1 |
Y. H. Kim et al., "A Study on the Springback of High-Strength TRIP Steel," Transactions of Materials Processing, Vol. 13, No. 5, pp. 409-414, 2004
DOI
|
2 |
M. G. Lee et al., "Spring-back Evaluation of Automotive Sheets Based on Combined Isotropic- Kinematic Hardening Rule," Transactions of Materials Processing, Vol. 13, No. 1, pp. 15-20, 2004
DOI
|
3 |
W. Y. Yang et al., "Springback Control in the Forming Processes for High-Strength Steel Sheets," Transactions of Materials Processing, Vol. 12, No. 8, pp. 718-723, 2003
DOI
|
4 |
J. H. Song et al., "Study on Design Parameters in a Stamping Process of an Automotive Member with the Simulation-based Approach," Transactions of Materials Processing, Vol. 14, No. 1, pp. 21-28, 2006
DOI
|
5 |
J. H. Song et al., "Stress-Based Springback Reduction of an AHSS Front Side Member," Transactions of Materials Processing, Vol. 15, No. 4, pp. 718-723, 2003
|
6 |
C. H. Cha et al., "A Study on th Forming of Automotive Front Side Member Part with Ultra High Strength Steel of DP980," Transactions of Materials Processing, Vol. 18, No. 1, pp. 39-44, 2009
DOI
|
7 |
C. H. Suh et al., "A Study on the Forming Process of Stair Type Side Sill for Automobile using DP780," Transactions of Materials Processing, Vol. 18, No. 8, pp. 601-606, 2009
DOI
|
8 |
B. G. Kim, I. S. Lee, and Y. T. Keum, "Study on the Springback Reduction of Automotive Advanced High Strength Steel Panel," Transactions of Materials Processing, Vol. 18, No. 6, pp. 488-493, 2009
DOI
|
9 |
S. H. Kim, K. P. Kim and C. I. Park, "Development of the Tube Press Forming Process for the CTBA of the Rear Suspension Assembly," Transactions of Materials Processing, Vol. 17, No. 4, pp. 263-271, 2008
DOI
|
10 |
C. W. Sung and Y. N. Paik, "Hydro-forming and Simulation of Cross Member Parts for Automotive Engine Cradle," Proceedings of the Korean Society of Precision Engineering Conference, pp. 351-352, Oct. 2008
|
11 |
K. J. Kim et al., "Hydroforming Process Design of High-Strength Steel Tube," Proceedings of 2009 Fall Conference of KSTP, pp. 202-205, 2009
|
12 |
Y. B. Park et al., "Design of Automobile Subframe for Applying Welded Blanks Hydroforming," Proceedings of 2001 Fall Conference of KSTP, pp. 35-43, 2001
|
13 |
Solver Reference Manual
|