• Journal of The Korea Institute of Healthcare Architecture
• /
• v.14 no.1
• /
• pp.7-20
• /
• 2008

This study is an analysis of the characteristics between the remodeling of an existing hospital and the remodeling of an existing hospital with the addition of a new annex. The comparison of the two remodeling methods focused on the difference of gross area, circulation system, improvement of hospital function, profitability of remodeling construction, and so on. The result of this study can be summed up as follows. The remodeling of an existing hospital with a new annex has the merit of enlarging new areas, promoting the function of the hospital, changing the inner circulation system, and facilitating the construction. However, it has the demerit of requiring too much money and expanded space for the construction. Therefore, it is possible to use the existing hospital remodeling method for small scale hospitals that do not have many patients, but it would be necessary for big scale hospitals with many patients to adopt the method of remodeling the existing hospital with the addition of an annex.

• Journal of Institute of Convergence Technology
• /
• v.11 no.1
• /
• pp.33-37
• /
• 2021

The application of multicopters using a battery is limited by the short endurance due to the low energy density. A propeller is one of crucial components that determine the performance of the multicopter. In the present study, a systematic method for predicting the endurance of multicopters is described. Propeller performance database are constructed using the data from UIUC Propeller Data Site. Using the 'trendline' function of MS Excel software, the performance of the commercial propellers are represented as a function of polynomials. The multicopter's endurance is computed iteratively using Peukert's Law and considering the voltage drop effect. We evaluated the endurance of multicopters that use commercial propellers. The endurance of the multicopter was within the range of 28 min. to 36 min. It is expected that the present method can be utilized for optimal propeller selection for the given multicopters.

• Journal for History of Mathematics
• /
• v.27 no.4
• /
• pp.271-283
• /
• 2014

This study takes a look at Polya's analysis on Archimedes' "The Method" from a math-historical perspective. We, based on the elaboration of Polya's analysis, investigate the analytic geometric characteristics of Archimedes' "The Method" and discuss the way of using the characteristics in education of school calculus. So this study brings up the educational need of approach of teaching the definite integral by clearly disclosing the transition from length, area, volume etc into the length as an area function under a curve. And this study suggests the approach of teaching both merit and deficiency of the indivisibles method, and the educational necessity of making students realizing that the strength of analytic geometry lies in overcoming deficiency of the indivisibles method by dealing with the relation of variation and rate of change by means of algebraic expression and graph.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.718-721
• /
• 2007

The ionic-polymer-metal-composite actuators have the best merit for bio-mimetic locomotion because of their large bending performance. Especially, they have the advantage for mimicking a fish-like motion because IPMCs are useful to be actuated in water. So we have developed IPMC actuators with multiple electrodes for realization of biomimetic motion. This actuator is fabricated by combining electroless plating and electroplating techniques capable of patterning precisely and controlling a thickness of Pt electrode layer. The FRF analysis was conducted by a mechanical shaker and direct electrical excitation which is based on sweep sine wave function. From this result, the proper young‘s modulus of Platinum was investigated and applied on expecting the vibration characteristics of patterned IPMC actuator. The calculated maximum displacement of the patterned IPMC was 2.32mm under an applied 4mN/mm. The natural frequency was increased however displacement was decreased in according to increase a thickness of Pt.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.31.1-31.1
• /
• 2011

In this study, we investigated alignment state estimation performances of the three methods i.e. merit function regression (MFR), differential wavefront sampling (DWS) and Multiple Design Configuration Optimization (MDCO). The three target optical systems are 1) a two-mirror Cassegrain system for deep space Earth observation, 2) intermediate size three-mirror anastigmat for Earth ocean monitoring, and 3) extremely large segmented optical system for astronomical observation. We ran alignment state estimation simulation for several alignment perturbation cases including 1mm to 10mm in decenter and from 0.1 to 1 degree in tilt perturbation error for the two-mirror Cassegrain system. In general, we note that MDCO shows more competitive estimation performance than MFR and DWS. The computational concept, case definition and the simulation results are discussed with implications to future works.

• Journal of Powder Materials
• /
• v.3 no.4
• /
• pp.253-259
• /
• 1996

The efficiency of thermoelectric devices for different applications is known to depend on the thermoelectric effectiveness of the material which tends to grow with the increase of its chemical homogeneity. Thus an important goal for thermal devices is to obtain chemically homogeneous solid solutions. In this work, the new process with rapid solidification (melt spinning method) followed by hot pressing was investigated to produce homogeneous material. Characteristics of the material were examined with HRD, SEM, EPMA-line scan and bending test. Property variations of the materials were investigated as a function of variables, such as dopant ${CdCl}_{2}$ quantity and hot pressing temperature. Quenched ribbons are very brittle and consist of homogeneous $Bi_2Te_3$, ${Bi}_{2}{Se}_{3}$ solid solutions. When the process parameters were optimized, the maximum figure of merit was 2.038$\times$$10^{-3}K^{-4}. The bending strength of the material hot pressed at 50$0^{\circ}C$ was 8.2 kgf/${mm}^2$.

• Korean Journal of Bronchoesophagology
• /
• v.16 no.1
• /
• pp.5-10
• /
• 2010

Objectives The purpose of this article was to review the video-assisted mediastinoscopic surgery (VAM) as diagnostic or therapeutic tools. Summary The VAM was indicated in diagnosis of pleural diseases, dissection or sampling of mediastinal or paraesophageal lymph nodes, nodal staging in lung cancer, or various therapeutic approaches. The advantages of VAM were included that was less painful, cosmetic merit, no need additional drain, and no effect of cardiopulmonary function. It was provided to surgeons wider and more detail operational field rather than conventional mediastinoscopic surgery. It was useful tool as training beginner surgeon, Although the VAM had limited indications, it would be feasible and important multi-purposal operational tools in mediastinal, pleural and lung diseases.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.3
• /
• pp.36-41
• /
• 1974

Two realigation procedures of any open-circuit transfer functions are presented through the use of genera1ized immitance converters composed of two operational amplifiers and passive elements. The fast precedure is to select the admittance conversion, h(s), to be k/s , and the second one to be k/s. The merit of the second procedure is the elimination of capacitors in passive networks, however, requires more CGIC's than the first. The second-order transfer function is realiged in the two methods under discussion to find that the sensitivity of Q factor and the undamped oscillation frequency to the variation of circuit elements. The first procedure proved to be favorable from the view point of sensitivities.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.72-79
• /
• 1997

Most open magnetic resonance imaging systems have used the planar gradient coils whose inductances were minimized through the magnetic energy minimization procedure in the spatial frequency domain. Though the planar gradient coils have smaller inductance than conventional gradient coils, the planar gradient coils often suffer from their poor magnetic field linearity. Scaling the spatial frequencies of the current density function designed by the magnetic energy minimization, magnetic field linearity of the planar gradient coils can be greatly improved with small sacrifice of gradient coil inductance. We have found that the figure of merit of the planar gradient coils, defined by the gradient strength divided by the linearity error and the inductance, can be improved by proposed technique.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.87-93
• /
• 2002

In this paper, an advanced load balancing algorithm in nth order Hypercube distributed system has been proposed. The new algorithm uses centralized load-balancing to avoid blocking phenomenon and processor thrashing, and shows the results which makes loads to approach average value of loads. The new algorithm is compared with several other algorithm and it shows a merit in cost function value.