• The Plant Pathology Journal
• /
• 제19권4호
• /
• pp.189-194
• /
• 2003

The effects of prochloraz on membrane permeability and germination of uredospores of Puccinia recondita were investigated to determine its potential mode of action on wheat leaf rust control activity. Disease control activity of ergosterol biosynthesis inhibitors (EBIs) and their activities on uredospore membrane permeability and germination were examined with wheat leaf rust pathogen, both in vitro and in vivo. While wheat leaf rust was not controlled by prochloraz, electrolytic leakage and spore germination of P. recondita uredospore was the highest with the use of prochloraz among the eight fungicides tested. Prochloraz stimulated uredospore of P. recondita to germinate at a higher ratio. Although certain EBIs, such as hexaconazole, showed excellent control activity, their effects on uredospore membrane permeability and germination was much inferior to prochloraz. Therefore, results of this study suggest that effects of EBIs on membrane permeability and germination of uredospore are not always correlated with their disease control activity.

• Archives of Pharmacal Research
• /
• 제16권2호
• /
• pp.147-151
• /
• 1993

In diabetes, the abnormal increase of the membrane cholesterol/phospholipid ratio (C/PL) is consdered to be the main reason for the decreased membrane fluidity, which then results in impaired erythrocyte deformability and subsequent microcirculatory disturbances. In this study, we examined the effects of brazilin on lipid and phosphatidyl fatty acid composition of erythrocyte membranes in streptozotocin induced diabetic rats. Treatment of brazilin (10mg/kg or 100 mg/kg for 2 weeks, i.p) altered and cholesterol contents in diabetic erythrocyte membranes. The C/PL ratio of brazilin treated groups decreased compared with that of diabetic control group while no change was observed in normal erythrocytes. In streptozotocin induced diabetic rats, alterations in phosphatidyl fatty acid compositioin of erythrocyte membranes were observed and brazilin could reverse these alterations. Arachidonic acid level reumed to a normal level while linoleic acid level remained unchanged by the treatment of brazilin. The results suggest that brazilin might increase erythrocyte membrane fluidity which plays a key role inregulating erythrocyte deformability, thereby it could exert positive effects on microdiculatory disturbances.

• Proceedings of the Membrane Society of Korea Conference
• /
• 한국막학회 2000년도 추계 총회 및 국제학술발표회
• /
• pp.50-53
• /
• 2000

• Proceedings of the Membrane Society of Korea Conference
• /
• 한국막학회 2000년도 춘계 총회 및 학술발표회
• /
• pp.55-58
• /
• 2000

• Journal of Korean Society of Water and Wastewater
• /
• 제32권2호
• /
• pp.77-87
• /
• 2018

In this study, the effects of operating conditions on the formation of reversible and irreversible fouling were investigated in the filtration using ceramic membrane for water treatment process. The effect of coagulation pretreatment on fouling formation was also evaluated by comparing the performance of membrane filtration both with and without addition of coagulant. A resistance-in-series-model was applied for the analysis of membrane fouling. Total resistance (RT) and internal fouling resistance (Rf) increased in the membrane filtration process without coagulation as membrane flux and feed water concentrations increased. Internal fouling resistance, which was not recovered by physical cleaning, was more than 70% of the total resistance at the range of the membrane flux more than $5m^3/m^2{\cdot}day$. In the combined process with coagulation, the cake layer resistance (Rc) increased to about 30-80% of total resistance. As the cake layer formed by coagulation floc was easily removed by physical cleaning, the recovery rate by physical cleaning was 54~90%. It was confirmed from the results that the combined process was more efficient to recover the filtration performance by physical cleaning due to higher formation ratio of reversible fouling, resulted in the mitigation of the frequency of chemical cleaning.

• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.481-487
• /
• 2018

Membrane clogging or fouling of the membrane caused by organic, inorganic, and biological on the surface is one of the main obstacles to achieve high flux over a long period of the membrane filtration process. So researchers have been many attempts to reduce membrane fouling and found that there is a close relationship between membrane surface hydrophilicity and membrane fouling, such that the same conditions, a greater hydrophilicity were less prone to fouling. Nanotechnology in the past decade is provided numerous opportunities to examine the effects of metal nanoparticles on the both hydrophilic and antibacterial properties of the membrane. In the present study the improvement of hydrophilic and antimicrobial properties of the membrane was evaluated by adding nanoparticles of titanium dioxide and copper oxide. For this purpose, 4% copper oxide and titanium dioxide nanoparticles with a ratio of 0, 30, 50, and 70% of copper oxide added to the polymeric membrane and compare to the pure polymeric membrane. Comparison experiments were performed on E. coli PTCC1998 in two ways disc and tube and also to evaluate membrane hydrophilic by measuring the contact angle and diameter of pores and analysis point SEM has been made. The results show that the membrane-containing nanoparticle has antibacterial properties and its impact by increasing the percentage of copper oxide nanoparticles increases.

• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.191-199
• /
• 2022

In industrial production, the development of traditional polyamide nanofiltration (NF) membrane was limited due to its poor oxidation resistance, complex preparation process and high cost. In this study, a composite NF membrane with high flux, high separation performance, high oxidation resistance and simple process preparation was prepared by the method of dilute solution dip coating. And the sulfonated polysulfone was used for dip coating. The results indicated that the concentration of glycerin, the pore size of the based membrane, the composition of the coating solution, and the post-treatment process had important effects on the structure and performance of the composite NF membrane. The composite NF membrane prepared without glycerol protecting based membrane had a low flux, when the concentration of glycerin increased from 5% to 15%, the pure water flux of the composite NF membrane increased from 46.4 LMH to 108.2 LMH, and the salt rejection rate did not change much. By optimizing the coating system, the rejection rate of Na₂SO₄ and PEG1000 was higher than 90%, the pure water flux was higher than 40 LMH (60psi), and it can withstand 20,000 ppm.h NaClO solution cleaning. When the post treatment processes was adjusted, the salt rejection rate of NaCl solution (250 ppm) reached 45.5%, and the flux reached 62.2 LMH.

• Journal of Korean Society of Water and Wastewater
• /
• 제10권3호
• /
• pp.92-99
• /
• 1996

The effects of membrane fouling on the water permeability were examined using the hollow fiber microfiltration (HMF)membrane. A membrane module with a pore size of 0.1 micron was submerged in the permeation tank and water bath. The applied pressure was 12.4 kPa for direct solid-liquid separation of activated sludge. As the concentration of MLSS(880~2180mg/l) of the feed solution increased, the decreasing rates of the water flux increased and the membrane was clogged more rapidly. The water flux through the membrane did not increase effectively even with the increase in the applied pressure(40.0~93.3kPa). When the membrane was cleaned with water, the recovery rate of water flux were larger for lower applied pressure. The results indicated that the process of direct solid-liquid separation using HMF membrane was effective at lower pressure.

• Membrane Journal
• /
• 제3권1호
• /
• pp.22-28
• /
• 1993

Fabrics of polyester, polyacrylics, nylon and cotton were tested to investigate the possibility. of using these matehals as a membrane support sheet. Considering the physical properties such as compaction rate, membrane embossing, water flux, the chemical and mechanical properties, 50 denlet polyester fabrics was found to be the appropriate material as a membrane support sheet among the tested materials. The experimental parameters such as pressure drop, compression pressure and viscosity were changed to investigate the effects of these parameters on the flow patten in this membrane support sheet. As a result, it was shown that Darcy's law could be satisfactorily applied to describe the flow pattern in this membrane support sheet.

• Membrane and Water Treatment
• /
• 제1권4호
• /
• pp.273-282
• /
• 2010

Treatment and reuse of industrial wastewater is becoming a major goal due to water scarcity. This may be carried out using membrane separation technology in general and reverse osmosis (RO) in particular. In the current study, polyamide (FT-30) membrane was employed for treatment of wastewater obtained from Faraman industrial zone based in Kermanshah (Iran). The effects of operating conditions such as transmembrane pressure, cross flow velocity, temperature and time on water flux and rejection of impurities including COD by the membrane were elucidated. The aim was an improvement in membrane performance. The results indicate that most of the chemical substances are removed from the wastewater. In particular COD removal was increased from 64 to around 100% as temperature increased from 15 to $45^{\circ}C$. The complete COD removal was obtained at transmembrane pressure of 20 bars and cross flow velocity of 1.5 m/s. The treated wastewater may be reused for various applications including makeup water for cooling towers.