• 산업보건소식
• /
• 제47호
• /
• pp.4-14
• /
• 1987

The authors investigated estimated amounts of salt intake of workers in manufacturing industries who consisted of 1,506 males in 6 manufacturing fields and 476 females in 3 fields in Pusan area using filter paper method which was developed recently. The obtained results were as follows; 1. Mean excretion amounts of urinary electrolytes were Na 200.7 mEq/l, K 44.2 mEq/l and Cr 1.12g/l in male and Na 190.2 mEq/l, K 44.0 mEq/l and Cr 1.10g/1 in female. 2. Mean daily salt intake amounts were 19.4g in male and l5.3g in female. 3. By the fields of manufacturing industries in male, workers in metal product field had the highest salt intake as 20.0g, and the following were workers in food and tobacco field as 19.7g, workers in textile, wearing apparel and leather field as 19.6g in order. 4. In female, workers in textile, wearing apparel and leather field had the highest salt intake as l5.7g and the next were workers in chemical, coal and rubber products field as l5.0g and workers in fabricated metal products, machinery and equipments as l4.3g, respectively.

• 한국산업보건학회지
• /
• 제11권3호
• /
• pp.179-189
• /
• 2001

This study was performed to identify the current status of work environment management and to provide appropriate recommendations for small scale industry with less than 5 workers from September, 2000 to October, 2000 in Seoul city and Gyoung-gi province. The 211 companies were surveyed by checklist included the elements of management of work environment, hazardous chemicals, MSDS, personal protective equipment, and ventilation system. The proportion of metal products manufacturing and printing industries are 25.6 % and 22.3%, respectively. The daily working hours in printing industry is longer than others. The industries that produce potentially hazardous agents, such as noise, dust, metal, organic solvents, radiation and chemical material are pulp, plating, machinery, and printing, respectively. In above industries, only 2.8 % of those recognised and had MSDS. The proportion of companies providing fire extinguishers, safety showers are found to be 13.3 %, 7.1 %, respectively. Only 24.2 % of companies provided personal protective equipment to the workers. The ventilation system was operated in most of companies. But local exhaust ventilation system is provided to 22.3 % of those, also had not been annually inspected. This study showed that the current status of occupational safety and health was not appropriate for workers in small scale industries. It is suggested that annual physical examination have to be performed, MSDS usage must become widespread, and employer and emplyees in small scale industry should be educated for the treatment and storage of hazardous chemicals to improve the occupational safety and health of the working environment. also, regulatory standard has to be applied to local exhaust ventilation system in small scale industry to improve the working condition.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.218-222
• /
• 2014

In this paper, we introduce an autonomous calibration method for a 2D laser displacement sensor (e.g. laser vision sensor and laser range finder) by matching a single point on a flat structure. Many arc welding robots install a 2D laser displacement sensor to expand their application by recognizing their environment (e.g. base metal and seam). In such systems, sensing data should be transformed to the robot's coordinates, and the geometric relation (i.e. rotation and translation) between the robot's coordinates and sensor coordinates should be known for the transformation. Calibration means the inference process of geometric relation between the sensor and robot. Generally, the matching of more than 3 points is required to infer the geometric relation. However, we introduce a novel method to calibrate using only 1 point matching and use a specific flat structure (i.e. circular hole) which enables us to find the geometric relation with a single point matching. We make the rotation component of the calibration results as a constant to use only a single point by moving a robot to a specific pose. The flat structure can be installed easily in a manufacturing site, because the structure does not have a volume (i.e. almost 2D structure). The calibration process is fully autonomous and does not need any manual operation. A robot which installed the sensor moves to the specific pose by sensing features of the circular hole such as length of chord and center position of the chord. We show the precision of the proposed method by performing repetitive experiments in various situations. Furthermore, we applied the result of the proposed method to sensor based seam tracking with a robot, and report the difference of the robot's TCP (Tool Center Point) trajectory. This experiment shows that the proposed method ensures precision.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.235-240
• /
• 2014

The basis of the cobalt demand analysis by use was established via the investigation and analysis of the cobalt materials flow, and the overall cobalt metal material and parts industry structure in Korea was examined to determine the cobalt material flow. The markets of the cobalt material for machinery were studied, including their interrelations, via market and study trends, and relevant plans were examined. The results of the study indicated that the advanced core technology for advanced industry and technology-intensive industry development is required to structurally innovate the parts materials and basic materials industries and to upgrade the catch-up industry structure to the new frontier structure.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.156-162
• /
• 2019

Electroless Ni-P coatings are widely used in the chemical, mechanical, and electronic industries because of their excellent wear and abrasion resistance. In this study, The influence of pH values on properties of Ni-P-PTFE composite coatings was investigated. To improve mold lubrication, Ni-P-PTFE composite coatings at different pH value were studied. The morphology and phase structure of Ni-P-PTFE composite coatings were analyzed by scanning electron microscopy(SEM) and X-ray diffractometry(XRD). The result showed that Ni-P-PTFE composite coating is composed of Ni, P and PTFE. It exhibits an amorphous structure and good Corrosion Resistance to the substrate. Ni-P-PTFE composite coatings have higher open circuit potential than that of the substrate, which obtained at pH value of 5.0 optimal integrated properties.

• 한국콘텐츠학회논문지
• /
• 제17권3호
• /
• pp.666-674
• /
• 2017

오늘날 기술융합과 산업융합과 같은 융합이라는 용어는 우리사회에서 중요한 화두중의 하나로 떠오르고 있다. 그러나 이를 체계적으로 정량적인 지표로 측정하려는 시도는 많이 부족한 실정이다. 이에 본 연구에서는 특허자료를 이용하여 산업별융합계수를 측정하고, 융합계수에 기반 하여 어떠한 산업에서 융합이 심화되고 있는지를 분석하는 것을 그 목적으로 한다. 이를 위해 먼저 2011년부터 2015년까지 한국특허청에 출원된 국내특허를 대상으로 하여 산업별융합계수를 측정하였다. 연구결과 연구기간동안 특허가 가장 많이 출원된 산업은 사무용기기 및 컴퓨터제조업, 전기제품제조업, 신호전송 및 통신업 등의 범 ICT산업군 이었으며, 동기간 전체산업의 융합계수는 0.316(239,664/758,446)로 나타났다. 또한 산업융합계수가 가장 높은 산업 순으로는 인조섬유(0.918), 도장(0.597), 석유제품(0.588), 기타화합물(0.567), 섬유제품(0.555), 기타운송장비(0.549), 생산관리(0.532) 등으로 나타났다. 추가로 특허출원건수가 많은 산업중심으로 같은 분석을 실시한 결과 광학기기제조업, 기초화합물제조업, 조립금속산업, 정밀/측정기기제조업, 특수목적용기계제조업분야에서 융합이 활발하게 이루어지고 있으며, 이들 산업들은 주로 사무용기기 및 컴퓨터제조업, 특수목적용기계제조업, 정밀/측정기기제조업과 서로 융합이 이루어지고 있는 것으로 나타나고 있다.

• 산업경영시스템학회지
• /
• 제24권64호
• /
• pp.77-83
• /
• 2001

In this paper, we investigated the relationship between the variables related to manufacturing environment and industrial accident. Also we wish to analyze how much these variables influence in production result of company: the manufacturing performances such as production quantity, quality, cost and delivery. For this investigation, we collected the real data from 16 small/medium-sized manufacturing companies by performing a questionnaire survey and one-site interview with the workers. Sixteen companies were made up of the following four industries: metal processing, machinery manufacturing, chemical products manufacturing and electronic products manufacturing, The data analysis was made using SPSS PC+. Based on the result of the analysis, we came to the conclusion that most of variables related to manufacturing environment and industrial safety were connecting with industrial accident occurrence and also influenced in manufacturing performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.426-435
• /
• 2005

The lightness of components required in automobile and machinery industries is requiring high strength of components. Therefore this requirement is accomplished as the process of shot-peening method that the compressive residual stress is made on the metal surface as one of various improvement methods. Special research is, therefore, needed about compressive residual stress on the metal surface in the process of shot-peening method. Therefore, in this paper the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in environmental condition(temperature) and mechanical condition(shot velocity, stress ratio) was investigated with considering fracture mechanics. By using the methods mentioned above, the following conclusions have been drawn. (1) The fatigue crack growth rate(da/dN) of the shot-peened material was lower than that of the un-peened one. In high temperature range. fatigue crack growth rate decreased with increasing temperature range, while fatigue crack growth rate increased by decreasing temperature in low temperature. (2) Fatigue life shows more improvement in the shot-peened material than in the un-peened material. And compressive residual stress of surface on the shot-peen processed operate resistance force of fatigue crack propagation.

• 한국지역지리학회지
• /
• 제6권3호
• /
• pp.169-184
• /
• 2000

미국의 씬씨내티 대도시지역을 대상으로 인자분석 및 Hot Spot 분석에 의해 산업 군집과 그것의 경계가 확인되어졌다. 전통적 투입 산출 접근법이 비공간적 산업 군집을 추출하는 반면 이 연구는 전통적 접근을 GIS 기법과 결합하여 경계를 설정한다. 투입 산출 산업 군집의 결과를 선도산업 부문과 결합하여 5개 선도 산업 군집을 추출하였는데 그것은 음식료품, 화학, 금속, 금속제품, 기계공업 부분이다. 그리고 Hot Spot 기법을 이용하여 연구지역의 산업 군집을 Arcview에 통합하여 시각화하였다. 산업 군집의 공간적 결합정도와 공간적 한계를 결정하는 것은 경제의 공간구조의 효율성을 측정하는 부가적 접근이 될 수 있다. 산업 군집과 산업의 공간적 군집 접근은 하나의 공장이나 기업의 수준보다 집계적인 차원에서 산업의 공간적 배열의 새로운 모형 개발 기초의 가능성을 제시한다.

• 한국경제지리학회지
• /
• 제9권3호
• /
• pp.297-317
• /
• 2006

이 글은 동남권 지역에 형성된 광역적 산업클러스터를 확인하고 그것을 효과적으로 지원하기 위한 방안을 모색하는 데 목적이 있다. 이를 위해 산업클러스터의 광역화와 광역적 거버넌스에 관한 이론 및 선행연구들을 검토하고, 동남권의 기계 금속산업클러스터 형성실태를 분석하였다. 동남권의 산업도시들은 1970년대 후반에 이미 회랑형의 기계 금속산업벨트를 구축하였고 오늘날에는 십여 개의 산업도시들이 긴밀히 연계된 대규모 기계 금속산업클러스터를 형성하고 있다. 동남권 지역에 있어서 산업도시의 연계는 점차 규모가 확대되고 있을 뿐 아니라 제철, 조선, 자동차, 플랜트 분야 등에서 경쟁력이 높아지고 있다. 그리고 지리적 범위도 대구 경북 지역으로 확대되어 이제 그 형태가 목걸이형 혹은 수차(물레방아)형을 갖게 되었다. 그것은 행정구역상으로는 부산, 울산, 경남, 대구, 경북, 전남 일부를 포함하는 것이다. 그리고 이러한 분석에 기반하여, 동남권의 광역적 기계 금속산업클러스터의 산업경쟁력을 강화할 수 있는 정책방안과 거버넌스체계를 모색하였다. 동남권에서 근래에 대두하고 있는 문제는 산업적 연계망의 공간적 범위와 행정구역 간의 불일치이다. 산업클러스터의 광역화에 따라서 이를 효율적으로 지원하는 행정지원체계를 구축하기 위한 현실적인 방안들을 검토하였다.