• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.509-516
• /
• 2018

TCP is a well-known communication protocol which is widely used for reliable message transmissions. The urgent mechanism of TCP plays a key role to transmit messages with a high priority. If a high priority message occurs at the transmitting node, the urgent mechanism informs the receiving node about the presence of a high priority message prior to its transmission so that the receiving node can be prepared for handling this message in advance. This implies that the existing urgent mechanism of TCP does not guarantee an immediate or faster delivery of the high priority message itself. Therefore, the ability of priority-based transmission is required on TCP not only to ensure reliable transmissions of normal messages but also to offer a differentiated service according to the priority of message. This paper presents a priority-based transmission algorithm over TCP using a priority queue in a multi-threaded environment. The effectiveness of the proposed algorithm is explored using an experimental setup in which various messages with different priority levels are transmitted.

• Journal of Information Processing Systems
• /
• v.11 no.3
• /
• pp.465-482
• /
• 2015

IEEE 802.11p is a standard MAC protocol for wireless access in vehicular environments (WAVEs). If a packet collision happens when a safety message is sent out, IEEE 802.11p chooses a random back-off counter value in a fixed-size contention window. However, depending on the random choice of back-off counter value, it is still possible that less important messages are sent out first while more important messages are delayed longer until sent out. In this paper, we present a new scheme for safety message scheduling, called the enhanced message priority mechanism (EMPM). It consists of the following two components: the benefit-value algorithm, which calculates the priority of the messages depending on the speed, deceleration, and message lifetime; and the back-off counter selection algorithm, which chooses the non-uniform back-off counter value in order to reduce the collision probability and to enhance the throughput of the highly beneficial messages. Numerical results show that the EMPM can significantly improve the throughput and delay of messages with high benefits when compared with existing MAC protocols. Consequently, the EMPM can provide better QoS support for the more important and urgent messages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.369-373
• /
• 1989

This paper investigates average access times on eight asynchronous priority levels of FDDI MAC protocol with parameters on offered loads, message sizes, and number of stations. In case of parameter with offered loads, higher priority levels exhibit similar variances and in case of parameter with message sizes and number of satations, higher priority levels exhibit almost invariables but as increase of message sizes, increase only a small amount of access time on the other hand, as number of stations increase, average access times decrease little by little. But in case of lowest priority level. average access times decrease little by little. But in case of lowest priority level, average access times exhibit relatively large variances about above three parameters.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.83-91
• /
• 2011

The objective of VMS(Variable Message Sign) is to provide the traffic information downstream to drivers upstream so that they can choose their routes or expect the travel time to arrive the destination. Because there is not enough time and space to show the message, VMS message should be selected carefully. However, the message of VMS has been simply selected among the pre-designed message sets based on the priority rule of events. If the traffic demand between origin and destination is identified along the freeway, message can be selected to provide the information of a route that more drivers will use. In this study, a time sliced OD(Origin/Destination) estimation method will be developed using the detector information of the on-ramp, exit ramp, and the main lanes. And the strategy of a priority rule of message was planned.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1320-1326
• /
• 2017

Recently, IoT has been studying a lightweight protocol to satisfy device communication in a limited network environment. MQTT is a typical lightweight protocol. It supports small fixed headers to minimize overhead, and adopts publish/subscribe structure to guarantee real-time performance. However, MQTT does not support prioritization of important data and can not provide QoS in a specific IoT service. In this paper, we propose a message processing method to consider the priority of various IoT services in MQTT. In the proposed method, the priority flag is added to the fixed header of the MQTT in the node to transmit the message, and the broker confirms the priority of the corresponding message and processes it preferentially. Through experiment and evaluation, we confirmed the reduction of end-to-end delay between nodes according to priority.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2198-2202
• /
• 2003

The data transmission of MVB(Multifunction Vehicle Bus) of TCN(Train Network Communication) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard defines the event-polling method for the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages to be transmitted, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the scheduling the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for transmission scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.720-726
• /
• 2004

The data transmission over MVB(Multifunction Vehicle Bus) of TCN(Train Communication Network) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard recommends the event-polling method as the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.137-143
• /
• 2008

In ubiquitous environment the multi-agent system is effective for providing intelligent services. In this paper we introduce a new scheduling service model for improving the communication performance in the multi-agent system. It is achieved by assigning a priority to the message according to the weight of formalized ACL message and the number of messages exchanged between the agents. An experiment reveals that the proposed approach allows smaller processing time per message and turnaround time than the scheduling with the existing JADE platform. Moreover, the proposed scheme allows a scalable messaging system.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.246-248
• /
• 2005

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. However, CAN may exhibit unfair behavior under heavy traffic conditions. When there are both high and low priority messages ready for transmission, the proposed precedence priority filtering method allows one low priority message to be exchanged between any two adjacent higher priority messages. In this way, the length of each transmission delays is upper bounded. These procedures are implemented as local controllers for the ISHURO (Inha Semyung Humanoid RObot).

• Journal of Korea Multimedia Society
• /
• v.17 no.10
• /
• pp.1220-1228
• /
• 2014

Emergency Warning Service will be the most important service of VANET. Transmission delay is the most important performance criteria of the warning service. Most legacy research takes a way to minimize the packet collision. However those approach has a critical weak point on urban environment where there is a blind area of electric wave. So another issue is required in order to provide enhanced warning message propagation technique to overcome the urban environment problem. In this paper, I proposed an enhanced warning message propagation scheme in the poor electric wave environment as the intersection area. Proposed scheme forwards the warning message to the blind area by enhanced forwarding node selection technique. For efficiency of warning message propagation, I suggest forwarding priority for decision of forwarding node. And the node has a direct mode or redirect mode depending on neighbor nodes. The simulation was carried out to evaluate the performance. The simulation results show that proposed scheme has the superior performance compared to legacy warning message technique.