• Membrane Journal
• /
• 제7권4호
• /
• pp.175-182
• /
• 1997

Membrane-bioreactor process which combines anaerobic-aerobic bioreactor and membrane process, was used to remove refractory organic susbstances and dye molecule in textile wastewater effectively. Direct feeding of raw feed water to membrane process caused serious fouling on membrane. On the other hand, pretreated feed by bioreactor before the membrane process remarkably reduced the fouling and prolonged the membrane life. Removal efficiency and fouling were more dependent on the material property of the membrane rather than the membrane pore size and structure. Operation mode of hollow fiber membrane module and linear velocity in the hollow fiber influenced the ramoval efficiency and the water flux of the membrane. The combined membrane- bioreactor process was more effective in treating the textile wastewater than each single process.

• Journal of the Semiconductor & Display Technology
• /
• 제2권4호
• /
• pp.37-40
• /
• 2003

We have studied micro-machining technologies to fabricate parts and sensors used in the semiconductor equipment. The studies were based on the silicon integrated circuit processes, and composed of the anisotropic etching of single crystal silicon to fabricate a membrane structure for hot and cold junctions in the infrared absorber. KOH and TMAH were used as etching solutions for the anisotropic wet etching for membrane structure formation. The etching characteristic was observed for the each solution, and etching rate was measured depending upon the temperature and concentration of the etching solution. The different characteristics were observed according to pattern directions and etchant concentration. The pattern was made to incline $45^{\circ}$ on the primary flat, and optimum etching property was obtained in the case of 30 wt% and $90^{\circ}C$ of KOH etching solution for the formation of the membrane structure.

• Macromolecular Research
• /
• 제14권4호
• /
• pp.449-455
• /
• 2006

Ionic cluster mimic, polymer electrolyte membranes were prepared using polymer composites of crosslinked poly(vinyl alcohol) (PVA) with sulfated-${\beta}$-cyclodextrins (${\beta}-CDSO_3H$) or phosphated-${\beta}$-cyclodextrins (${\beta}-CDPO(OH)_2$). When Nafion, developed for a fuel cell using low temperature, polymer electrolyte membranes, is used in a direct methanol fuel cell, it has a methanol crossover problem. The ionic inverted micellar structure formed by micro-segregation in Nafion, known as ionic cluster, is distorted in methanol aqueous solution, resulting in the significant transport of methanol through the membrane. While the ionic structure formed by the ionic sites in either ${\beta}-CDSO_3H$ or ${\beta}-CDPO(OH)_2$ in this composite membrane is maintained in methanol solution, it is expected to reduce methanol transport. Proton conductivity was found to increase in PVA membranes upon addition of ionized cyclodextrins. Methanol permeability through the PVA composite membrane containing cyclodextrins was lower than that of Nafion. It is thus concluded that the structure and fixation of ionic clusters are significant barriers to methanol crossover in direct methanol fuel cells.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1120-1126
• /
• 2013

The syndecan family consists of four transmembrane heparan sulfate proteoglycans present in most cell types and each syndecan shares a common structure containing a heparan sulfate modified extracellular domain, a single transmembrane domain and a C-terminal cytoplasmic domain. To get a better understanding of the mechanism and function of syndecan-4 which is one of the syndecan family, it is crucial to investigate its three-dimensional structure. Unfortunately, it is difficult to prepare the peptide because it is membrane-bound protein that transverses the lipid bilayer of the cell membrane. Here, we optimize the expression, purification, and characterization of transmembrane, cytoplasmic and short extracellular domains of syndecan4 (syndecan-4 eTC). Syndecan-4 eTC was successfully obtained with high purity and yield from the M9 medium. The structural information of syndecan-4 eTC was investigated by MALDI-TOF mass (MS) spectrometry, circular dichroism (CD) spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. It was confirmed that syndecan-4 eTC had an ${\alpha}$-helical multimeric structure like transmembrane domain of syndecan-4 (syndecan-4 TM) in membrane environments.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 한국미생물학회 2001년도 추계학술대회
• /
• pp.97-101
• /
• 2001

The fusion between viral envelope and target cell membrane is a central step of viral infection, and the fusion proteins located at viral envelope mediate such process. Gp41 of HIV is one of the fusion proteins whose structure and mechanism of membrane fusion had been extensively studied. Functionally important motives of gp41 are the N-terminus fusion peptide, the coiled-coil and the membrane proximal C-peptide regions. The role of these regions during the fusion process had been thoroughly examined. Specially, insertion of the fusion peptide into membrane and conformational change of the coiled-coil and C-peptide regions are assumed to be critical for the fusion mechanism. In addition, the coiled-coil region has been shown to interact with membrane, and the C-peptide region regulates the interaction in a dose dependent manner. Furthermore, fusion defective mutations of the coiled-coil region dramatically changed its binding affinity to membrane. These results suggested that the membrane binding property of the coiled-coil region is important for the fusion activity of gp41, and such property could be modulated by the interaction with the C-peptide region.

• Journal of environmental and Sanitary engineering
• /
• 제12권1호
• /
• pp.77-83
• /
• 1997

An experimental research was conducted in order to study the treatment of waste reuse system using the membrane. Cell tester which supplied by Amicon was used to compare the fluxes of various membranes. Specially investigated items in the experiment were carried out by using 5 species of microfiltration membranes as to various MLSS concentrations. From the results, it is recognized from the cell test that 0.2 $\mu $m pore-sized membrane have the most effective performance at 2000mg/L of MLSS, and physical properties of membranes such as strength, deflection, elongation, structure of pore are more important than chemical properties in microfiltration membrane.

• Proceedings of the Membrane Society of Korea Conference
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.53-55
• /
• 1998

1. INTRODUCTION : Since the knowledge of vitrification phenomena can lead to a better understanding of the mechanism of membrane formation, it is desirable to include vitrification line into the phase diagrams. While the final morphology obtained during phase inversion depends upon the kinetics as well as the thermodynamics of the phase separation, the equilibrium phase diagram and vitrification line for amorphous polymers are still a good tool for controlling the morphology and interpreting the membrane structure.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제5권1호
• /
• pp.14-21
• /
• 2002

In the present paper, the hydrodynamic properties of a Rahmen-type, flexible, porous breakwater interacting with obliquely or normal- incident small amplitude waves are numerically investigated. This system is composed of dual vertical porous membranes, hinged at the side edges of a submerged horizontal membrane. The dual vertical membranes are extended downward and hinged at seabed. The effects of permeability, Rahmen-type membrane breakwater geometry, pre-tensions on membranes, relative dimensionless wave number, and incident wave headings are thoroughly examined.

• Bulletin of the Korean Chemical Society
• /
• 제16권1호
• /
• pp.33-36
• /
• 1995

Macrocyclic ligands have been studied as cation carriers in a supported liquid membrane system. Cd2+ has been transported using nitrogen substituted macrocycles as carriers and several divalent metal ions (M2+=Zn, Co, Ni, Cu, Pb, Mg, Ca, and Sr) have been transported using DBN3O2, DBN2O2and PolyNtnoen as carriers in a supported liquid membrane system. Competitive Cd2+-M2+ transport studies have also been carried out with the same system. Ligand structure, stability constant, membrane solvent and carrier concentration are also important parameters in the transport of metal ions.

• Journal of Veterinary Clinics
• /
• 제21권2호
• /
• pp.97-101
• /
• 2004

This study was aimed for ultrasonographic assessment of the tympanic membrane and the tympanic bulla in five healthy Beagle dogs. To improve an ultrasonographic image, the ear canal was filled with warm saline, and an 11 MHz linear probe and a 6.5 MHz convex probe were used. The structures of ear component such as ear canal, ear cartilage and tympanic membrane were easily identified. Especially, tympanic membrane was presented as a reflaction surface which was resulted from the different acoustic impedence between the fluid-filled anechoic ear canal and the gas-filled hyperechoic tympanic cavity in normal dogs. In five left-side ears, the saline was infused into the external ear canal after the tympanic membrane had been ruptured experimentally. Both anechoic fluid-filled ear canal and tympanic cavity were clearly identified. In five right-side ears, the surgically fluid-filled tympanic cavity was imaged as a hypoechoic oval shaped structure. When tympanic cavity and ear canal have been contained with fluid, it was difficult to identify whether the tympanic membrane was ruptured or not. For assessment of the ear structure with ultrasonography, the 11 MHz linear probe was considered as an optimal equipment for a serial assessment of ear canal, tympanic membrane and tympanic bulla whereas the 6.5 MHz convex probe was suitable to assess the tympanic cavity. The results suggest that ultrasonography with saline infusion into the ear canal can be used to find the intactness of the tympanic membrane and to assess the fluid- filld tympanic bulla.