• Journal of the Korean Wood Science and Technology
• /
• 제2권1호
• /
• pp.3-18
• /
• 1974

The exports of plywood are increasing annually and it has ranked first in the world market because of the high quality product and manufactured using mordern techniques. However, it is known that the exports of the other wood products, except plywood, is inactive because of their low quality. Accordingly, to increase the exports of various wood products investigations were carried out on kiln drying techniques to improve the quality of the wood. Wet wood should be kiln dried before use to prevent various drying defects such as distortion, shrinkage etc., which would develop after processing,:and also wet wood is not suitable for cutting, gluing and finishing. Therefore, the kiln drying properties of lumber from such species as oak, ramin and meranti which are used in large quantity for manufacturing exporting wood products have been studied. The results of the research are summarized as follows. (1) The end checks and the time for drying from initial moisture content of about 40 percent to 5 percent moisture content in ovendry were investigated as follows: (2) The kiln dried results, for 30mm stock, which are presented by using kiln schedule table 3 are as follows: (3) The kiln schedules for ramin, meranti and oak are given respectively as follows: Ramin kiln schedule: Table 17 and Table 18. Meranti schedule : Table 12. Oak schedule : Table 15.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.369-381
• /
• 2017

The objective of this study was to compare the wood anatomical characteristics of local tree species in Moluccas, Indonesia i.e., Moluccan ironwood (Intsia bijuga), linggua (Pterocarpus indicus), red meranti (Shorea parvifolia), and gofasa (Vitex cofassus). Qualitative evaluation was conducted by observing the anatomical structure in cross, radial, and tangential sections of each sample. For the quantitative evaluation, the dimensions of vessels, rays, and fibers were measured. Qualitative evaluation showed that crystals were observed in Moluccan ironwood, linggua, and gofasa, while resin canals were only observed in red meranti. Tyloses were frequently observed in gofasa but infrequently observed in linggua and red meranti. Quantitative evaluation showed that Moluccan ironwood with the higher density had thicker fiber wall, higher quantity of ray number, and wider rays than the other species. Red meranti had higher values of ray height and fiber length than the other three species. The results also revealed that linggua showed the highest values of relative crystallinity and crystallite width. Red meranti and gofasa showed similar values of relative crystallinity and crystallite width, while Moluccan ironwood showed the lowest values. The basic qualitative and quantitative anatomical characteristics discussed could provide useful information for further utilizations of such wood species.

• 한국가구학회지
• /
• 제23권3호
• /
• pp.298-304
• /
• 2012

Since 1990's, a flooring based on plywood has gotten customers' demand. Costs of raw material and production increased because of changed environment of industry. Tropical timber such as Red Meranti (Shorea acuminate) used for raw material of the floor has been depleting beside countries in South Eastern Asia changed species of afforestation. As a result, it gets hard to secure good quality of raw material for plywood. Moreover plywood price is increased suddenly after earthquake in Japan. Eucalyptus (Eucalyptus globulus) in china has been using for raw material as a countermeasure of changed environment of industry. In this study, possibility of using flooring consisted of Eucalyptus veneer as a core layer was checked by heat transfer experiments. Flooring consisted of Red Meranti was used for comparison. Two factors which impact on heat transfer are a type of density gradient and density difference between Long-grain veneer and Short-grain veneer. Red Meranti samples are 'M' type of density gradient on the other hand Eucalyptus samples are 'W' type of density gradient.

• Journal of the Korean Wood Science and Technology
• /
• 제19권2호
• /
• pp.30-39
• /
• 1991

Internal moisture gradients of 3cm-thick radiata pine (Pinus radiata) sapwood and meranti(Shorea spp.) heartwood were determined by using slicing method during drying and were predicted by Hart's Sorption Simulation. The shapes of internal moisture gradients. moisture contents and drying rates, which were obtained by the slicing method. were compared with those predicted by Sorption Simulation. After the 2nd fitting attempts. the differences between the gravimetric drying rates and the drying rates predicted by Sorption Simulation were less than 0.021%/hr for radiata pine and 0.043%/hr for meranti. The shapes of the internal moisture gradients predicted by Sorption Simulation were in good agreement with those obtained by the slicing method. It could be concluded that Sorption Simulation be an excellent tool to predict internal moisture gradients of wood.

• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.157-174
• /
• 2024

This study investigates the influence of varying concentrations of boric acid (BA) preservative on the physical and mechanical properties of light red meranti (LRM) found in Sarawak. LRM or Shorea leprosula samples were treated with various concentrations of BA via the dip diffusion method using American Society for Testing and Materials (ASTM) standards. The physical property, particularly the retention rate and mechanical properties, bending strength, modulus of elasticity (MOE), tensile and compression strength parallel to grain of impregnated and control samples were tested to determine the effects of BA preservative. The retention rate was found to increase with increasing BA concentration and higher surface area to volume ratio. The mechanical properties in terms of the MOE and tensile strength parallel to grain were found to be greater than those of the control samples, whereas the bending strength and tensile strength parallel to grain were lower. Amongst the results, only the retention rate and MOE showed significant interaction effects at 5% level of significance between all factors tested (samples size and BA concentration for retention rate and BA concentration for MOE).

• Journal of the Korean Wood Science and Technology
• /
• 제41권1호
• /
• pp.42-50
• /
• 2013

1980년대 중반 이후 국내 생산이 시작된 온돌마루(이하 합판마루)는 종전의 주택용 바닥재(PVC 바닥재)의 대체재로서 일반 소비자들의 폭발적인 수요를 얻어왔다. 그러나 최근 마루판 산업은 건축경기 악화 및 산업 환경의 변화로 인한 수요의 감소와 그에 따른 생산율의 저하 등의 근본적인 문제점이 있다. 최근 마루판용 합판의 원재료로 주로 사용된 동남아산 수종의 고갈 및 변화로 인한 양질의 합판원재료 확보가 어려워졌다. 이에 대한 대응책으로 중국산 유칼립투스를 원재료로 부분적으로 이용한 마루판용 합판의 대체이용이 시도되고 있다. 본 연구에서는 유칼립투스 단판을 부심판으로 제조한 복합합판의 마루판용 합판의 원재료로서의 사용 가능성을 실험을 통해 비교분석하였으며, 모든 단판이 동남아산 Meranti로 구성된 합판을 대조군으로 설정했다. 변형에 영향을 미치는 인자로 단판 간 밀도차이와 합판의 밀도경사를 이용하였다. 본 연구의 실험결과는 다음과 같다. 1) 남양재 시험편은 병판의 밀도가 다른 단판의 밀도보다 큰 M자형의 밀도경사, 유칼립투스 시험편은 반대성향의 W자형의 밀도경사를 나타내었다. 2) 종류에 따른 마루판의 변형은 마루 가공 시험편이 합판상태로 가공을 한 경우보다 최소 0.1~최대 6.25 mm 적게 나타났으며, Density Profile 측정 결과 단판 간의 밀도차가 클수록 변형이 많이 발생하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제17권2호
• /
• pp.26-33
• /
• 1989

The acoustic absorption coefficient and acoustic impedance of 5 species of softwood(sonamoo, sam namoo, gusang namoo, hwaback, sitka spruce) and 5 species of hardwood (Mulgusul namoo, Italian popular, white meranti, red meranti, kalantas) were measured by the standing wave method. which is simple in the setup and gives more accurate result than does any other measuring method. The dependence of the absorption coefficient and complex acoustic impedance on the wood sections. thickness of the sample itself and the back air gap was investigated experimentally in the frequency range from 200Hz to 1800Hz, and the result are as follows: 1. The acoustic absorption coefficient of wood sections was higher on the cross section than radial and tangential sections. 2) The acoustic absorption coefficient were higher in the frequency range from 400Hz to 600Hz, but decreased in the frequency above 600Hz. 3. The genenal tendency of the variation of the normal acoustic impedance was increased according to the frequency. 4. The acoustic absortion coefficient was increased in the to 7mm-thick sample and decreased in 9mm-thick sample. 5. The higher acoustic absorption coefficient was shown in the case with the backing an gap than in the case without the gap.

• 한국산림과학회지
• /
• 제78권4호
• /
• pp.419-424
• /
• 1989

내화제간(耐火劑間)의 상대적(相對的)인 내화효과(耐火效果)를 비교(比較), 검토(檢討)하여 보기 위하여 메란티(meranti) 합판(合板)에 5종(種)의 내화제(耐火劑)와 수처리(水處理)를 하고 열판건조(熱板乾燥)시킨 다음, ASTM D 2863-77의 산소지수법(酸素指數法)에 의거하여 Up and Down법(法)을 통하여 각각의 산소지수(酸素指數)를 구하였다. 시험결과(試驗結果)에 의하면 황산(黃酸)암모늄이 28.4, 제(第)1인산(燐酸)암모늄이 26.7, 제(第)2인산(燐酸)암모늄이 43.4, 붕사(硼砂)-붕산(硼酸)이 30.1, 미날리스가 32.4, 그리고 수처리(水處理)가 25.5의 산소지수(酸素指數)를 나타냈는데, 연소성(燃燒性)이 큰 물질(物質)일수록 낮은 산소지수(散素指數)를 지닌다는 사실(事實)로 미루어 볼 때 내화제간(耐火劑間)의 내화효과(耐火效果)는 제(第)2인산(燐酸)암모늄, 미날리스, 붕사(硼砂)-붕산(硼酸), 황산(黃酸)암모늄, 제(第)1인산(燐酸)암모늄의 순(順)으로 크다는 것을 구명할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제2권2호
• /
• pp.22-24
• /
• 1974

1. 연구의 목적 및 중요성. 우리나라 합판 공업은 우수한 제조 기술을 개발하므로서 합판 수출액은 매년 증가하여 드디어 세계 제1위의 합판수출국으로 등장하게 되었으나, 합판 이외의 각종 목재가공품의 수출은 극히 부진한 실정에 있음은 주로 목재가공기술 부족에 기인하는 것으로 분석되고 있다. 따라서 본 연주에 있어서는 수출용 목재 제품의 품질을 개선하므로서 수출 증대 촉진하기 위하여 목재 가공상 가장 기초적 부문에 속하는 목재 건조법을 규명한 것이다. 2. 연구의 내용 및 범위 습재(wet wood)를 사용하면 가공후 건조 수축하여 변형하고 또는 절삭(切削), 접착 및 도장(塗裝) 등에 있어서 각종의 피해를 유발하므로 이들의 피해를 방지하기 위하여 습재를 사용전에 반드시 건조하여야 한다. 따라서 수출용재로 그 사용량이 많은 감나무, 참나무, 라왕 및 라민등에 대한 건조법 및 그 건조결함을 규명하는 동시에, 우리나라의 목재건조공업 실태도 아울러 조사하였다. 3. 연구 결과 및 활용에 대한 건의 3.1 연구 결과 3.1.1 $100^{\circ}C$ ovendry에 있어시 목구활열형성 및 함수율 5%까지 건조하는데 소요되는 시간은 표 1과 같다. 3.1.2 두께 30mm 공시목을 표 2의 건조스케줄을 적용하여 건조한 결과는 표 3과 같다. 3.1.3 감나무 건조 스케줄은, 건조 특성이 정상인 공시목에 대하여는 표4 스케줄이 적합하고 활열성이 강한 것은 상온 아래 그 관계습도를 85% 이상으로 유지하면서 서서히 기건하여 그 함수율을 25%까지 감소한 후 인공건조하는 것이 안전하다. 3.1.4 각 수종에 대하여 규면된 건조 스케줄은 다음과 같다. 라만 건조 스케줄 표 5 및 표 6 라왕(메란티) 표 7 참나무 표 8. 3.2 활용에 대한 검의 본 연구 결과는 목재가공 관계업체에 널리 보급하여, 목재건조기술 개선 특히 건조결함 방지와 건조 시간 단축에 활용되기를 바란다.

• 한국균학회지
• /
• 제21권3호
• /
• pp.212-216
• /
• 1993

팽나무버섯 재배에 있어서 각종 임산 및 농산폐기물을 기질로 사용한 결과, 나왕, 미송, 혼합톱밥, 커피박 및 땅콩박 중에서 커피박이 가장 자실체 생산이 양호하였으며 영양첨가제로 사용된 미강, 맥주박, 옥수수박, 대두박 및 채종박 중에서는 옥수수박에서 자실체 생산량이 높았다. 커피박과 옥수수박의 4 : 1 혼합비에서 자실체 생산이 129.38 g/bottle로 최대를 나타내었다.