• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• The Korean Journal of Physiology
• /
• 제28권2호
• /
• pp.215-224
• /
• 1994

The presence of a calcium current $(i_{Ca^{2+}})$ passed via a specific channel was examined in the unfertilized hamster egg using the whole-cell voltage clamp technique. Pure inward current was isolated using a $Ca^{2+}-rich$ pipette solution containing 10 mM TEA. This current was independent of external $Na^+$ and was highly sensitive to the $Ca^{2+}$ concentration in the bathing solution, indicating that the inward current is carried by $Ca^{2+}$. The maximal amplitude was $-4.12{\pm}0.58nA\;(n=12)$ with 10mM $Ca^{2+}$ at -3OmV from a holding potential of -8OmV. This current reached its maximum within 20ms beyond -3OmV and decayed rapidly with an inactivation time constant $({\tau})$ of 15ms. Activation and inactivation of this $i_{Ca^{2+}}$ was steeply dependent on the membrane potential. The $i_{Ca^{2+}}$ began to activate at the lower voltage of -55 mV and reached its peak at -35 mV, being completely inactivated at potentials more positive than -40 mV. These result suggest that $i_{Ca^{2+}}$ in hamster eggs passes through channels with electrical properties similar to low voltage-activated T-type channels. Other results from the present study support this suggestion; First, the inhibitory effect of $Ni^{2+}\;(IC_{50}=13.7\;{\mu}M)$ was more potent than $Cd^{2+}\;(IC_{50}=123\;{\mu}M)$. Second, $Ba^{2+}$ conductance was equal to or below that of $Ca^{2+}$. Third, $i_{Ca^{2+}}$ in hamster eggs was relatively insensitive to nifedipine $(IC_{50}=96.6\;{\mu}M)$, known to be a specific t-type blocker. The physiological role of $i_{Ca^{2+}}$ in the unfertilized hamster eggs remains unclear. Analysis from steady-state inactivation activation curves reveals that only a small amount of this current will pass in the voltage range $(-70{\sim}-30\;mV)$ which partially overlaps with the resting membrane potential. This current has the property that it can be easily activated by a weak depolarization, thus it may trigger a certain kind of a intracellular event following fertilization which may cause oscillations in the membrane potential.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.87-95
• /
• 2018

PURPOSES : A geo-grid pavement, e.g., a stress-absorbing membrane interlayer (SAMI), can be applied to an asphalt-overlay method on the existing surface-pavement layer for pavement maintenance related to reflection cracking. Reflection cracking can occur when a crack in the existing surface layer influences the overlay pavement. It can reduce the pavement life cycle and adversely affect traffic safety. Moreover, a failed overlay can reduce the economic value. In this regard, the objective of this study is to evaluate the bonding properties between the rigid pavement and a SAMI by using the direct shear test and the pull-off test. The predicted fractural energy functions with the shear stress were determined from a numerical analysis of the moving average method and the polynomial regression method. METHODS : In this research, the shear and pull-off tests were performed to evaluate the properties of mixtures constructed using no interlayer, a tack-coat, and SAMI with fabric and without fabric. The lower mixture parts (describing the existing pavement) were mixed using the 25-40-8 joint cement-concrete standard. The overlay layer was constructed especially using polymer-modified stone mastic asphalt (SMA) pavement. It was composed of an SMA aggregate gradation and applied as the modified agent. The sixth polynomial regression equation and the general moving average method were utilized to estimate the interlayer shear strength. These numerical analysis methods were also used to determine the predictive models for estimating the fracture energy. RESULTS : From the direct shear test and the pull-off test results, the mixture bonded using the tack-coat (applied as the interlayer between the overlay layer and the jointed cement concrete) had the strongest shear resistance and bonding strength. In contrast, the SAMI pavement without fiber has a strong need for fractural energy at failure. CONCLUSIONS : The effects of site-reflection cracking can be determined using the same tests on cored specimens. Further, an empirical-mechanical finite-element method (FEM) must be done to understand the appropriate SAMI application. In this regard, the FEM application analy pavement-design analysis using thesis and bonding property tests using cored specimens from public roads will be conducted in further research.

• 한국식품영양과학회지
• /
• 제36권10호
• /
• pp.1257-1262
• /
• 2007

혈당강하 효능을 갖는 버섯배양곡물을 개발하기 위하여 수종의 버섯균과 버섯배양곡물의 식후 혈당상승 억제 효과를 조사하였다. 균사체의 포도당 투과지연 효과를 측정한 결과 120분 동안 투석후 전체 포도당 중 $13.1{\pm}3.6{\sim}41.8{\pm}8.0%$의 포도당이 투석막 내액에 잔존하는 것으로 나타나 대부분의 균사체가 pectin보다 포도당의 투석막 밖으로의 투과를 지연시키는 효과가 컸다. 당뇨쥐에 균사체를 투여한 후 혈당변화를 조사한 결과 맥아당 섭취후 30분 경과시 $389.4{\pm}43.8{\sim}426.3{\pm}49.4mg/dL$로 대조구의 $535.3{\pm}78.6mg/dL$에 비해 상당히 낮은 값을 나타내어 버섯균사체의 식후 혈당상승 억제 효과가 우수한 것으로 나타났으며, 특히 Phellinus linteus와 Paecilomyces japonica의 효과가 우수하였다. Paecilomyces japonica를 배양한 버섯배양곡물을 당뇨쥐에 투여한 후 혈당변화를 조사한 결과 버섯 균사를 배양하지 않은 곡물에 비해 현저히 낮은 식후 혈당상승을 나타내어 버섯배양곡물이 우수한 혈당강하 효능을 나타냄을 알 수 있었고 특히 버섯배양 보리의 효과가 큰 것으로 나타났다.

• 멤브레인
• /
• 제19권4호
• /
• pp.261-267
• /
• 2009

폴리이미드는 유리상 고분자로서 높은 화학적 저항성과 열적 안정성을 지니고 있으며, 기계적 물성이 거의 변하지 않는다. 본 연구에서는 황화수소와 메탄의 투과특성을 알아보기 위하여 폴리이미드 중공사막을 건/습식 상전이 공정에 의하여 제조하였고, 제조된 중공사막의 구조 및 실리콘 코팅 전/후의 황화수소와 메탄의 투과특성에 대하여 알아보았다. 압력이 증가함에 따라 황화수소의 투과도는 가소화 현상으로 인해 증가하였고, 황화수소와 메탄의 선택도 역시 증가하는 것으로 나타났다. 실험에 사용된 세 종류의 막 가운데 KSM03b의 투과도와 KSM03d의 선택도가 가장 높은 것으로 나타났다. air gap이 증가 할수록 투과도는 감소하지만 선택도는 증가하였다. 또한 실리콘 코팅 후 투과도는 감소하였지만, 선택도는 증가하였고 7기압에서 KSM03d의 선택도는 275이었다.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1990년도 Proceedings of International Symposium on Korean Ginseng, 1990, Seoul, Korea
• /
• pp.102-110
• /
• 1990

Antitumor polyacetylenlc alcohol, panaxytriol (Ci7 H2603), was isolated and purified from a Powder of the root of Panax ginseng C.A. Meyer. Panaxytriol Possesses unusual Property of being soluble in both water and organic solvents. Panaxytriol inhibited the growth of various kinds of human cultured cell lines in dose-dependent fashion in vitro. The in vivo effects of panaxytriol were tested against C57BU6 mice transplanted with Bl6 melanomas. Panaxytriol (8 and 40 mg/kg) administered intramuscularly (im) produced significant tumor growth delays in mice. Although a detailed mechanism of growth inhibition by panaxytriol is unknown, preliminary results appear to implicate a surface membrane site of action. And its action seems to be more dose-dependent than time-dependent. Finally, panaxytriol pharmacokinetics was evaluated in mice given single 8 mgrkg doses intraperitoneally(ip) or im. Serum panaxytriol content was measured using both tumor growth inhibitory assay and a gas chromatographic method. The maximum serum panaxytriol content after ip and im administration was 35.0 and 1.61 ug/ml respectively. These results indicate that the compound may act as cytotoxic substance even in-patients. Keywords Panax ginseng, panaxytriol, tumor growth inhibition

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.49-56
• /
• 2020

Epoxy/carbon composite was used to prepare a bipolar plate for polymer electrolyte membrane fuel cell (PEMFC). Phenol novolac-type epoxy and diglycidyl ether of bisphenol A (DGEBA)-type epoxy mixture was used as a matrix and graphite powder, carbon fiber (CF) and graphite fiber (GF) were used as carbon materials. In order to improve the mechanical properties of the bipolar plate, surface-modified CF was incorporated into the epoxy/carbon composite. To determine the cure temperature of the epoxy mixture, differential scanning calorimetry (DSC) analysis was performed and the data were introduced to Kissinger equation in order to get reaction activation energy and pre-exponential factor. Tensile and flexural strength was obtained by using universal testing machine (UTM). The surface morphology of the fractured specimen and the interfacial morphology between epoxy matrix and CF or GF were observed by a scanning electron microscopy (SEM).

• Molecules and Cells
• /
• 제38권6호
• /
• pp.518-527
• /
• 2015

Controlled release of medications remains the most convenient way to deliver drugs. In this study, we precipitated gold nanoparticles with quercetin. We loaded gold-quercetin into poly(DL-lactide-co-glycolide) nanoparticles (NQ) and tested the biological activity of NQ on HepG2 hepatocarcinoma cells to acquire the sustained release property. We determined by circular dichroism spectroscopy that NQ effectively caused conformational changes in DNA and modulated different proteins related to epigenetic modifications and c ell cycle control. The mitochondrial membrane potential (MMP), reactive oxygen species (ROS), cell cycle, apoptosis, DNA damage, and caspase 3 activity were analyzed by flow cytometry, and the expression profiles of different anti- and pro-apoptotic as well as epigenetic signals were studied by immunoblotting. A cytotoxicity assay indicated that NQ preferentially killed cancer cells, compared to normal cells. NQ interacted with HepG2 cell DNA and reduced histone deacetylases to control cell proliferation and arrest the cell cycle at the sub-G stage. Activities of cell cycle-related proteins, such as $p21^{WAF}$, cdk1, and pAkt, were modulated. NQ induced apoptosis in HepG2 cells by activating p53-ROS crosstalk and induces epigenetic modifications leading to inhibited proliferation and cell cycle arrest.

• Journal of Ginseng Research
• /
• 제14권2호
• /
• pp.244-252
• /
• 1990

Antitumor polyacetylenic alcohol, panaxytriol (Cl7 H26O3), was isolated and purified from a powder of the root of Pnnnx tin.1.encl C.A. Meyer. Panaxytriol possesses unusual property of being soluble in both water and organic solvents. Panaxytriol inhibited the growth of various kinds of human cultured cell lines in dose-dependent fashion in vitro. The in vivo effects of panaxytriol were tested against C57BL/6 mice transplanted with Bl6 melanomas. Panaxytriol (8 and 40 mg/kg) administered intra-muscularly(im) produced significant tumor growth delays in mice. Although a detailed mechanism of growth inhibition by panaxytriol is unknown, preliminary results appear to implicates a surface membrane site of action. And its action seems to be more dose-dependent than time-dependent. Finally, panaxytriol pharmacokinetics was evaluated in mice given single 8 mg/kg doses intraperitoneally (ip) or im. Serum panaxytriol content was measured using both tumor growth inhibitory assay and a gas chromatographic method. The maximum serum panaxytriol content after ip and im administration was 35.0 and 1.6 $\mu$g/ml respectively. These results indicate that the compound may act as cytotoxic substance even in patients.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2434-2440
• /
• 2018

A new type of piezoelectric micromachined ultrasonic transducer (pMUT) with high resonant frequency was developed by using a thin lead zirconate titanate (PZT) as an insulation layer on a floating $10{\mu}m$ silicon membrane. The PZT insulation layer facilitated acoustic impedance matching at active pMUT, leading to a high performance in the acoustic conversion property compared with the transducer using $SiO_2$ insulation layer. The fabricated ultrasonic devices were wirelessly measured by connecting two identical acoustic transducers to two separate ports in a single network analyzer simultaneously. The acoustic wave emitted from a transducer induced a $3.16{\mu}W$ on the other side of the transducer at a distance of 2 cm. The transducer performances in terms of device diameters, PZT thickness, annealings, and different DC polings, etc. were investigated. COMSOL simulation was also performed to predict the device performances prior to fabrication. Based on the COMSOL simulation, the device was fabricated and the results were compared.