• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.90-94
• /
• 2011

Longitudinal shell member that arranged block unit on 3D-curved surface is performed manual working by designer considering spacing of division characteristic, location and twisting at geometrical 3-dimensional form. Shell expansion drawing that drawn by initial design and shell landing work performed by hull production design have overlap of design work in terms of arrangement of shell longitudinal member. In this study, eliminate design overlap on shell member arrangement that is one of ship longitudinal member. Develop shell member optimization and auto arrangement system.

• 건축역사연구
• /
• 제18권3호
• /
• pp.45-59
• /
• 2009

This thesis mainly deals with what is th Gurodae, recorded of the YeonggeonUigwe and the SanleungUigwe. Gurodae makes diverse appearance In Uigwes.(久老代, 仇老代, 求路代, 仇老臺, 仇露臺, 求露臺, 仇累臺, 九累臺) It seems that Gurdae was an architectural member used on the roof. Especially that was a member of the eaves. Gurodae looks like a Pyeonggodae, located on the end of the rafters. But it differs in the shape compare to that of Pyeonggodae, Gurodae has the shape of combined members, Pyeonggoaed and Chakgo. Chakgo is a member covering the spae, between two Buyeons So Gurodae has the shape of prominence and depression. The result obtained by surveying the Uigwes is the Gurodae is the Gurodae used until 1789. After the publication of HyeonlyungwonUigwe in 1789, that member was no longer existed on the other Uigwes. In 1794, the making Hwaseong fortress, Gurodae divieed into two members, Chopyeonggodae and Chakgo. Since then Chopyeonggodae and Chakgo never combined again.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.395-396
• /
• 2006

To manufacture a flange for a compressor with a relief groove by using powder metallurgy in order to prevent deformation to the compressor in operation, powder material for the flange is charged into a mold; an ablative member having a melting point lower than that of the powder material is positioned at a place where a relief groove is to be formed; the flange is formed by compressing the powder material and the ablative member; and the formed flange is sintered at a temperature between the melting point of the powder material and the ablative member so as to melt and remove the ablative member. It made according to the new method has more excellent strength and airtight property than the conventional one. It is analyzed that the ablative member is melted and penetrated into the flange structure during the sintering process, which results in improvement of the airtight property and increase of the strength.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.275-285
• /
• 2003

Pinching is an important property of reinforced concrete member which characterizes its cyclic behavior. In the present study, numerical studies were performed to investigate the characteristics and mechanisms of pinching behavior and the energy dissipation capacity of flexure-dominated reinforced concrete members. By analyzing existing experimental studies and numerical results, it was found that energy dissipation capacity of a member is directly related to energy dissipated by re-bars rather than concrete that is a brittle material, and that it is not related to magnitude of axial compressive force applied to the member. Therefore, for a member with specific arrangement and amount of re-bars, the energy dissipation capacity remains uniform regardless of the flexural strength that is changed by the magnitude of axial force applied. Due to the uniformness of energy dissipation capacity pinching appears in axial compression member. The flexural pinching that is not related to shear force becomes conspicuous as the flexural strength increases relatively to the uniform energy dissipation capacity. Based on the findings, a practical method for estimating energy dissipation capacity and damping modification factor was developed and verified with existing experiments.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.155-163
• /
• 2011

The flat type automotive cross members with high strength steel have advantages in light weight and fewer parts compared to the hump type cross members. But the complex part shape of the flat type cross member and the poor formability of high strength steel make it difficult to form the parts without forming defects, such as splits and wrinkles. The purpose of this study is to develop the flat type automotive cross member with high strength steel. For that purpose, drawing processes are evaluated using PAM-$STAMP^{TM}$ and proper draw die and blank designs are proposed. Using the proposed die and blank design, the flat type upper and lower cross member could be formed successfully without forming defects.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.271-295
• /
• 2012

This paper presents the solution scheme of using the continuous formulation of 1-D linear member for the dynamic analysis of structures consisting of axially loaded members. The context describes specific applications of such scheme to the verification of experimental data obtained from field test of bridges carried out by a microwave interferometer system and velocimeters. Attention is focused on analysis outlines that may be applicable to in-situ assessment for cable-stayed bridges. The derivation of the dynamic stiffness matrix of a prismatic member with distributed properties is briefly reviewed. A back calculation formula using frequencies of two arbitrary modes of vibration is next proposed to compute the tension force in cables. Derivation of the proposed formula is based on the formulation of an axially loaded flexural member. The applications of the formulation and the proposed formula are illustrated with a series of realistic examples.

• 한국강구조학회 논문집
• /
• 제15권2호
• /
• pp.159-165
• /
• 2003

단부에 관통 가셋트판이 부착된 강관부재의 좌굴거동은 단부의 형상 및 상태에 따라 구속정도가 상이하게되며 단부요소는 세 장비에 따라 탄성 및 비탄성 거동 특성을 보임에 따라 이론적 좌굴내력을 도출하는 것은 사실상 불가능하다. 본 연구에서는 탄성좌굴의 이론적 접근을 바탕으로 세장비($\lambda$), 강성비($\beta$), 지지길이비(G), 강관크기, 부재의 초기변형 등을 고려하여 비탄성 유한요소 해석을 수행하여 각각의 영향요소가 좌굴하중에 미치는 영향을 살펴보았다. 또한 유한요소 모델링시 세장비($\lambda$), 강성비($\beta$), 지지길이비(G), 강관크기 등의 매개변수 분석을 통하여 강도식을 도출하였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제37권3호
• /
• pp.233-237
• /
• 2010

본 논문에서는 기존 C++ 컴파일러에서 검출하지 못하는 클래스 멤버의 접근성을 위반하는 연산을 정의한다. C++에서는 접근 지정자로 클래스 멤버의 접근성을 선언하도록 하고 있다. 접근 지정자 중에서 private과 protected는 객체 외부에서 접근할 수 없는 멤버 지정을 위해서 사용된다. 그러나 C++ 의 포인터 연산을 이용하면 객체 외부에서 private이나 protected 접근성을 가지는 멤버로 직접 접근 가능하다. 본 논문에서는 멤버 접근성을 위반하는 연산의 원인과 사례를 보이고 이를 정형적으로 정의한다. 본 논문의 공헌은 기존에 다루어지지 않은 문제인 멤버의 접근성을 위반하는 연산을 정의하는 것이다.

• 수산경영론집
• /
• 제41권2호
• /
• pp.1-23
• /
• 2010

This study is to evaluate member fisheries cooperatives' self-effort for managerial improvement qualitatively and quantitatively. The impaired member cooperatives' got grant from National Federations of Fisheries Cooperatives for managerial improvement for 2003~2004 with establishment of MOU. This MOU describes a self-effort of memebr cooperatives' required fulfillment items for managerial improvement. From the various level of analyses, we conclude that per capita total return or ROA has direct and positive effect on the improvement of net capital ratio or profit ratio. However, other MOU items like human resource management or an investment increment did not have a correlation with it. In addition, an aggregate financial indicator, such as ROA, seems to have a positive effect on the improvement of net capital ratio or profit ratio for the group of well restructured member cooperatives, but does not for the bad performance group. This is because the good performance has leads to the improvement of net capital ratio for the well-restructured member cooperatives since there is little chance to have additional weakness. From this study we can check the proper selection of MOU items should be based on the analysis of its effect on the managerial improvement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.751-756
• /
• 2001

Permanent-Form is one of system forms for reducing human labor, work costs, oscillation, noise, construction wastes and so on. Permanent-Form is made from precast method in facilities. and carried in construction site to assemble with no demolding. The biggest expense to produce Permanent-Form is about manufacturing mold. To satisfy various size of building member, the same number of manufacturing mold is needed. In this paper, studied about manufacturing mold module for acquiring economic merit and construction member safety. Permanent-Form is member stress and structural analyzed if temporary equipment were used. The result of this study is below. (1) Column sizes of Permanent-Form are 47 kinds of prototype that based on Modular coordination's basic module. 4 pieces or 6 pieces are composed basically. (2) For beam size modular coordination, standard height and width of beam are 150mm and 100mm. It brings 24 kinds of prototype. 4 pieces or 5 pieces are composed basically. (3) Structural analysis value of modular member is like this Column member shows 9.4 to 85kgf/$cm^{2}$ stress distribution and beam member shows 6.3 to 95kgf/$cm^{2}$ stress distribution. Constructing permanent form could have structural safety with use of temporary equipment