• Resources Recycling
• /
• v.29 no.5
• /
• pp.55-63
• /
• 2020

In order to investigate the separation of Co(II) and Ni(II) by ionic liquids from weak hydrochloric acid solutions, extraction experiments were performed by changing the type and concentration of ionic liquids and the initial pH of the aqueous phase. Two kinds of ionic liquids based on Aliquat 336 were employed in this work; one was synthesized by reacting organophosphorus acids(D2EHPA, PC88A, Cyanex 272, Cyanex 301) with Aliquat 336 and the other was prepared by exchanging the chloride ion of Aliquat 336 with SCN^-. The three types of ionic liquids (ALi-D2, ALi-PC, and ALi-CY272) showed better extraction of Co(II) than Ni(II), and the equilibrium pH was higher than the initial pH. In the case of ALi-CY301, the selectivity of Co(II) and Ni(II) depended on the extraction conditions. In addition, the effect of the addition of TBP to the ionic liquid on the extraction of two metals was also investigated. Employment of ALi-SCN as an extractant resulted in selective extraction of Co(II) and complete separation of the two metal ions was possible.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.178-182
• /
• 1985

The purpose of this study was to develop a separation method of Zn(II), Cu(II) and Mg(II), by ion exchange chromatography using cation exchange resion (Dowex 50w${\times}$8, 80-100 mesh) and anion exchange (Amberlite IRA-400). Ion exchange resions were packed into 25 ${\times}$ 2cm ID column and flow rate was controlled to 0.30 ml/min. Good eluents for separation of nonferrous metal ions such as Zn(II), Cu(II), Mg(II) were as follow: 0.5M $NaNO_3$ (pH 3.1), 0.2~0.5M HCl + 50~60% Acetone, and 1M HAc + 0.1M NaAcf(pH 3.7) aqueous solution. The mixed solution of 0.1M NaAc(pH 3.7), 0.5M HCl + 50% Acetone were found to be the best eluent for step elution. Analysis of metals were determined by atomic absorption spectrophotometer. In addition, separated Zn(II) fraction was obtained by eluted with 0.12N HCl and 1.5N $NH_4OH$ aqueous solution. This solution was titrated by the E. D. T. A.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.51-57
• /
• 1999

Adsorption characteristics of Ni(II), Co(II) and Ag(I) ions on the Amberite IRN 77 cation exchange resin have been studied to suggest the guide-line for the optimum operation of demineralization process in primary coolant system during the shut-down period of pressurized water reactor(PWR). The adsorption mechanism of each metal ion, Ni(II), Co(II) or Ag(I) ion, on a cation exchange resin was well coincided with Langmuir isotherm. The adsorption and treatment capacities of $H^+$-form resin were higher than those of $Li^+$-form resin. In the continuous ion exchange process for the solution of multi-component system, the selectivity of the resin was in increasing order of Ni(II)${\approx}$Co(II)>Ag(I). In addition, the increase of the flow rate decreased the treatment capacity of the resin as well as the slope of the breakthrough curve.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.293-299
• /
• 2014

The bentonite, a buffer material, is essential for the deep geological disposal of HLW (high-level radioactive waste), and it is important to know its characteristic long-term evolution in the underground environment. With an assumption that the concentration of aqueous copper ions will increase if copper-coated materials on a metal canister are corroded, we examined some characteristic ion-exchanges and cation release phenomena occurring in the bentonite clay (montmorillonite) interacted with aqueous Cu cations. During the interaction between dissolved copper and bentonite, Na rather than Ca cations in the expandable clay were preferentially replaced by Cu ions in the experiment. In addition, the Cu-exchanged montmorillonite was characterized by an asymmetric X-ray diffracted pattern with relatively collapsed interlayers compared to the raw sample. These results indicate that the gradual change of the original bentonite property may occur in a underground disposal condition. We are going to further study the characteristic chemical and mineralogical changes of the bentonite buffer to be used for the disposal site by conducting additional experiments.

• Journal of Powder Materials
• /
• v.30 no.6
• /
• pp.516-520
• /
• 2023

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO₄ is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO₄O has two redox reactions (V⁵⁺/V⁴⁺/V³⁺) but low electrochemical activity. In this study, LiVPO₄O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO₄O_1-xF_x, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

• Preventive Nutrition and Food Science
• /
• v.7 no.4
• /
• pp.417-420
• /
• 2002

A strong fibrin-specific fibrinolytic enzyme was produced from Bacillus subtilis KH-4 isolated from Deonjang, a Korean fermented soybean paste similar to Japanese miso. The addition of glucose as a carbon source resulted in the highest levels of caseinolytic and fibrinolytic activities. Likewise, the addition of yeast extract as the nitrogen source resulted in the highest caseinolytic and fibrinolytic activities (3473.2 unit and 47.4 munit, respectively), It was observed that out of all metal ion sources only calcium (chloride) enhanced caseinolytic and fibrinolytic activities, with increases of 4949.3 unit and 58.2 unit/mg, respectively. The optimal temperature for the production of the enzyme was found to be 4$0^{\circ}C$ in the optimal medium (glucose 20 g, yeast extract 5 g, CaCl$_2$l g, and NaCl 2 g). The maximum fibrinolytic activity was observed at the late stationary phase. B. subtilis KH-4 produced a fibrinolytic enzyme at 4$0^{\circ}C$, after 30 h growth, which increased up to 54 h and then remained constant. These results suggest that Deonjang has potential as a source of physiologically active anti-thromotic enzymes.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.682-688
• /
• 2009

Changes in lipophillic pigments concentration and its relation to color of fresh green tea liquor during heat treatment were studied. The results showed liquor greenness decreased markedly with extension of incubation time at $55^{\circ}C$, while the brightness and yellowness changed a little. Significant increase in 'a' and 'b' values of tea liquor was observed at $95^{\circ}C$. Color change of liquor at $55^{\circ}C$ was accompanied by a decrease in the level of chlorophylls, lutein and neoxanthin, and an increase in the pheophytins and ${\beta}-carotene$ levels. However, all pigments except ${\beta}-carotene$ decreased with time extension at $95^{\circ}C$. Significant correlation was found between pigments and color difference index. The browning of fresh green tea liquor was attributed to vicissitudes of lipophillic pigments during heat treatment, especially to the change of chlorophylls/pheophytins ratio. Result also showed addition of $Zn^{2+}$ at 1.6 ${\mu}mol/L$ could partially alleviate the decrease in greenness during heat treatment.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.1
• /
• pp.85-90
• /
• 1999

The characcteristics of anthocyanin pigments from crab apple (Malus prunifolia Wild. Borkh. "red fruit") by ethanol extract were investigated at various condition of light temperature sugar, organic acid me-tal ion and pH. The pigments were stable(over the 60%) on the light irradiation throughout 20 days sto-rage period at room temperature and in the pesenc of Al-foil red blue green and yellow cover were rage period at room temperature and in the pesence of Al-foil red blue green and yellow cover were very stable. The pigments also showed high thermal stbility(over the 67% at 115$^{\circ}C$ 10min) at pH2.5 respectively. The pigments with added organic acid greatly increased thickness of red color. The pig-ments with added metal ions at pH 2.5 such as Na+ K+, Mg2+ Ca2+ and Mn2+ were stable throughout 20 days storage period at $25^{\circ}C$. But Cu2+ addition showed the rapidly degradation of the pigments and Al3+ addition induced the color conversion from red to redish violet. The thickness of the red color of anthocyanin pigments increased increased as the pH decreased. These results indicated that crab apple antho-cyanin pigments might be potental source of natural food colorant. colorant.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.313-313
• /
• 2013

For high-performance TFT (Thin film transistor), poly-crystalline semiconductor thin film with low resistivity and high hall carrier mobility is necessary. But, conventional SPC (Solid phase crystallization) process has disadvantages in fabrication such as long annealing time in high temperature or using very expensive Excimer laser. On the contrary, MIC (Metal-induced crystallization) process enables semiconductor thin film crystallization at lower temperature in short annealing time. But, it has been known that the poly-crystalline semiconductor thin film fabricated by MIC methods, has low hall mobility due to the residual metals after crystallization process. In this study, Ni metal was shallow implanted using PIII&D (Plasma Immersion Ion Implantation & Deposition) technique instead of depositing Ni layer to reduce the Ni contamination after annealing. In addition, the effect of external magnetic field during annealing was studied to enhance the amorphous silicon thin film crystallization process. Various thin film analytical techniques such as XRD (X-Ray Diffraction), Raman spectroscopy, and XPS (X-ray Photoelectron Spectroscopy), Hall mobility measurement system were used to investigate the structure and composition of silicon thin film samples.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3223-3228
• /
• 2011

To quantify the presence of mercuric ions in aqueous solution, double-stranded DNA (dsDNA) of poly(dT) was employed using a light switch compound, $Ru(phen)_2(dppz)^{2+}$ (1) which is reported to intercalate into dsDNA of a right-handed B-form. Addition of mercuric ions induced the dehybridization of poly(dT)${\cdot}$poly(dA) duplexes to form a hairpin structure of poly(dT) at room temperature and the metal-to-ligand charge transfer emission derived from the intercalation of 1 was reduced due to the dehybridization of dsDNA. As the concentration of $Hg^{2+}$ was increased, the emission of 1 progressively decreased. This label-free emission method had a detection limit of 0.2 nM. Other metal ions, such as $K^+$, $Ag^+$, $Ca^{2+}$, $Mg^{2+}$, $Zn^{2+}$, $Mn^{2+}$, $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$, $Cd^{2+}$, $Cr^{3+}$, $Fe^{3+}$, had no significant effect on reducing emission. This emission method can differentiate matched and mismatched poly(dT) sequences based on the emission intensity of dsDNA.