• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.611-612
• /
• 2006

In a manufacturing technique of the sintered filter, pressureless sintering method has good permeability, it is not need the binder and lubricant used on compacting process, so it has little contamination and it is easy to control the pore size and shape but the mechanical strength is low relatively and it is difficult that parts of complicate form are manufactured. In the case of manufacturing the filter by press and sintering method, in order to be satisfactory characteristic of un-pressed filter, in this study sintered metal filter fabricated by using 30-40mesh stainless steel 316L powder and additive agents. Porosity and structure of pores, permeability and mechanical strength of the sintered filter were investigated with the variation sintering conditions. Porosity was nearly constant about $60{\sim}70%$, density, permeability and mechanical strength were changed markedly with quantity of additive materials and sintering conditions.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.37-40
• /
• 2008

The study is an experimental test on full-scale flat plate slab-column interior connection. The punching shear on the flat plate slab-column connection can bring about the reason of the brittle punching shear failure which may result of collapsing the whole structure. From the development of residential flat plate system, the shear reinforcement is developed for preventing the punching shear. For making sure of the punching shear capacity, developed for shear reinforcement in slab-column connection, the structural test is performed. The dimension of the slabs was 2620*2725*180mm with square column (600*800mm). The slabs were tested up to failure monotonic vertical shear forces. The presences of S/S bar and wire mesh substantially increased the punching shear capacity and the ductility of the slab-column connections.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.2
• /
• pp.17-28
• /
• 1995

The purpose of this thesis is to suggest basic objective data for landscape planning and design through the quantitative analysis of the visual impact of pavilion situated in natural landscapes. For this, naturality and visual preference scores of landscape s1ides were measured by questionnaires, visual volumes of pavilion in the natural landscape were evaluated using the Mesh analysis and images structure was analyzed by the factor analysis algorithm The results of this thesis can be summarized as follow. Landscape slides No. 27 and 9 were ranked more highly for naturality, and slides No.22, 28, 6 and 4 were ranked more highly for visual preference. Factors covering the spatial image of the natural landscape were found to be the evaluation, the tidiness and the space volume. By using the control method for the number of factors, T. V., were obtained as 59.0%. For all experimental landscape slides, the factors of evaluation and tidiness were found to be the main factors determining the naturality and visual preference. The naturality and actor scores and the visual preference and factor scores were found to exepress the regression relation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.467-473
• /
• 2017

In this paper, impact characteristics of a water entry gliding vehicle were analyzed using a finite element method. To guarantee the validity of analysis results, a convergence test was performed for several ratios of Euler and Largrange mesh sizes. The impact coefficient was calculated with respect to entry angles and angle of attacks. It can be observed that the impact coefficient was large at a high cross-section gradient and was also affected by cavitation. This study could be useful in the preliminary design stage of a water entry bomb development.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1001-1002
• /
• 2007

This study investigates the dynamic characteristics of Synchronous Reluctance Motor (SynRM), with segmental rotor structure, using finite element method in which the moving mesh technique is considered. The focus of this paper is the efficiency of on-line parameter identification system for position sensorless control of a SynRM under saturation and iron loss. Comparisons are given with angle of the observer and those of proposed FEM & Preisach model of synchronous reluctance motor, respectively. The position sensorless control using identified motor parameters is realized, and the effective of the on-line parameter identification system is verified by experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.76-79
• /
• 2003

The characteristic of single wall carbon nanotube (SW-CNT) and herringbone nano fiber (HB-CNF) emitters was described. SW-CNT synthesized by arc discharge and HB-CNF prepared by thermal CVD were mixed with binders and conductive materials, and then were formed by screen-printing process. In order to obtain efficient field emissions, the surface treatment of rubbing & peel-off was applied to the printed CNT and CNF emitters. The basic structure of FED was of a diode type through fully vacuum packaging. Also, we proposed a new triode type of field emitter using a mesh gate plate having tapered holes and could achieve the ideal triode properties with no gate leakage currents.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.484-490
• /
• 2007

A reciprocating compressor used in domestic refrigerators can be subjected to many different forms of shock. These shocks are usually experienced during transporting the products from a manufacturer to customers. The hermetic structure of this kind of compressor makes it difficult to conduct drop tests for identifying the failure mechanism and their drop behaviors. The drop/impact simulation for a reciprocating compressor has been carried out with the explicit code LS-DYNA and its validation has been experimentally verified. Simulation results are in good agreement with those of drop test. The present method of drop/impact simulation provides an efficient and powerful solution to improve the design quality and reduce the design period.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.434-440
• /
• 2002

This paper proposes a digital storytelling system that employs a method of making users simple online sketch being animated in 3D. To help users focus on their story development, our proposed system gives sketch guidelines providing 3D scene structure, and publishes final results as animated scenes with story text across time. This system is based on the web and the authoring process can also be shared with others.

• Journal of Hydrogen and New Energy
• /
• v.30 no.3
• /
• pp.193-200
• /
• 2019

$RuO_2$, $PtO_2$, and various $(Ru,Pt)O_2$ colloidal solution were prepared using modified Watanabe method. Electrodes were manufactured by dipping of Ni mesh into the colloidal solution. Manufactured electrodes were characterized by XRD, SEM, and EDS. $(Ru,Pt)O_2$ electrodes showed $RuO_2$ crystal structure and high roughness. The hydrogen evolution reaction (HER) activities were evaluated by Linear Sweep Voltammetry. 1Ru2Pt electrode showed similar activity with commercial electrode, HER potentials are -0.9 V for both.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.5
• /
• pp.656-661
• /
• 2019

Currently, the devices to generate ion winds in air are mainly composed of corona electrodes and induction(ground) electrodes, of which the corona electrodes mainly use needles or wires as electrodes and the induction electrodes use plate electrodes of ring or mesh type. Ion winds can be effectively generated through a diverse combination of corona electrodes and induction electrodes mentioned above. However, only changing the form and structure of corona electrodes and induction electrodes has a limit in raising the speed of ion winds. This paper conducted a study on the characteristics of ion wind generation by additionally installing acceleration electrodes in addition to corona electrodes and induction electrodes to increase the speed of ion winds.