• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.587-590
• /
• 2013

Solid-liquid equilibria for mixtures composed of n-vinyl-2-pyrrolidone (NVP) and 2-pyrrolidone were measured as a basic study for the melt crystallization process to remove 2-pyrrolidone as impurity included in NVP. A differential scanning calorimeter (DSC) and a crystallizer were used and the experimental results obtained from two methods were similar. The mixture showed a eutectic system which has a single composition at the minimum melting temperature. Calculation results from simple thermodynamic equations were found in general agreements with present data. To determine the growth rate of NVP crystal which is important for the design of crystallization process, thicknesses of the crystal were measured with the time using a layer melt crystallizer. The growth rates increased as cooling temperatures decreased. Heat transfer coefficient correlated from present data was found to successfully describe the crystal growth behavior.

• Journal of the Korean Chemical Society
• /
• v.62 no.3
• /
• pp.243-252
• /
• 2018

In this study, we compared 8th graders' macroscopic and microscopic conceptions related to the properties of substances. A test for the basic particle concept and a test for the macroscopic and microscopic concepts of melting point, solubility, and density were developed and administered to 371 students. Their responses were classified into 4 categories on the bases of their understanding of the macroscopic and microscopic concepts. The proportions and characteristics of each category were also analyzed. The analyses of the results revealed that the students who understood the macroscopic concepts had various misconceptions at the microscopic level. Many students had difficulty in understanding not only microscopic concepts but macroscopic concepts. The microscopic responses of the students who did not understand the macroscopic concepts hardly corresponded with their macroscopic level responses. The students who responded correctly to the test for the basic particle concept also had difficulty in understanding the concept of the properties of substances. When they understood the macroscopic concepts, the proportions of the students who understood the microscopic concepts were high. On the bases of the results, educational implications for effective teaching and learning of concepts related to the properties of substances and for improving the future national curricular are discussed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.40-46
• /
• 2017

Shipping activities have become possible in the Arctic Ocean due to melting ice by global warming. An increasing number of vessels are passing through the Arctic Ocean consequently bringing concerns of ship-iceberg collisions. Thus, most classification societies have implemented regulations to determine requirements for ice strengthening in ship structures. This paper presents the simulation results of an ice-strengthened polar class ship after an iceberg collision. The ice-strengthened polar class ship was created in accordance with the Unified Requirements for a Polar-Ship (IACS URI). An elastic-perfect plastic ice model was adopted for this simulation with a spherical shape. A Tsai-Wu yield surface was also used for the ice model. Collision simulations were conducted under the commercial code LS-DYNA 971. Hull deformations on the ice-strengthened foreship structure and collision interaction forces have been analysed in this paper. A normal-strength ship structure in an iceberg collision was also simulated to present comparison results. Distinct differences in structural strength against ice impact forces were shown between the ice-strengthened and normal-strength ship structures in the simulation results. About 1.8 m depth of hull deformation was found on the normal ship, whereas 1.0 m depth of hull deformation was left on the ice-strengthened polar class ship.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.71-76
• /
• 2004

4,4'-Methylenebis(2-chloroaniline)(MOCA) has been widely used as a crosslinking agent, but classified as a toxic chemical. Thus, its use will be limited in the near future. In this research, polyurethane coating films were prepared using 1,3-propanediolbis(4-aminobenzoate)(PDBA) as an alternative to MOCA. The base part was prepared by melting MOCA or PDBA in polyoxypropylene($M_n$=2000), followed by the addition of the various additives. The NCO-terminated toluene diisocyanate prepolymer was used as a curing agent. The polyurethane coating films were prepared by mixing the base part with the curing agent in an appropriate ratio at room temperature. The polyurethane coatings prepared using PDBA exhibited higher initial viscosity, but much longer pot lift, compared to those prepared using MOCA under the same conditions, due to lower reactivity of PDBA. The tensile strength and tear strength of the coating films were much weaker. However, the pot life, tensile strength, elongation, and tear strength of the coating films, prepared using PDBA in the presence of an increased amount of Pb(II)-octoate, were close to those of the coating films prepared using MOCA. Thus, it was concluded that PDBA can substitute MOCA in the preparation of polyurethane coatings as long as the reactivity of PDBA is enhanced using appropriate amounts of the catalyst or other appropriate catalyst.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.2 s.51
• /
• pp.141-146
• /
• 2005

Unstable cosmetic active ingredients could rapidly break down in chemical and photochemical process. Therefore, it has become a very important issue to encapsulate active ingredient for the stabilization. 7-Dehydrocholesterol (7-DHC), a precursor of vitamin $D_3$, has been shown to increase levels of protein and mRNA for heat shock protein in normal human epidermal keratinocytes. However, topical dermal application of 7-DHC is restricted due to its poor solubility and chemical unstability. In this study, 7-DHC was incorporated into nano-emulsion (NE), solid lipid nano-particle (SLN), and chitosan coated solid lipid nano-particle (CASLN), respectively. In order to prepare NE and SLN dispersion, high-pressure homogenization at temperature above the melting point of lipid was used Hydrogenated lecithin and polysorbate 60 were used as stabilizer for NE and SLN. CASLN was prepared by high speed homogenizing after adding chitosan solution to the SLN dispersion and showed positively charged particle properties. Decomposition rate of 7-DHC in NE, SLN and CASLN was studied as a function of time at different temperature. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies were performed to characterize state of lipid modification. It appeared that CASLN is the most effective to stabilize 7-DHC and may be used for a useful topical dermal delivery system.

• Clean Technology
• /
• v.22 no.4
• /
• pp.286-291
• /
• 2016

In this study we made fuel pellet from miscanthus biomass and investigated changes of physiological characteristics and electricity consumption of pelletizing process in comparison with fuel pellet made of pine sawdust. We also examined combustion characteristics including ash content and clinker forming ratio with fuel pellet made of mixing with micanthus biomass and lime powder. Bulk density of ground-miscanthus and pine sawdust were $158g\;L^{-1}$ and $187g\;L^{-1}$, respectively. Bulk density of ground miscanthus was lower than that of pine sawdust, but increased to $653g\;L^{-1}$ after pelletizing, which was similar to $656g\;L^{-1}$ of pine sawdust pellet. Moisture content in raw miscanthus and ground miscanthus were 17.0% and 11.8%, respectively. Moisture content in ground miscanthus was similar to that of pine saw dust and decreased to 6.73% after pelletizing, which was 7.7% lower than that of pine sawdust pellet. Although $27kWh\;ton^{-1}$ were required for compaction press that was an additional process in miscanthus pelleitizing, total required electricity was $193kWh\;ton^{-1}$ which was similar to $195kWh\;ton^{-1}$ of pine sawdust pellet pelleitizing. Pellet durability and pelletizing ratio of miscanthus were 98.0% and 99.7%, respectively, which were similar to 98.1% and 99.4% of pine sawdust pellet. When lime mixing ratio increased, ash melting degree and clinker forming ratio of miscanthus pellet increased. While higher heating value and clinker forming ratio of miscanthus pellet decreased.

• Clean Technology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.209-216
• /
• 2010

In order to understand the effects of a single or combined treatments of 1-MCP($1{\mu}L/L$) and $CO_2$(100%) on the firmness of melting type peach fruit(cv. Chunjungdo), fruit were harvested at commercial maturity and examined physiological changes including flesh firmness during 10 days of shelf-life. Firmness loss of fruit was delayed by both single and combined treatments of 1-MCP and $CO_2$. The treatment of 1-MCP was more effective than $CO_2$ treatment but no additive effective on firmness retention was found in the combined treatment. The upsurge of ethylene evolution occurred 5 days of shelf-life in air treated control but ethylene evolution gradually increased in fruit treated by 1-MCP and 1-MCP+$CO_2$. The suppression of ethylene evolution seemed stronger in $CO_2$ treatment. The respiration of fruit significantly inhibited up to 10 days except control where climacteric increase of respiration was found at 10 days of shelf-life. A molecular shift of pectic polymers(an increase of chelator soluble pectins and decrease of water soluble pectins) was induced by both 1-MCP and $CO_2$ treatments. An increase of water soluble pectins was coincident with firmness loss. The delay of firmness loss seemed to be associated with the migration of calcium to wall matrix, especially pectins, resulting in the increase of wall bound calcium. The polygalacturonase activity was significantly reduced by 1-MCP alone 1 day after treatment and increased to similar level of activity 5 days after treatment compared to other treatment except air treated control whereas pectin methylesterase activity seemed not to be affected by both 1-MCP and $CO_2$ treatments. Thus, the molecular shift of pectic polymers appeared not to be related with pectin methylesterase. Further study is required to clarify the softening mechanism associated with molecular shift of pectic polymers and the inter- or intra-cellular movement of calcium ions induced by postharvest treatments of 1-MCP and $CO_2$.

• Journal of The Korean Association For Science Education
• /
• v.22 no.2
• /
• pp.215-229
• /
• 2002

This study is to analyze the contents related to 'state of water', 'state change of water', and 'conditions of state change' in K-12 science textbooks. For this, we analyzed textbooks based on the 5th kindergarten curriculum, the 6th elementary school science curriculum and the 6th middle school science curriculum. Findings show that some of the contents are designed well by topical sequencing or by spiral sequencing. But others have some problems based on topical sequencing and spiral sequencing. Generally, the contents are represented in the order of Perception of phenomena with senses level, Macroscopic understanding level, Understanding of scientific term level, Microscopic understanding level by grade. But the state change contents related to solidification and melting, and conditions of state change contents related to heat, temperature, wind, and humidity are not represented in the level of Microscopic understanding. The contents of state change and conditions related to heat and wind are not represented in the level of scientific term also.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.31 no.1
• /
• pp.43-66
• /
• 2020

This study analyzed Korean children's books that include ethnically and racially diverse characters, focusing on representation of ethnic minority and cultural sensitivity. Drawing from fiction recommendations by Happy Morning Reading from 2005 to 2017, only 32 books out of 3,214 books, less than 1%, include people with racially and ethnically diverse background. Among the 32 books, 23 featured educative messages inspired by the belief of social justice; four could be categorized as so-called 'melting pot' books, five depicted stories featuring characters that respect different cultures from their own. The issue tackled in the stories differed with the economical standing of the character's country of origin. When a character or her/his parent is from a developing country, the main issues of the book were racial discrimination, bullying, hostility against foreign-born parents, or harsh experience of migrant workers. On the other hand, when a character or her/his parent is from a developed country, the plots often surround the character's hopes, wishes, or personal worries. Only one book was illustrated by a person with immigration background; the others were all written and illustrated by Koreans with no immigration background.