. The Zn-ion is to be excluded before experimental analysis if it is over 0.01mg/l in order to obtain a real value for the BOD.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2483-2487
• /
• 2010

Pseudo-first-order rate constants ($k_{obsd}$) were measured spectrophotometrically for nucleophilic substitution reactions of 4-nitrophenyl picolinate (6) with alkali metal ethoxides (EtOM, $M^+\;=\;K^+$, $Na^+$ and $Li^+$) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plot of $k_{obsd}$ vs. [EtOM] exhibits upward curvature regardless of the nature of $M^+$ ions. However, the plot for the reaction of 6 with EtOK is linear with significantly decreased $k_{obsd}$ values when 18-crown-6-ether (18C6, a complexing agent for $K^+$ ion) is added in the reaction medium. Dissection of $k_{obsd}$ into $k_{EtO^-}$ and $k_{EtOM}$ (i.e., the second-order rate constant for the reaction with dissociated $EtO^-$ and ion-paired EtOM, respectively) has revealed that ion-paired EtOM is 3~17 times more reactive than dissociated $EtO^-$. The reaction has been proposed to proceed through a 5-membered cyclic transition state, in which $M^+$ ion increases the electrophilicity of the reaction site. Interestingly, $Na^+$ ion exhibits the largest catalytic effect. The presence of a nitrogen atom in the pyridine moiety of 6 has been suggested to be responsible for the high $Na^+$ ion selectivity.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제28권6호
• /
• pp.16-23
• /
• 2023

Heavy metal (Zinc, Cadmium, Lead) adsorption onto surface modified activated carbon was performed in order to better understand the effect of sodium ion addition to activated carbon. Surface modification methods in this research included water washing, nitric acid washing, and sodium addition after nitric acid washing. These surface modifications generated oxygen functional groups with sodium ions on the surface of the activated carbon.. This caused the change of the specific surface area as well as in the ratio of the carboxyl groups. Heavy metal adsorption onto sodium-containing activated carbon was the most among the three modifications. After the adsorption of heavy metals, the carboxyl group ratio decreased and sodium ions on the surface of the activated carbon were almost non-existent after the adsorption of heavy metals onto sodium-containing activated carbon. The results from this research indicated that ion exchange with sodium ions in carboxyl groups effectively improved heavy metal adsorption rather than electrostatic adsorption and hydrogen ion exchange.

• 한국수산과학회지
• /
• 제31권2호
• /
• pp.267-271
• /
• 1998

추출조건에 따른 다시마 alginate의 성질을 조사하기 위해 추출용매인 $Na_{2}CO_{3}$의 농도를 $1\%,\;3\%$, 및 $5\%$로 조절하고, 추출시간을 1, 3, 5 및 10시간으로 하였을 때 각 추출조건에서 추출된 alginate의 점도변화와 금속이 온 결합능을 측정하였다. $Na_{2}CO_{3}$의 농도가 높을수록 추출시간이 길어질수록 alginate의 겉보기 점도 및 금속이온과의 결합능은 감소하였다. Alginate 의 최대 금속이온 결합능을 나타내는 이온농도는 0.06M, $25m{\ell}$였다. Alginate의 금속이온과의 결합능은 $Pb^{++}$이 가장 높았고, $Cu^{++}$이 가장 낮게 나타났다. Alginate의 점도가 증가할수록 alginate의 금속이온 결합능도 증가되었다.

• 폴리머
• /
• 제26권1호
• /
• pp.105-112
• /
• 2002

연구는 electro-active polymer(EAP)의 특성을 가지는 ion-exchange polymer metal composite(IPMC)을 이용하여 지능형 대장내시경 개발에 목적을 두고 있다. IPMC는 낮은 구동전압과 빠른 반응속도로 인하여 매우 매력적인 물질이다. 본 연구에서는 IPMC구동기의 전극을 무전의 도금 방법을 이용하여 용액함침-환원방법(impregnation-reduction method)으로 제조하였으며 코팅된 백금전극의 횟수에 따라 변위와 변화를 측정하였다. 구동특성을 알아보기 위하여 길이, 주파수에 대한 변위, 힘을 측정하였으며, 주파수 대역은 저주파 대역과 공명주파수 대역을 사용하는 것이 적합하다는 결론을 얻었다. 또한 다양한 구동적 특성과 수분의 함량에 따른 영향에 대해 고전적 적층 이론 (classical laminate theory, CLT)을 이용하여 이방성 IPMC의 응력분포와 수분이동에 따른 모멘트, 변형률, 곡률(cuvature)을 모델링 하였다.

• 한국식품과학회지
• /
• 제9권2호
• /
• pp.157-164
• /
• 1977

본(本) 실험(實驗)은 대두유(大豆油)와 그 튀김면(麵)에, 한국(韓國) 상수도(上水道) 기준(基準) 또는 물리적(物理的)으로 정제(精製)한 지하수(地下水)에 함유가능(含有可能)한양(量)과 동일(同一)한 양(量)의 철(鐵) ion과 동(銅) ion을 각각(各各)에 첨가(添加)하여 그들에 의한 산패촉진정도(酸敗促進程度)를 측정(測定)하고, 아울러 일반적(一般的)으로 널리 쓰이고 있는 유지(油脂)의 황산화제(抗酸化劑)로서 BHA (butylated hydroxyanisole) 또는 citric acid가 이들 금속(金屬)에 의(依)한 산패촉진정도(酸敗促進程度)를 어느 정도 감소(減少)시키는 가를 비교(比較) 검토(檢討)하였다. 본(本) 실험(實驗)의 결과(結果), 대두유(大豆油)와 그 튀김면(麵)의 경우 모두, 철(鐵) ion 또는 동(銅) ion의 첨가(添加)는 이들 ion이 첨가(添加)되지 않은 경우와 비교(比較)할때 뚜렷한 산패촉진효과(酸敗促進?果)를 보였다. 특히, 동(銅) ion이 첨가(添加)된 경우에 있어서는 시간(時間)이 경과(經過)함에 따라 철(鐵)ion이 첨가(添加)된 경우보다 3배(倍) 내지 6배(倍)의 강(强)한 산패촉진효과(酸敗促進?果)를 보였다. 항산화제(抗酸化劑)인 BHA와 citric acid의 이들 금속(金屬)에 의(依)한 산패촉진(酸敗促進)에 대(對)한 저해작용도(沮害作用度)는 citric acid가 첨가(添加)된 경우가 BHA첨가(添加) 경우보다 컸으며, BHA가 첨가(添加)된 경우 그 효과(?果)는 극(極)히 미약(微弱)하였다. 또한 이들 항산화제(抗酸化劑)의 저해작용도(溫害作用度)는 동(銅) ion의 경우보다 철(鐵) ion의 경우에 더 효과적(效果的)인 것으로 보여진다.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.609-609
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• 한국의류학회지
• /
• 제22권6호
• /
• pp.699-705
• /
• 1998

This paper surveys the effect of rice straw ash solution to the physical properties of Sappan Wood dyeing fabrics. In the quantitative analysis of rice straw ash solution, the quantities of absorbed ingredients in fabrics were increased by bath pull treatment but the amount of absorption(K/S value) was increased by bath pH4.5 treatment. This is related to the metal ion. Among the metal ion, effect of Fe iou and Al ion were related. In case added extracted dye solution to mordants, the color dye solution became dark and increased reddish. The changes of mechanical properties of fabrics tensile resilience, bending rigidity(B), compressional resilience(RC) were increased. Generally mechanical properties were increased by rice straw ash solution treatment, specially bath pH9 treatment. Rice straw ash solution treatment of dyeing fabrics made the improvement in tensile strength and elongation and in the amount of absorption, dye ability, color fastness, mechanical properties, tensile strength, elongation.

• 공업화학
• /
• 제4권1호
• /
• pp.171-177
• /
• 1993

원자로 냉각계통의 방사성 오염물질을 제거하기 위한 제염공정에서 유기산에 용해된 금속이온들은 이온교환 수지를 통과하면서 제거된다. 그러나 제염용액내 유기산들은 용액내 금속이온과 착화합물을 형성하여 이온교환수지에 대한 친화도를 감소시킨다. 이같은 관점에서 착화합물 형성이 이온교환공정에 미치는 영향 해석을 위해 코발트와 철 이온을 대상으로 Amberlite IRN-77 양이온수지와의 이온교환실험을 수행하였다. 실험결과에서 화학제염제로 사용된 유기산 가운데 EDTA는 철 이온보다 코발트 이온과 강한 착화합물을 형성하여 코발트 이온의 수지에 대한 이온교환용량을 현저히 감소시켜 주는 성분으로 나타났다. 반면에, Oxalic Acide와 Citric Acide의 영향은 미미하였다. 또한, 실험결과로부터 이들 금속이온 들에 대한 단일 성분계 및 2성분계 비선형 평형식을 결정하였다.