• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5B
• /
• pp.295-303
• /
• 2007

An algorithm is proposed to seek a local optimal solution of the network utility maximization problem in a wireless mesh network, where the architecture being considered is an infrastructure/backbone wireless mesh network. The objective is to achieve proportional fairness amongst the end-to-end flows in wireless mesh networks. In order to establish the communication constraints of the flow rates in the network utility maximization problem, we have presented necessary and sufficient conditions for the achievability of the flow rates. Since wireless mesh networks are generally considered as a type of ad hoc networks, similarly as in wireless multi-hop network, the network utility maximization problem in wireless mesh network is a nonlinear nonconvex programming problem. Besides, the gateway/bridge functionalities in mesh routers enable the integration of wireless mesh networks with various existing wireless networks. Thus, the rate optimization problem in wireless mesh networks is more complex than in wireless multi-hop networks.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.103-111
• /
• 2011

Recently, wireless mesh networks are used in various application areas. However, wireless mesh networks have limited bandwidth by the wireless transmission property, and have severe throughput degradation in multi-hop transmission in single channel wireless mesh networks. To solve this problem and support QoS, a lot of routing protocols have been proposed in mesh networks. In this paper, we propose a wireless mesh networks architecture with MPLS for QoS service. The path and traffic management from the application could be independent from QoS routing protocols by using the MPLS in wirelss mesh networks. In this paper, we design a MPLS-based mesh router with IEEE 802.11e for traffic differentiation and investigate the operation by implementation and test.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.959-975
• /
• 2011

Wireless mesh networks enlarge the wireless coverage area by interconnecting relatively stationary wireless routers (mesh routers). As wireless mesh networks are envisioned to provide high-bandwidth broadband Internet service to a large community of users, the Internet gateway, which acts as a central point of Internet attachment for the mesh networks, is likely to suffer heavily from the scramble for shared wireless resources because of aggregated traffic toward the Internet. It causes performance decrement on end-to-end transmissions. We propose a scheme to balance the load in a mesh network based on link quality variation to different Internet gateways. Moreover, under the mesh coverage, mobile nodes can move around and connect to nearby mesh routers while still keeping the connections to the Internet through the best gateway in terms of link quality. In this structure, gateways perform the balancing procedure through wired links. Information about gateways and mobile node's location is distributed appropriately so that every mesh router can quickly recognize the best gateway as well as the positions of mobile nodes. This distributed information assists mobile nodes to perform fast handoff. Significant benefits are shown by the performance analysis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1314-1315
• /
• 2008

Recent research work has unearthed that multi-radio multi-channel wireless mesh networks offer considerable capacity gains over single-radio wireless mesh networks. In this paper, we present a new routing metric for multi-radio multi-channel wireless mesh networks. The goal of the metric is to choose multiple link/node disjoint paths between a source and destination node that, when used concomitantly, impart high end-to-end throughput. The proposed metric selects high fidelity paths that will produce elevated throughput with maximum fault tolerance.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.374-385
• /
• 2010

Wireless mesh networks can be deployed for various networks from home networking to last-mile broadband Internet access. Wireless mesh networks are composed of mesh routers and mesh clients. In these networks, static nodes form a multi-hop backbone of a large wireless access network that provides connectivity to end-users' mobile terminals. The network nodes cooperate with each other to relay data traffic to its destinations. In order to increase connectivity and better performance, researchers are getting interested in multi-channel and multi-interface wireless mesh networks. In these networks, non-overlapping multiple frequency channels are used simultaneously to increase the aggregate bandwidth available to end-users. Recently, researches have focused on finding suitable channel assignments for wireless network interfaces, equiped in a mesh node, together with efficient routing to improve overall system throughput in wireless mesh networks. This goal can be achieved by minimize channel interference. Less interference among using channels in a network guarantees more aggregated channel capacity and better connectivity of the networks. In this thesis, we propose interference aware channel assignment and routing algorithms for multi-channel multi-hop wireless mesh networks. We propose Channel Assignment and Routing algorithms using Traffic Profiles(CARTP) and Routing algorithms allowing detour routing(CARTP+2). Finally, we evaluate the performance of proposed algorithms in comparison to results from previous methods using ns-2 simulations. The simulation results show that our proposed algorithms can enhance the overall network performance in wireless mesh networks.

• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.384-393
• /
• 2015

This paper proposes an insect behavior-inspired routing algorithm for large-scale wireless mesh networks. The proposed algorithm is adapted from the behavior of an insect called Bombyx mori, a male silkmoth. Its unique behavior is its flying technique to find the source of pheromones. The algorithm consists of two steps: the shortest-path algorithm and the zigzag-path algorithm. First, the shortest-path algorithm is employed to transmit data. After half of the total hops, the zigzag-path algorithm, which is based on the movement of the male B. mori, is applied. In order to adapt the biological behavior to large-scale wireless mesh networks, we use a mesh topology for implementing the algorithm. Simulation results show that the total energy used and the decision time for routing of the proposed algorithm are improved under certain conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.778-785
• /
• 2020

Wireless mesh networks consist of mesh clients, mesh routers and mesh access points. The mesh router connects wireless network services to the mesh client, and the mesh access point connects to the backbone network using a wired link and provides Internet access to the mesh client. In this paper, a limited number of mesh routers and mesh access points are used to propose optimization algorithms for network design for wireless mesh networks. The optimization algorithm in this paper has been applied with a sub-subscription algorithm, which is one of the meta-heuristic methods, and is designed to minimize the transmission delay for the placement of mesh routers and mesh access points, and produce optimal results within a reasonable time. The proposed algorithm was evaluated in terms of transmission delay and time to perform the algorithm for the placement of mesh routers and mesh access points, and the performance evaluation results showed superior performance compared to the previous meta-heuristic methods.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.117-126
• /
• 2009

Wireless mesh networks (WMNs) consist of mesh routers and mesh clients, where mesh routers have minimal mobility and form the backbone of WMNs. They provide network access for both mesh and conventional clients. The integration of WMNs with other networks such as the Internet, cellular, IEEE 802.11, IEEE 802.15, IEEE 802.16, sensor networks, etc., This paper presents a secure and efficient authentication mechanism for Wireless mesh network. The validity of proposed mechanism is provided by BAN logic and the efficiency of suggested mechanism is showed through the performance evaluation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.113-123
• /
• 2009

Wireless mesh networks have been studied as the next generation technology to solve problems of conventional wireless networks. Particularly, mobile WiMAX based wireless mesh networks are noticed due to many advantages. In this paper, we propose a layer-2 handover scheme for mobile WiMAX based wireless mesh networks. A layer-2 handover scheme based on mobile WiMAX causes many handover failures over mobile WiMAX based wireless mesh networks because it does not consider the characteristics of wireless mesh networks. The proposed scheme does not bring about packet losses achieving lower handover latency than a conventional handover scheme. Simulation results show that the proposed scheme achieves loss-free and low handover latency during the layer-2 handover.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.671-674
• /
• 2007

USN (Ubuquitous Sensor Network) identifies that networks are able to gather information from various kinds of sensors with RF. In the USN, it is important that sensor nodes deliver stable data by overcoming limited transmission distance and by setting optimum routes. In this paper, we propose a method to overcome the limited distance of sensor nodes using Wireless Mesh Networks. With this method, environmental monitoring system for u-farm support stable data transmission by applying MAP of Wireless Mesh Networks.