• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.4
• /
• pp.928-936
• /
• 2013

This thesis is the fundamental study on the adaptation of escape device for reducing small fishes in set-net. The escape devices for experiments were made the mesh-type devices with three different mesh sizes (60.6, 75.8 and 120.0mm). The experiments of size selectivity on escape devices were conducted by using two kinds of species as black rockfish (Sebastes schlegeli) and sea perch (Lateolabrax maculatusi) in the experimental tank. The size selectivity curve was fitted by using a logistic function and the parameters of selectivity curve were estimated by a maximum likelihood method. In the results; 50% selection ranges for the mesh-type escape devices with three different mesh sizes were; a black rockfish was 18.99 in mesh size 60.6mm and 21.96 in mesh size 75.8mm (120mm could not estimate). A sea perch was 22.02 in mesh 60.6mm and 24.46 in mesh size 75.8mm (120mm could not estimate). The 50% selection range of a black rockfish was wilder than a sea perch about 1.1~.2 time. Therefore, the small fishes are able to reduce by using the mesh type escape device. However, the optimum mesh size should be decided to consider the size of target species and economics of catches.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.301-309
• /
• 2012

A net-assembling company for gill net fishing gears makes a design based on the size of nets provided and determines floats, types of weights, and numbers. In addition, through the accurate examination of net weights in the process of fishing gear designing, it can prevent an excessive use of designing costs. The weight of twine can be easily calculated by its thickness differences, but the weight of netting has errors to be calibrated since the weight of netting is not changing exponentially with the changes of number and size of meshes. This study aims to suggest and empirically analyze the methods for estimating the weights of netting in accordance with the changes of number, size and thickness of meshes for a sound management of netting and net-assembling companies. Results indicated that the method using the knots and legs of netting was not practically usable because the errors were increased as the number of mesh increased. However, the method using netting area shown its usage potentiality with the calibration of the increasing ratio of mesh numbers.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.2
• /
• pp.99-111
• /
• 2008

The purpose of this study is to develop the jellyfish separator system(JSS) for reducing fishery damage by the increase of jellyfish in the sea area of Korea in summer. First of all, to find the optimum structure of a JSS, six types of JSS in trawl fishery were designed and manufactured, the underwater shape of JSS and the separating process by JSS were observed in the circulating water channel(CWC). And the field experiments were carried out in July and September 2004 in the southern sea of Korea. For the moving path of the jellyfish model in the CWC, in case that the model was larger than the mesh size of the separator net, it was guided toward the lower part of the separator net by the guiding net and discharged through the outlet. In case that the model was smaller than the mesh size of the separator net, some models which passed through the upper part of the guiding net were smaller than the mesh size of the guiding net and discharged through the outlet and most of the model which passed through the lower part of the guiding net moved to the codend passing through the separator net. According to the field experiment result, the optimum tilt angle of separator net was inferred $20^{\circ}$ that the discharge rate of jellyfish was higher than the other tilt angle of separator net and the optimum structure of JSS was inferred GS type(consists of guiding net and separator net) that the discharge rate of jellyfish was higher than S type(consists of separator net). It was demamded to carry out more study for the countermeasure to reduce loss of fish.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.448-455
• /
• 2020

This study was carried out to investigate reduction of the frost damage using the mesh net used for the purpose of non-bagged cultivation. A device measuring the weight of frost was developed and installed in both the control and the experimental, and the effect of frost reduction was evaluated with their weights. As a result, weight of frost in the control was reduced from 37% to 59% with mesh net on the day the frost was observed. In addition, the device for automatically observing the amount of frost was developed and the height of the windbreak of the frost measuring device was determined to be 30 cm through wind tunnel experiment. The results of this study are expected to reduce frost damage during the flowering season of fruit trees by installing mesh net and it is expected to be used as basic data for agricultural use of mesh net.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.1
• /
• pp.9-16
• /
• 2016

This study was conducted to analyze fishing capacity and bycatch by mesh size and entrance size of spring net pot conducted by water tank and field experiment. The water tank experiments were conducted by using traps with mesh size of 22 mm and entrance size of 120 mm and 140 mm, respectively in the water tank of NIFS. The field experiment was conducted using 5 kinds of spring net pot with mesh sizes of 20 mm, 22 mm, 35 mm and entrance size of 120 mm, 130 mm, 140 mm, 360 mm by coastal trap fishery vessel operating around the area of Geoje island. In the result of water tank experiments, the catch of conger eel was 1.5 times higher when using trap with entrance size of 140 mm than that of 120 mm. In the field experiment, when using same mesh size, the larger the entrance size, the higher amount of conger eel catch, bycatch and number of bycatch species. When using the same entrance size, the larger the mesh size, the lower amount of conger eel catch and number of bycatch species, whereas the amount of bycatch showed increasing trend.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.1
• /
• pp.1-17
• /
• 2013

The investigation for species composition and catch in the Korean deep-water of the East Sea (also known as Sea of Japan) was carried out with trammel nets of 7 mesh sizes (6.1~24.2cm) offshore Donghae (2006) and Yangyang (2007) of Korea. The catches were 1,268kg and composed of 37 species between 200m and 1,200m in depth. The principal species caught were Taknka's snailfish, salmon snailfish, red snow crab, hunchback sculpin, snow crab, spinyhead sculpin, Tanaka's eelpout, Alaska cod and so on. Those were target fish for commercial value except salmon snailfish. The mesh sizes for the largest catch were 10.6cm and 15.2cm in the fishing ground of Donghae and Yangyang, respectively. The habitat of snow crab was shallower than that of red snow crab in both areas. Trammel net enabled to investigate fish in deep-water with small fishing vessel and rather cheap expenses in contrast to bottom trawl that required too much of it. With increasing inner mesh size of trammel net the mean size of some principal species such as Taknka's snailfish, spinyhead sculpin, hunchback sculpin, Pacific cod, snow crab, red snow crab and hybrid between snow crab and red snow crab tended to be large in certain range of mesh size.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.4
• /
• pp.371-379
• /
• 1992

In order to analyse the mesh selectivity for the trawl net, the fishing experiment was carried out by the training ship Saebada in the southern Korea Sea and the East China Sea from June 1991 to August 1992. The trawl net used in experiment has the trouser type of cod-end with cover net, and the mesh selectivity was examined for the five kinds of the opening mesh size in its cod-end part. The selection curves and the selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b))), and in this case, a and b are the selection parameters and L is the body length of the target species of fishes. In this report, the four species of aquatic animals were analysed because the catch data were enough to calculate normally the selection curves and the selection parameters, and the results obtained are summarized as follows: 1. Trachurus japonicus; Selection parameters a and b in each cases of the opening mesh size of 51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm were respectively 0.5050 and -5.4283, 0.3018 and -4.9590, 0.3816 and -7.3659, 0.2695 and -5.7958, 0.2170 and -5.1226. 2. Photololigo edulis ; Selection Parameters a and b in each cases of the former mesh sizes were respectively 0.7394 and -6.1433, 0.3389 and -4.2366, 0.3286 and -5.1002, 0.2543 and -5.0049, 0.1795 and -4.8040. 3. Trichirus lepturus; Selection curves in the opening mesh size of 111.3mm was calculated unnormally. The selection parameters in the other opening mesh sizes were respectively 0.3790 and -5.2891, 0.2071 and -4.9164, 0.1292 and -3.1733, 0.1153 and -3.8497 in the order of former mesh sizes except 111.3mm. 4. Todarodes pacificus ; Selection curve in case of the opening mesh sizes, 70.2mm and 111.3mm were calculated unnormally. In the order cases of the opening mesh sizes, the selection parameters were respectively were 0.5766 and -6.0169, 0.3735 and -5.4633, 0.2771 and -5.7718 in the order of former mesh sizes except 70.2mm and 111.3mm.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.1
• /
• pp.88-98
• /
• 2014

Despite of emerging and increasing concerns to microplastics, no standard methodology has not been proposed for determination of microplastics. This study aims to develop the analysis method for microplastics in seawater by overviewing methodologies proposed by previous studies and by assessing some processes in those methodologies which possibly cause uncertainties in microplastic determination. Furthermore, we present preliminary results of distribution characteristics of microplastics in seawater of Incheon/Kyeonggi coastal region which is based on our new methodology. Microplastics in surface microlayer (SML) and subsurface water (SSW) were collected using mesh screen and planktonic nets (trawl net with $330{\mu}m$ mesh size and hand net with $20{\mu}m$ mesh size), respectively. Microplastics with < $300{\mu}m$ was predominant, indicating hand net as the better collection tool for SSW. As for SML, FT-IR based microplastic concentration was well matched with naked-eye based concentration which has been used in most of previous studies. However, a poor relationship was observed for SSW, indicating that concentration data of previous SSW studies should be corrected. Incheon/Kyeonggi bay seawater contained the similar concentration range with those in coastal region of the Nakdong River. Our methodology can be used as a basic tool for further microplatic studies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.3
• /
• pp.177-182
• /
• 1993

In order to estimate the mesh selectivity master curves and the optimum mesh size, experiments were made by the cover net method with the cod-ends of the five different the opening mesh sizes(51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm). After that 163 hauling were performed and there by investigated, on the training vessel Saebada in the Southern Korean Sea and East China Sea from June 1991 to August 1992. In this report, the mesh selectivity master curves were fitted by using logistic function(S=1/(1+exp super(-(aR+b))), R=(L-L sub(0))/(M-M sub(0)) and the optimum mesh sizes were estimated from each master curve. In this case, a and b are the selection parameters, M is the mesh size of each experimental cod-end. L is body length, L sub(0) and M sub(0) is the distance from the coordinate origine to intersection of linear regression between 25% and 50% selection length. The results obtained are summarized as follows; 1. Trachurus japonicus: Mesh selectivity master curve parameters: a and b were 2. 25, -4.73 respectively and optimum mesh size was estimated to be 79.3mm. 2. Trichiurus lepturus: Mesh selectivity master curve parameters: a and b were 0.81, -3.17 respectively and optimum mesh size was estimated to be 64.5mm. 3. Photololigo edulis: Mesh selectivity master curve parameters: a and b were 1.30m, -4.10 respectively and optimum mesh size was estimated to be 89.9mm. 4. Todarodes pacificus: Mesh selectivity master curve parameters: a and b were 1. 35, -3.45 respectively and optimum mesh size was estimated to be 89.4mm.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.327-339
• /
• 2018

This article presents a new global-local hybrid coarse-mesh finite difference (HCMFD) method for efficient parallel calculation of pin-by-pin heterogeneous core analysis. In the HCMFD method, the one-node coarse-mesh finite difference (CMFD) scheme is combined with a nodal expansion method (NEM)-based two-node CMFD method in a nonlinear way. In the global-local HCMFD algorithm, the global problem is a coarse-mesh eigenvalue problem, whereas the local problems are fixed source problems with boundary conditions of incoming partial current, and they can be solved in parallel. The global problem is formulated by one-node CMFD, in which two correction factors on an interface are introduced to preserve both the surface-average flux and the net current. Meanwhile, for accurate and efficient pin-wise core analysis, the local problem is solved by the conventional NEM-based two-node CMFD method. We investigated the numerical characteristics of the HCMFD method for a few benchmark problems and compared them with the conventional two-node NEM-based CMFD algorithm. In this study, the HCMFD algorithm was also parallelized with the OpenMP parallel interface, and its numerical performances were evaluated for several benchmarks.