• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.393-398
• /
• 2004

This research offers recycling method of NaOH from mercerizing process of cotton fabric. The measuring system of NaOH concentration was designed for the mercerizing process and tested for various conditions which can be occurred in factory. The accuracy of the system was varied as the testing condition was changed. As the concentration of sulfuric acid used for titrating NaOH decreased, the accuracy of measuring system increased. The concentration of NaOH for waste water collected from mercerizing process was measured by 5.2%. As the ratio of newly mixed NaOH increased, moisture regain. water absorbency and whiteness of the specimen increased. The bending rigidity(B) and shear rigidity(G) decreased, as the ratio of newly mixed NaOH increased.

• 한국의류산업학회지
• /
• 제7권4호
• /
• pp.439-444
• /
• 2005

This article describes the change in the hand value of chitosan-crosslinked cotton fabrics. The chitosan-crosslinked cotton fabrics were manufactured by mercerizing process using epichlorohydrin(ECH), 2% aqueous acetic acid and 20% aqueous sodium hydroxide. It proposed that the crosslinking and mercerizing were performed with the mixture of four different molecular weight chitosan and ECH in a single step. Cotton fabrics were dipped in the mixed solution of chitosan and ECH, picked up by mangle roller, pre-dried at $130^{\circ}C$, mercerized and crosslinked in NaOH solution and finally washed and dried. Mechanical and physical properties of the chitosan crosslinked fabric were measured on concentration and molecular weight by Kawabata Evaluation System(KES) and other instruments. As the concentration of chitosan solution increased, LT, WT, B, 2HB were increased. WT, B, 2HB, MIU, SMD, $T_0$, $T_m$ were decreased when chitosan was depolymerized. On the other hand, RT was increased when chitosan was depolymerized.

• 한국의류산업학회지
• /
• 제6권5호
• /
• pp.660-666
• /
• 2004

This article describes the change of hand value of chitosan crosslinked cotton fabrics. The chitosan crosslinked cotton fabrics were manufactured by mercerizing process using epichlorohydrin(ECH) as crosslinkins agent, 2% aqueous acetic acid as a solvent of chitosan and ECH, and 20% aqueous sodium hydroxide as a mercerizing agent and crosslinking catalyst. Cotton fabrics were dipped in the mixed solution of chitosan and ECH, picked up by mangle, mercerized and crosslinked in NaOH solution, and finally wash and dry. Mechanical and physical properties of the chitosan crosslinked fabric were investigated using Kawabata Evaluation System(KES) and other instruments. Tensile energy and tensile strain were decreased with the increase of the concentration of chitosan. Tensile resilience, compression resilience bending rigidity, bending hysteresis, shear stiffness, shear hysteresis, coefficient of friction, geometrical roughness, compression linearity, compressional energy, and thickness were increased with the increase of the concentration of chitosan. On the other hand, bending rigidity, bending hysteresis, coefficient of friction, geometrical roughness, compressional resilience, and thickness were increased with the increase of the concentration of crosslinking agent(epichlorohydrin).

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2004년도 추계학술발표회 논문집
• /
• pp.148-152
• /
• 2004

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.544-551
• /
• 2008

In this study, the colorants of Amur cork tree were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of Amur cork tree and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(Amur cork tree) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. On the surface color change, the fabric of no-chitosan finished and no-mordanted has greenish yellow. The more crosslinked chitosan on cotton fabrics has the more turned down greenish on the surface color, as increasing the concentration of chitosan, greenish color turn down to the yellow close the 90o hue angle. In all sorts of fabrics, dyeability(K/S) is slightly affected by the number of manufacturing process and the concentration of chitosan. But only mercerized cotton fabric has higher dyeability (K/S) than mordant treated cotton fabrics. Wash fastness has little different results by each condition, but almost similar values. Light fastness was improved with chitosan treatment on cotton fabric.

• 한국의류산업학회지
• /
• 제10권2호
• /
• pp.260-266
• /
• 2008

Recently there has been a growing interest in the use of natural dyes in textile applications. Natural dyes can exhibit better biodegradability and generally have a higher compatibility with the environment. In this study, the colorants of clove were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of clove and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light, and the effects on antimicrobial properties were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(clove) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. The dyeability(K/S), which was obtained by CCM observation, remarkablely became increased when the crosslinked chitosan concentration was higher. The hue value indicated reddish yellow with increasing the crosslinked chitosan concentration. And the color fastness to washing and light was the almost the same. The chitosan treated cotton fabrics showed very high activities with almost 100% reduction.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.1-7
• /
• 1994

Cotton fiber and NaOH-mercerized cotton fiber had been treated by liquid ammonia and were dyed with two direct dyes, C.I. Direct Red 2 and Blue 1. The effect of the treatment on the rate of dyeing, dye adsorption isotherm, and affinity were studied. The rate of dyeing was increased in the order of NaOH-mercerized> NaOH/liquid ammonia-treated > liquid ammonia-treated>Untreated cotton irrespective of kind of dyes. The rate of dyeing for NaOH-treated fiber considerably increased, whereas liquid ammonia-treated or NaOH/liquid ammonia-treated did not because the structural transformation was not enough for the dyes to penetrate easily into the liquied ammonia-treated cottons. The time of half-dyeing was considerably reduced by mercerizing with NaOH, but lengthened by liquid ammonia treatment because of increased equilibrium dye exhaustion especially in dyeing with C.I. Dierect Red 2. In spite of a short time of the ammonia treatment for 4 seconds, the equilibrium exhaustions of both of direct dyes, C.I. Direct Red 2 and C.I. Direct Blue 1, were increased in proportion to internal volume of treated cotton under a condition of fixed affinity.

• 한국염색가공학회지
• /
• 제3권1호
• /
• pp.37-45
• /
• 1991

면직물의 Embossing 가공은 의류, 종이, 가죽 제품 등에 수요가 상당히 많고, Moire 및 Schreiner 가공은 의류에 이용되고 있다. 原布(grey)$\rightarrow$(2) 檢布(cloth inspection).標識(marking)$\rightarrow$((3) 節取(knotting), 修正(mending), 汚染빼기(stain removing)$\rightarrow$((4) 필이음(cloth sewing).rolling$\rightarrow$((5) 燒毛(singeing)v(6) 糊拔(desizing)$\rightarrow$((7) 水洗(washing)$\rightarrow$((8) 精練(scouring)$\rightarrow$((9) 水洗(washing)$\rightarrow$((10) 漂白(bleaching)$\rightarrow$((11) 水洗(washing)$\rightarrow$((12) 酸處理(souring)$\rightarrow$((13) 水洗(washing)$\rightarrow$((14) 打布(scutching)$\rightarrow$((15) 脫鹽素處理(dechlorination).水洗 (16) 螢光漂白(optical bleaching). 乾燥(drying)$\rightarrow$((17) Mercerizing.水洗.乾燥$\rightarrow$((18) 染色(dyeing).捺染(printing).水洗.乾燥$\rightarrow$((19) 樹脂液 padding 및 豫備乾燥$\rightarrow$((20) Embossing calendering(또는 moire calendering, schreiner miendering)$\rightarrow$((21) 熱處理(curing)$\rightarrow$((22) Soaping$\rightarrow$((23) 乾燥$\rightarrow$((24) 給混 (damping)$\rightarrow$((25) 幅내기$\rightarrow$((26) 最終檢布(final inspection)$\rightarrow$((27) 천접기(holding) $\rightarrow$((28) 整布(1필씩 짜르기)$\rightarrow$((29) 천감기(1필씩 또는 1권으로)$\rightarrow$((30) 商標붙이기(marking).包裝(packing).荷造(baling).出荷(forward)

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.552-559
• /
• 2008

Recent days, various inner wears, sheets and interior goods are manufactured using materials dyed with loess emphasizing its improved blood circulation, metabolism, anti-bacterial, deodorizing properties, and far-infrared ray emissions. The purpose of this study is to investigate the effect of chitosan treatment on the dyeing of cotton fabric using loess as colorants. Particle size of loess, the morphology and dyeability(K/S) of chitosan crosslinked cotton fabrics, and washing durability of loess dyed cotton fabric were investigated. In this study, cotton fabrics were treated with a crosslinking agent, epichlorohydrin, in the presence of chitosan to improve the dyeing properties of cotton fabrics with natural dye by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The results obtained were as follows; Mean average diameter of loess was $1.13{\mu}m$. According to various conditions, the optimum dyeing conditions for cotton fabrics pretreated by 1% chitosan treatment was where 10%(owb) of loess was applied at $90^{\circ}C$ for 120minutes, while for cotton fabrics without chitosan treatment was where 15%(owb) of loess was applied at $90^{\circ}C$ for 150minutes. Overall, K/S value of loess dyed cotton fabric pretreated with 1% chitosan was higher than that of cotton fabrics without chitosan treatment. The Color fastness, washing fastness and light fastness of loess were excellent as 4-5grade.

• 한국의류학회지
• /
• 제35권12호
• /
• pp.1477-1485
• /
• 2011

Dyeability and colorfastness of the blended knits of cotton/rayon (40/60; C/R) and wool/tencel (10/90; W/T) are examined using the natural dyestuff ($Pinux^{TM}$) manufactured from Pinus radiata pine bark extract. In addition, pre-treatments (such as bleaching, mercerization and cationization) are performed to improve dyeability and colorfastness. The $Pinux^{TM}$ powder dyestuffs produced by Pinux Co., Ltd. are used as dyestuffs and their properties are examined for dyeing concentration (0.5-2% (owb)), dyeing time (30-120 minutes) and dyeing temperature (30-$90^{\circ}C$). Dyeability is evaluated with K/S value at 400nm, which is the maximum absorption wavelength for $Pinux^{TM}$. The results show the dyeability of W/T sample containing protein fiber with $Pinux^{TM}$ is superior to all cellulose fiber C/R. A concentration of dyestuff greater than 1.5% (owb), dyeing time 120 minutes and dyeing temperature of $90^{\circ}C$ are the most optimized conditions. It shows that the dyeability of C/R and W/T samples are high in the condition of an acid-dyeing bath and that dyeability highly declined in alkaline bath due to the instability of the proanthocyanidin pigment. After analyzing the effect of bleaching, mercerizing and cationizing (as pre-treatments on dyeability) it was concluded that the dyeability of the C/R sample was enhanced by mercerization but no significant effect by cationization. However, the simultaneous treatment of cationizing and dyeing resulted in far improved dyeability compared to dyeing after cationizing pre-treatment. As for the W/T sample, the effect of cationization was more prominent than the C/R sample. Colorfastness to color changes in the control W/T sample was higher than that of C/R's level 1-2, and it increased to Level 2 when bleaching pre-treatment was given and when a simultaneous cationizing treatment was adopted to the dyeing process. Colorfastness to light in W/T control sample resulted in Level 3 and further increased to an excellent Level of 4 with bleaching and simultaneous cationizing during dyeing process.