• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.7_8
• /
• pp.381-386
• /
• 2003

In this paper, we consider the problem of embedding complete binary trees into 3-dimensional meshes. The method of embedding a complete binary tree into 3-dimensional mesh with the link congestion two is considered in [1], and the embedding in [2] shows that a complete binary tree can be embedded into a ,3-dimensional mesh of expansion 1.27. The proposed embedding in this paper shows that a complete binary tree can be embedded into a 3-dimensional mesh of expansion approximately 1.125 with the link congestion one, using the dimensional ordered routing. Such method yields some improved features in terms of minimizing the link congestion or the expansion of embedding comparing to the previous results.

• Membrane Journal
• /
• v.17 no.3
• /
• pp.174-183
• /
• 2007

The manufacturing process of metal membrane made of only metal mesh and both metal mesh and powder with using rolling process have been studied. In the rolling of metal mesh, selected metal meshes were rolled with the reduction ratio of 10%, 20%, and 30%, respectively. Such rolling process resulted in the decrease of mesh pore size through reduction the cross sectional area of mesh and changing the diameter of mesh wires. Also, it enhanced the filtration ratio of rolled mesh which is almost same as the filtration ratio of upper grade unrolled mesh and the reliability of membrane by making pore size distribution become more uniform. In fabricating metal powder layer onto metal mesh, using PVA(polyvinyl alcohol) as a binder of powder, drying the metal powder layer at $100^{\circ}C$ for 1 hr, and sintering it at $1,000^{\circ}C$ for 3 hr in vacuum were to be optimum conditions for obtaining good quality of metal powder layer on metal mesh with high pore density but no crack. With additional rolling of metal powder layer on metal mesh with 30% reduction before sintering, metal membrane which filtration ratio is about $0.7{\mu}m$ has been successfully manufactured.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.1-9
• /
• 2022

In this study, the selection action on the mesh in the net pot for whelk (Buccinum opisthoplectum) is experimentally considered, and the selectivity was compared by the SELECT model and the Nashimoto's method with the probability model according to the contact shape of the mesh and the whelk. The experiments of the mesh size selectivity was conducted for two mesh sizes: 70 mm (inner stretched size 65.4 mm) and 44 mm (inner stretched size 39.5 mm). Selectivity experiments were conducted three times in total for each mesh size used 264 whelks. In addition, Nashimoto's method analyzed the retention probability using probability model for whether the mesh passed or not based on the carapace width of the whelk. As a result of the selectivity analysis, the 50% selection carapace width for the mesh size of 70 mm was similar to 43.62 mm in the SELECT model and 42.64 mm in the Nashimoto's method. However, the 44 mm mesh with relatively small mesh size showed differences of 40.01 mm and 26.80 mm, respectively. As for the mesh size selectivity of whelk, it was found that the smaller the mesh size, the lower the selectivity. In addition, in the selectivity study on the mesh size of whelk, an evaluation method that closely considers the contact shape between the mesh and the target species is required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2C
• /
• pp.193-200
• /
• 2003

In this paper, we propose a motion estimation method using hierarchical triangulation that changes the triangular mesh structure according to it's motion activity. The subdivision of triangular mesh is performed from the amount of motion that is calculated from the variance of image difference. As a result, node distribution is concentrated on the region of high activity. The subdivision method that makes it possible to yield hierarchical triangular mesh is proposed as well as the additional information reduction coding method for hierarchical mesh structure is described. By the simulation, proposed method have better performance than the conventional BMA(Block Match Algorithm) and the other mesh based method.

• Applied Biological Chemistry
• /
• v.31 no.1
• /
• pp.13-20
• /
• 1988

The hydration characteristics of four naked baley varieties by different kernel sizes were investigated. The predominant kernel size was 7 mesh, followed by 10 mesh kernel, of which comprised $86{\sim}94%$ of the total kernel. Diffusion coefficients of naked barleys at $40^{\circ}C$ increased as the kernel sizes decreased. The volume increases of naked barleys were linearly related to the moisture gain, regardless variety and kernel size.

• The KIPS Transactions:PartA
• /
• v.15A no.6
• /
• pp.301-308
• /
• 2008

The crossed cube has received great attention because it has equal or superior properties to the hypercube that is widely known as a versatile parallel processing system. It has been known that a mesh of size $2{\times}2^m$ can be embedded into a crossed cube with dilation 1 and expansion 1 and a mesh of size $4{\times}2^m$ with dilation 1 and expansion 2. However, as we know, it has been a conjecture that a mesh with more than eight rows and columns can be embedded into a crossed cube with dilation 1. In this paper, we show that a mesh of size $2^n{\times}2^m$ can be embedded into a crossed cube with dilation 1 and expansion $2^{n-1}$ where $n{\geq}1$ and $m{\geq}3$.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.51-62
• /
• 1999

The objective of this research is to develop paper sludge reinforced thermoplastic composites which incorporate the advantages of each component materials. The effects of paper sludge content(0, 10, 20, 30, 40----), mesh size(20~40, 60~80, less than 100mesh), and coupling agent(Epolene E-43 and Epolene G-3003) on the mechanical properties of paper sludge-polypropylene composites were investigated. Composite density increased with an increase in the paper sludge content. When paper sludge is incorporated into a polypropylene matrix, the flexural properties of the composite increase significantly with an increase in the paper sludge mixing ratio. Especially, flexural modulus was improved with increasing paper sludge content. The flexural strength of composites was improved, but flexural modulus reduced somewhat with decreasing paper sludge particle size. The flexural properties of paper sludge-polypropylene composites were improved by using coupling agents to enhance the bonding between reinforcing filler and matrix. Use of the epolene E-43 and G-3003 resulted in considerable improvement in the flexural strength over control specimens. The flexural strength of the G-3003 composite system is higher than that of the E-43 system. Generally, izod notched impact strength of paper sludge-polypropylene composite decreased slightly, whereas izod unnotched impact strength decreased significantly with increasing paper sludge contents. There was no effects of paper sludge particle size on impact strength of paper sludge-polypropylene composites. And izod unnotched impact strength of epolene E-43 composite system sharply decreased but that of G-3003 composite system was no tendency with increasing additive content.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1720-1725
• /
• 2004

Absorption characteristics of green tea powder were investigated. The monolayer moisture content determined by GAB equation was 0.024~0.052 g $H_2O$/g dry solid. The absorption enthalpy was calculated with different particle size and various water activities. It showed that the absorption energy was decreased with increasing water activity but no difference was found on particle size increasement. Among models applied for predicting equilibrium moisture content, Halsey model was the best fit model for green tea powders, showing the lowest prediction deviation of 2.1~4.0%. The prediction model equations for the water activity was established as function of relative humidity, time and temperature. The model equation will be helpful for future work on drying and storage of green tea powder.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.88-94
• /
• 2003

In this paper, we propose a hierarchical triangular mesh generation method based on the motion information and a fast rude convergence method. From the variance of Image difference we decide the region that subdivision is required and perform the adequate triangulation method that is possible to yield a successive hierarchical triangulation. For fast node convergence, in initial search, we use the refinement method that separate the backgroung and object region and maintain the mesh connection by using the bilinear interpolation. The simulation result demonstrate that proposed triangulation method have performance in PSNR than the conventional BMA or order mesh based method and refinement is appropriate for the case of the mesh size is small.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.505-516
• /
• 2009

The effects of wood species, particle size of wood flours and coupling treatment on the mechanical properties of wood plastic composites (WPC) are investigated in this study. Chemical components of wood flour from 3 different wood species were analyzed by the chemical analysis. Wood flours of 40~60 mesh and 80~100 mesh were manufactured from Larix (Larix kaempferi Lamb.), Quercus (Quercus accutisima Carr.), and Maackia (Maackia amuresis Rupr. et Maxim). The wood flours were reinforced into polypropylene (PP) by melt compounding and injection molding, then tensile, flexural, and impact strength properties were analyzed. The order of alpha-cellulose content in wood is Quercus (43.6%), Maackia (41.3%) and Larix (36.2%). The order of lignin content in wood is Larix (31.6%), Maackia (24.7%), and Quercus accutisima (24.4%). The content of extractives in wood is in the order of Larix (8.5%), Maackia (4.4%), and Quercus accutisima (3.9%). As the content of alpha-cellulose increases and the lignin and extractives decreases, tensile and flexural strengths of the WPC increase. At the same loading level of wood flours, the smaller particle size (80~100 mesh) of wood flours showed highly improved tensile and flexural strengths, compared to the larger one (40~60 mesh). The impact strength of the WPC was not significantly affected by the wood species, but the wood flours of larger particle size showed better impact strengths. The addition of maleated polypropylene (MAPP) provided the highly improved tensile, flexural and impact strengths. Morphological analysis shows improved interfacial bonding with MAPP treatment for the composites.