• 한국식품조리과학회지
• /
• 제11권3호
• /
• pp.233-236
• /
• 1995

This study was carried out to investigate the possibility of improving texture and flavor of Dasik made of pine pollen with waxy rice flour and Angelica gigas leaf powder addition. Pine pollen Dasik was not affected in shape, flavor, texture, taste, melting degree and unpleasant flavor by add of 10％ rice flour. Flavor, texture and melting degree were little bit affected by add of 30％ rice flour but all items got worse with same amount of rice flour addition. Add of Angeleica leaf powder by 10％ improved a little the texture while flavor was decreased.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.171-179
• /
• 1997

During the day time in summer, peak of air conditing load, and electric power management system lies under overloaded condition. The reason is the enlarged peak load value of electric power caused by increased air-cooling load in summer. To prevent load concentration during day time and overloaded condition of power management system, some energy storage methods are suggested. One of these methods is ice storage system. Water has some good properties as P.C.M.(Phase Chang Material) : Its melting point is the range of required operation temperature. It has large specific latent heat and is chemically stable compared to other organic or inorganic substances. It is cheap and easy to treat. This study represents experimental results of heat transfer characteristics of P.C.M. under the outward melting process in a vertical cylinder. We experimented with twelve combinations of conditions, i.e., three different inlet temperatures($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$), two working fluid directions(upward and downward), and two aspect ratios, H/R(4 and 2). At the inlet temperature of $7^{\circ}C$ and $4^{\circ}C$, there was temperature stagnation region where the temperature of P.C.M. remains constant at $4^{\circ}C$ regardless of aspect ratio and direction of working fluid. This temperature stagnation occurs as the water, at its maximum density, flows down to the lower region. The phase change interface formed bell-shaped curve as the melting process continued. With a new set of conditions(4H/R, inlet temperature $4^{\circ}C$ and $1^{\circ}C$, downward/upwerd inlet direction), the movement of phase change interface was faster when the working flued inlet direction was downward. With the same set of conditions, melting rate and total melting energy were larger when the working fluid inlet direction was downward. The results were reversed when the other sets of conditions were applied.

• 태양에너지
• /
• 제16권2호
• /
• pp.113-122
• /
• 1996

본 연구는 수직원통형 빙축열조 내에 상변화물질로서 순수한 물을 $-10^{\circ}C$의 초기 과냉온도로 응고시킨 후, 작동유체의 입구온도를 $7^{\circ}C,\;4^{\circ}C,\;1^{\circ}C$로, 작동유체의 유입방향을 상향과 하향으로 각각 변화시키면서 외향용융시켰을 경우, 시간경과에 따른 축열매질의 온도분포, 상경계면의 형상, 용융율, 용융에너지를 실험적으로 구하여 이를 비교 검토한 것이다. 작동유체의 입구온도가 $7^{\circ}C,\;4^{\circ}C$의 경우에는 작동유체의 유입방향이 상 하향 모두 물의 최대 밀도점인 $4^{\circ}C$ 부근에서 일시적으로 온도가 상승하지 않고 일정 시간동안 정체하는 온도정체구간이 나타났다. 또한, 용융이 진행됨에 따라 물이 축열조의 하부에 적체되고, 이에 따라 하부에서의 용융이 활발히 진행됨으로써 상경계면 형상은 전체적으로 종모양 형태의 곡선을 나타낸다. 작동 유체의 입구온도가 $7^{\circ}C$인 경우, 용융율(Vl/Vtot)과 용융에너지는 작동유체의 유입방향이 상향인 경우가 하향인 경우에서보다 크게 나타난 반면, 작동유체의 입구온도가 $4^{\circ}C,\;1^{\circ}C$인 경우는 $7^{\circ}C$의 경우와는 달리 하향인 경우가 상향인 경우에서보다 큰 것으로 나타났다.

• 한국결정성장학회지
• /
• 제23권3호
• /
• pp.124-128
• /
• 2013

본 연구에서는 안정화제로, 패각으로부터 정제한 CaO를 사용하여 Skull melting법으로 큐빅 지르코니아를 성장시켰다. 꼬막 패각을 HCl을 0.1~1 mol%로 1차 처리한 후 수화반응을 거쳐 최적의 처리시간과 농도를 검토하였다. HCl을 1 mol%의 농도로 처리했을 때 가장 순도가 높았으며 수화반응시 $45^{\circ}C$의 온도로 24시간 동안 반응시킬 때 완전한 $Ca(OH)_2$ 를 얻을 수 있었다. $Ca(OH)_2$를 $1200^{\circ}C$에서 5시간 처리하였을 때 CaO의 순도가 가장 높게 측정되었다. 패각으로부터 얻어진 CaO를 $ZrO_2$에 첨가하여 함량을 10~30 mol% 로 변화시켜 Skull melting법으로 단결정을 성장시켰다. Skull melting법에 사용된 고주파 발진기의 주파수는 약 3.4 MHz이며 단결정의 하강속도는 시간당 3 mm로 4 cm 길이로 성장시켰다. 실험결과 CaO의 함량이 15 mol% 일 때 결정성이 가장 우수했다.

• KIEAE Journal
• /
• 제12권4호
• /
• pp.97-104
• /
• 2012

A phase-change material is a substance with a high heat of fusion which, melting and freezing at a certain temperature, is capable of storing and releasing large amounts of energy. Heat is absorbed or released when the material changes from solid to liquid. Therefore, PCMs are classified as latent heat storage (LHS) units. The purpose of this study is to analyze PCM wallboard design parameters using dynamic energy simulation. Among the factors of PCM, melting temperature, latent heat, phase change range, thermal conductivity are very important element to maximize thermal energy storage. In order to analyze these factors, EnergyPlus which is building energy simulation provided by department of energy from the U.S is used. heat balance algorithm of energy simulation is conduction finite difference and enthalpy-temperature function is used for analyzing latent heat of PCM. The results show that in the case of melting temperature, the thermal energy storage could be improved when the melting temperature is equal to indoor surface temperature. It seems that when the phase change range is wide, PCM can store heat at a wide temperature, but the performance of heat storage is languished.

• 한국결정학회지
• /
• 제3권2호
• /
• pp.85-97
• /
• 1992

EBFZM( Electron Beam Floating Zone Melting) 법을 이용하여 몰리브덴에서의 금속계 불순물과 침입형 불순물의 정련기구 및 단결정 성장기구를 연구하 였다. Fe, Cr, Co등의 금속계 불순물은 몰리브덴과의 평형증기압의 차이에 따른 불순물의 선택적 증발에 의하여 우수한 정련효과를 나타내며, 몰리브덴보다 응점이 높은 Ta, W는 잘 제거되지 않았다. 한편 대역 정제에 의한 정련효과는 미약함을 확인하였다. EBF ZM은 C,0,N등의 침입형 불순물의 정련에도 효과적 이었다. 본 연구의 모든 조건에서 몰리브덴은 단결정으로 성장하였으며 2차 재결정 epitaxy에 의한 단결 정 성장기구가 제시되었다. 몰리브덴 단결정 내의 전 위밀도는 strain-anneal법에 의한 단결정의 경우보다 높았으며,본 실험의 열처리 조건에서는 변화하지 않았다. The purification and single crystal growth mechanisms of molybdenum were analysed in EBFZM ( electron beam floating zone melting). Metallic impurities of Fe, Cr, Co were purified efficiently but Ta and W were not removed well in this study. It was due to a preferential evaporation of the elements caused by the difference in equillibrium vapor pressure between the elements and molybdenum. The pu- rification effect by zone refining was not significant. The EBFZM also refined the interstitial impurities of C, 0 and N, effectively. The single crystals of molybdenum were grown regardless of the experimental conditions and the secondary recrystallization epitaxy was surge sled as a growth mechanism. The dislocation density in single crystal was higher than that by strain-anneal method, and was not reduced by heat treatments.

• 한국결정성장학회지
• /
• 제13권5호
• /
• pp.205-210
• /
• 2003

스컬법에 의해 alexandrite-like cubic zirconia 단결정을 성장 시켰다. 스컬용융시 R.F generator는 35 ㎾, 2 MHz 였다. 단결정들은 전이금속이온인 Pr을 1 또는 1.5 wt%와 Nd를 0.5 또는 l wt%를 함께 첨가하여 성장시켰으며, 성장 후0.25 mm의 slice와 12 mm의 round brilliant cut으로 연마하였다. 연마석은 공기중 또는 질소분위기에서 $1000^{\circ}C$에서 2시간 열처리하였으며 optical absorption spectra($\lambda$ = 400∼700 nm)를 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.221-228
• /
• 2010

A sliding accident on the road have a high percentage by road freezing, especially, it is often appeared at bridges and Tunnel of freezing areas. Thus, the stability of road operations is enhanced by preventing a partial freezing phenomenon. According to the geothermal snow melting system analysis, a pattern of thermal conductivity is found out about pavement materials of concrete and asphalt when it is buried. The thermal conductivity study is essential that be applied the geothermal snow melting system according to heating exchanger pipe laying of lower pavements. The model tests are conducted on low temperature in freezer using the manufactured test model which is equal to pavement materials. And Many variables are discovered from numerical analyzes of the same conditions with model test.

• 한국결정성장학회지
• /
• 제16권4호
• /
• pp.141-148
• /
• 2006

스컬용융법은 생산원가가 낮고 crust의 재사용으로 수율이 좋아 양질의 산화물단결정성장 및 대량생산에 좋은 방법이다. 본 연구에서는 루틸단결정을 스컬용융법에 의해 성장시켰으며, 서로 다른 성장조건에서의 ingot특성을 비교하였다. 좋은 품질의 루틸 ingot 성장을 위한 조건은 직경 12, 높이 14cm 도가니 사용, 3000pF의 tank condenser 용량, 2.84 MHz의 주파수, 9시간의 용액유지시간, 2mm/h의 성장속도였다.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.482-489
• /
• 2008

Ti-Cr alloys consist of BCC solid solution, C36, C14 and C15 Laves phase at high temperature. Among others, the BCC solid solution phase was reported to have a high hydrogen storage capacity. However, activation, wide range of hysteresis at hydrogenation/dehydrogenation, and degradation of hydrogen capacity due to hydriding/dehydriding cycles must be improved for its application. In this study, to improve such problems, we added a Nb. For attaining target materials, Ti-10Cr-xNb(x=1, 3, 5wt.%) specimens were prepared by arc melting. The arc melting process was carried out under argon atmosphere. As-received specimens were characterized using XRD(X-ray diffraction), SEM(Scanning Electron Microscopy) with EDX(Energy Dispersive X-ray) and TG/DSC(Thermo Gravimetric Analysis/Differential Scanning Calorimetry). In order to examine hydrogenation behavior, the PCI(pressure-Composition-Isotherm) was performed at 293, 323, 373 and 423K.