• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.53-59
• /
• 2000

Based on the polarization selectivity of fiber-to-planar waveguide coupler, a novel fiber optic polarizer has been designed and fabricated. The large structural birefringence of a metal-clad planar waveguide enables the polarizer to have wide operating wavelength range. The polymer and gold were used for the guiding layer and cladding layer of the planar waveguide, respectively. The experimental results showed that either TE or TM polarized lightwave could be created by adjusting the thickness of planar waveguide. Operating wavelegth range satisfying more than 16㏈ polarization extinction ratio was 130nm. The average insertion loss of fabricated devices was order of 0.5㏈.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.355-361
• /
• 2005

The objective of this paper is to compare the surface features of two kinds of activated caron fiber (ACF) treated with potassium and the variation of their properties by phosphoric acid pre-treatment. X-ray diffraction (XRD) patterns indicate that activated carbon fiber containing potassium species show better performance for metal and metal salts by pre-treatment with phosphoric acid. In order to present the causes of the differences in surface properties and specific surface area after the samples were treated with phosphoric acid, pore structure and surface morphology were investigated by adsorption analysis and SEM. For the chemical composition microanalysis for potassium leading of the activated carbon fibers pre-treated with phosphoric acid, samples were analyzed by EDX. Finally, the type and quality of oxygen groups were determined from the method proposed by Boehm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1315-1320
• /
• 2005

TiNi alloy fiber was used to recover the original shape of materials using its shape memory effect. The shape memory alloy plays an important role within the metal matrix composite. The shape memory alloy can control the crack propagation in metal matrix composite, and improve the tensile strength of the composite. In this study, TiNi/A16061 shape memory alloy(SMA) composite was fabricated by hot press method, and pressed by a roller for its strength improvement. The four kinds of specimens were fabricated with $0\%,\;3.2\%,\;5.2\%\;and\;7\%$ and volume fraction of TiNi alloy fiber, respectively. A fatigue test has performed to evaluate the crack initiation and propagation for the TiNi/A16061 SMA composite fabricated by かis method. In order to study the shape memory effect of the TiNi alloy fiber, the test has also done under both conditions of the room temperature and high temperature. The relationship between the crack growth rate and the stress intensity factor was clarified for the composite, and the cold rolling effect was also studied.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.28-31
• /
• 2018

In this paper, we have proposed and demonstrated a variable optical attenuator (VOA) incorporating a dual-fiber collimator and a bimetallic actuator. The optical attenuation between input and output single-mode fibers was tuned by tilting the angle of a reflection mirror fixed on the bimetal. The bimetal was heated or cooled by a thermoelectric cooler (TEC) and then moved the reflection mirror, due to bending and unreeling. The desired optical attenuation can be obtained through adjusting the electrical input into the TEC. The fabricated device showed 0.5 dB of insertion loss, 0.2 dB of maximum polarization-dependent loss, and 40 dB of dynamic range. The response time was measured to be about 5 s.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1801-1804
• /
• 1991

Described is a new type of control signal transmission system in which an optical fiber is used in place of metal wire cables. This optical transmission system is reliable against EMI and also eliminates the frequency band limitation on the metal wire cables. Since the Z80 CPU is used to distribute the instructions, many tasks can be carried out very easily, and many errors can be avoided. Although an experiment was carried out for 4 bit binary data, the number of bits can be increased to 6 or more without any degradation in reliability. Thus, a variety of applications can be expected to be actualized with this control signal transmission system.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.195-198
• /
• 2002

Poly(crown ether)s as a functional polymer materials have powerful and selective complexation properties with a large number of metal cations and have advantage of facility of their recovery and modification of their complexation properties in contrast to their monomeric analogues. Poly(crown ether)s having pendant macrocyclic groups can easily form 2:1-type crown ether ring-to-cation complexes with particular metal ions which are a little larger than the cavity of the crown ether ring. (omitted)

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.152-160
• /
• 1993

This paper presents experimental study of the static and dynamic fracture toughness behavior of a A1-6061 aluminum alloy reinforced alumina( .delta. -A1$_{2}$0$_{3}$) whiskers with 5%, 10%, 15% volume fraction. The static fracture tests using three-point bending specimen were performed by UTM25T. And drop weight impact tester performing dynamic fracture tests was used to measure dynamic locads applied to a fatigue-precracked specimes. The oneset of crack initiation was detected uwing a strain gage bonded near a crack tip. The value of static fracture toughness $K_{IC}$ and dynamic fracture toughness $K_{ID}$ were decided on the basis of linear elastic fracture mechanics. The effects of fiber volume fraction and loading on fracture toughness were investigated. The distribution of whiskers, bonding state and fracture interfaces involved in void, fiber pull-out state were investigated by optical microscopy(OM) and scanning electron microscopy(SEM)

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.237-237
• /
• 2006

P(VDF/TrFE(72/28) ultrathin films were used in the fabrication of Metal-Ferroelectric polymer-Metal (MFM) single bit device with special emphasis on uniform film surface, faster dipole switching time under applied external field and longer memory retention time. AFM and FTIR-GIRAS were complementary in analyzing surface crystalline morphology and the resultant change in chain orientation with varying thermal history. DC-EFM technique was used to 'write-read-erase' the data on the memory bit in a much faster time than P-E studies. The results obtained from this study will enable us to have a good understanding of the ferroelectric and piezoelectric behavior of P(VDF/TrFE)(72/28) thin films suitable for high density data storage applications.

• Carbon letters
• /
• v.9 no.2
• /
• pp.105-107
• /
• 2008

In this work, we employed an electroless nickel plating on glass fibers in order to enhance the electric conductivity of fibers. And the effects of metal content and plating time on the conductivity of fibers were investigated. From the results, island-like metal clusters were found on the fiber surfaces in initial plating state, and perfect metallic layers were observed after 10 min of plating time. The thickness of metallic layers on fiber surfaces was proportion to plating time, and the electric conductivity showed similar trends. The nickel cluster sizes on fibers decreased with increasing plating time, indicating that surface energetics of the fibers could become more homogeneous and make well-packed metallic layers, resulting in the high conductivity of Ni/glass fibers.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.514-519
• /
• 2000

Predicting a pressure drop between inlet and outlet of the filter system is essential in designing the optimum filter system. This experiment has been carried out to investigate several design parameters which influence in a pressure drop, such as different tube length and metal fiber filter mesh size. A 1/50 scale filter system was made to simulate a real filter system. Results are compared with Darcy equation for a porous media.