• Journal of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.257-264
• /
• 1985

Dioxobis(3-methoxysalicyaldehydato)molybdeum(VI) complex has been synthesized by reactions of 3-methoxysalicylaldehyde and ammonium paramolybdate in methanol solution. With appropriate primary amine, the resulting complex gave schiff-base complexes, MoO$_2$(CH$_3$O-sal-N-R)$_2$ in which C=O oxide ligands had been replaced by nitrogen. The properties and possible molecular structure of these complexes were discussed by elemental analysis, spectroscopic studies and electric conductivities measurements. It was found that the Mo(VI) complexes contain a cis-MoO$_2$ group since their infrared spectra two Mo=O band at about 900cm$^{-1}$ and the combining ratios for MoO$_2$-ligand are 1 : 2. Also, electronic spectra of molybdenyl complexes assigned to ligand-to-metal charge transfer transition. All of these complexes are yellow or orange, depolar compound and slightly soluble in alcohol, dichloromethane, chloroform and N,N-dimethylformamide.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1809-1814
• /
• 2006

The L-Valinate anion coordinating zinc complex, [$Zn(val)_2(H-2O)$], was isolated and structurally characterized by single crystal X-ray crystallography. The crystal possess orthorhombic symmetry with a space group $P2_12_12_1$, Z = 4, and a = 7.4279(2)$\AA$, b = 9.4342(2)$\AA$, c =20.5862(7)$\AA$ respectively. The compound features a penta-coordinate zinc ion in which the two valine anion molecules are directly coordinating the central zinc metal ion via their N (amine) and O (carboxylate) atoms, and an additional coordination to zinc is made by water molecule (solvent) to form a distorted square pyramidal structure. In addition, further synthesis of the valine capped ZnS:Mn nanocrystal from the reaction of [$Zn(val)_2(H-2O)$] precursor with $Na_2S$ and 1.95 weight % of $Mn^{2+}$ dopant is described. Obtained valine capped nanocrystal was water dispersible and was optically characterized by UV-vis and solution PL spectroscopy. The solution PL spectrum for the valine capped ZnS:Mn nanocrystal showed an excitation peak at 280 nm and a very narrow emission peak at 558 nm respectively. The measured and calculated PL efficiency of the nanocrystal in water was 15.8%. The obtained powders were characterized by XRD, HR-TEM, and EDXS analyses. The particle size of the nanocrystal was also measured via a TEM image. The measured average particle size was 3.3 nm.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.1
• /
• pp.58-63
• /
• 2020

THPP is a type of metallic complex explosive used in initiators, consisting of TiH₂ and KClO₄. In this case KClO₄ includes ClO₄^- which is a harmful substance that may cause thyroid dysfunction or tumors. In this study KIO₄ is applied to a new type of environmentally friendly explosive as a substitute to the conventional KClO₄. Tests were carried out to see if KIO₄ can be made a successful replacement for KClO₄.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.672-681
• /
• 2009

The aim of this study was to evaluate the antioxidant activities of enzymatic digests from citrus by-products (CBPs) prepared by high speed drying (HSD). HSD needs a short time (60 min) for drying and can be used in a commercial scale. Enzymatic digests were prepared from the CBPs using 6 enzymes such as aminoglucosidase (AMG), celluclast, pectinex, termamyl, ultraflo, and viscozyme. Antioxidant activities of AMG digest from CBPs were evaluated by different in vitro models such as 1,1-diphenyl-2-picrylhydrazyl (DPPH), hydroxyl, alkyl, $H_2O_2$ scavenging, metal chelating, lipid peroxidation, and comet assays, and exhibited strong activities. The antioxidant compounds were detected by an high performance liquid chromatography (HPLC) coupled on-line to an 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid ($ABTS^+$) scavenging detection system, and found that hesperidin was the key compound. Therefore, the results obtained in this study suggest that HSD is an effective method to transform wet CBPs into dried form, and CBPs are potential source of natural antioxidant.

• Journal of Fashion Business
• /
• v.22 no.1
• /
• pp.100-113
• /
• 2018

From the late 17th to the early 18th century, Europeans were strongly intrigued by products from the East. Therefore, several countries like England, France, and Netherlands formed the 'East India Company' to pursue trade. First, European markets rapidly responded to this desire for exoticism by importing goods; then, they produced imitation Oriental goods. Finally, they made stylistically advanced exotic merchandise from the perspectives of European. In terms of the textile industry, this trend was expressed in the pattern design of silk, or the so called 'bizarre silk.' In this paper, bizarre silk patterns were scrutinized based on a digital archive of museums, catalogues of museums, portal sites, and the literature. The bizarre silk patterns were analyzed then classified into six categories: pseudo-Oriental plant pattern, pattern mingled with architectural motifs, pattern of juxtaposed with Oriental goods, abstract pattern, exuberant pattern with metal threads, and semi-naturalistic pattern. These patterns were characterized according to the following features: strangely large exotic floral patterns were undulating and asymmetrical; exotic foliage and flowers were sometimes mixed with architectural motifs or Oriental goods to easily show the Oriental influence; motifs of bizarre silk patterns were abstractly stylized; bizarre silk patterns became luxurious once more like the Baroque period; finally, floral patterns became more natural, and still exotic motifs remained in the background to maintain the bizarre silk features. These bizarre silk patterns evolved from the viewpoints of Europeans through acceptance stage, compound stage, and confluent stage.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.386-390
• /
• 2015

Fe-base superalloy powders with $Y_2O_3$ dispersion were prepared by high energy ball milling, followed by spark plasma sintering for consolidation. High-purity elemental powders with different Fe powder sizes of 24 and 50 mm were used for the preparation of $Fe-20Cr-4.5Al-0.5Ti-O.5Y_2O_3$ powder mixtures (wt%). The milling process of the powders was carried out in a horizontal rotary ball mill using a stainless steel vial and balls. The milling times of 1 to 5 h by constant operation (350 rpm, ball-to-powder ratio of 30:1 in weight) or cycle operation (1300 rpm for 4 min and 900 rpm for 1 min, 15:1) were applied. Microstructural observation revealed that the crystalline size of Fe decreased with an increase in milling time by cyclic operation and was about 15 nm after 3 h, forming a FeCr alloy phase. The cyclic operation had an advantage over constant milling in that a smaller-agglomerated structure was obtained. The milled powders were sintered at $1100^{\circ}C$ for 30 min in vacuum. With an increase in milling time, the sintered specimen showed a more homogeneous microstructure. In addition, a homogenous distribution of Y-compound particles in the grain boundary was confirmed by EDX analysis.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.525-532
• /
• 1992

Fluorine-doped YBaS12TCuS13TOS17-xTFS1yT superconducting materials with y varing two orders of magnitude form 0.02 to 2.0 have been prepared by a sol-gel process by using metal nitrate salts, sodium hydroxide and sodium fluoride. Fluorine contents have been measured using an ion-selective electrode. All fluorine doped as reactant were found to be present in the resulted samples. From the observation of XRD it has been concluded that the samples with y 0.2 formed simply the single phase of perovskite structure, whereas those with y 0.5 yielded together some compounds such as BaFS12T, YFS13T and CuO in the resulted samples. The observation of solid state S019TF NMR has been carried out in order to check whether fluorine was actually incorporated into the lattice sites, and the experimental results revealed that the mole ratio of fluorine incorporated into the lattice sites of YBaS12TCuS13TOS17-xT was approximately 0.2 per mole of the compound. Also electrical resistivity measurement indicated that onset transition temperature has the tendency to increase slightly with increasing y in the dilute region as y 0.2.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.51-52
• /
• 2007

Built-in voltage in organic light-emitting diodes was studied using modulated photocurrent technique ambient conditions. From the bias voltage-dependent photocurrent, built-in voltage of the device is determined. The applied bias voltage when the magnitude of modulated photo current is zero corresponds to a built-in voltage. Built-in voltage in the device is generated due to a difference of work function of the anode and cathode. A device was made with a structure of anode/$Alq_3$/cathode to study a built-in voltage. ITO and ITO/PEDOT:PSS were used as an anode, and Al and LiF/AI were used as a cathode. It was found that an incorporation of PEDOT:PSS layer between the ITO and $Alq_3$ increases a built-in voltage by about 0.4V. This is consistent to a difference of a highest occupied energy states of ITO and PEDOT:PSS. This implies that a use of PEDOT:PSS layer in anode improves the efficiency of the device because of a lowering of anode barrier height. With a use bilayer cathode system LiF/Al, it was found that the built-in voltage increases as the LiF layer thickness increases in the thickness range of 0~1nm. For 1nm thick LiF layer, there is a lowering of electron barrier by about 0.2eV with respect to an Al-only device. It indicates that a very thin alkaline metal compound LiF lowers an electron barrier height.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.817-823
• /
• 2011

Angelicae gigas Nakai has been used as a traditional medicine as well as an edible vegetable in South Korea. In this study, the total phenolic and flavonoid content and antioxidants of A. gigas Nakai leaves were examined in vitro via hydroxyl-radical-scavenging activity, reducing power activity, metal chelating assay, and DPPH-free -radical-scavenging assay. Among all the extracts from A. gigas Nakai leaves, the ethanol extract showed the strongest effects in all of the assays. The $EC_{50}$ values for the DPPH-radical-scavenging activities of ethanol, methanol, and water extracts were 31.47, 42.14, and $58.47{\mu}g/mL$, respectively. Among the extracts from A. gigas Kakai leaves, the ethanol extract had the highest levels of total phenolics ($7.84{\pm}1.46$ mg TAN/g) and total flavonoids ($4.23{\pm}0.03$ mg QE/g), which correlated strongly with the individual phenolic-compound (p-hydroxybenzoic acid, vanillin, and trans-ferulic acid) contents. The ethanol extract also showed stronger antioxidant activity than tocopherol in hydroxyl- radical-scavenging activity assay. These results indicate that the ethanol extract of A. gigas Kakai leaves possesses significant antioxidant properties, which suggests its great potential as a functional-food ingredient in the food industry.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.319-326
• /
• 2020

BACKGROUND: Measurement equipment was developed for inorganic nutrient concentration inside the hydroponic culture medium with several macro- and micro compositions, and applied for measuring the compositions of conventional medium. METHODS AND RESULTS: Before the equipment development, sonicator and heater were utilized to control temperature around of the module mixing with color reagents and target samples among the inorganic compositions. The measurement module and multi-sampler were also manufactured based on the COMS (Complementary Metal-Oxide Semiconductor) and installed inside the measurement equipment. Concentration of standard solution, value measured by the equipment, standard deviation or measured average value were used for estimating the accuracy and average recall of the equipment. Yamazaki solutions with EC of 0.5, 1.5, and 2.5 dS/m were offered to confirm the equipment accuracy and standard error. CONCLUSION: It was suggested that the developed equipment could be automatically applied for measurement with accuracy of over 96% and standard errors of less than 5% on 12 macro- and micro compositions such as a NO3-N, PO43- or Fe.