• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.30-33
• /
• 2001

Melting is one of the most effective treatments for stabilizing heavy metals and also creates high value by-products. In this study, authors evaluated the leaching characteristics of heavy metals in melting slag obtained from incinerator ashes. In order to evaluate the environmental compatibility of the recycled melting slag, the samples analysed various leaching tests of heavy metals were raw incinerator ashes, melting slag and the construction materials recycled from melting slag. As the results: (1) The leaching concentrations of tile melting slag were lower than those of the raw incinerator ashes in the experiment performed in accordance with Korea Standard Leaching Test (KSLT). (2) The result of leaching test with the method of RG Min-StB 93. FGSV Forschungsgesellschaft fur Stra $\beta$ en- und Verkehrswesen) met the requirements in German. (3) The compressive strengths of mortar samples used for evaluating the feasibility of recycling the melting slag as construction materials also showed the suitable range for recycling (4) Melting slag was considered the stable materials with respect to the chemical stability against chemical solutions with various pH conditions.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.168-175
• /
• 2007

Ash melting chamber is one of the key facility of the pyrolysis-melting incineration system, and it should be designed and operated very carefully for avoiding solidification of slag. In this study, an example of numerical and experimental scale-up process of the melting chamber, in which high speed air is injected to the molten slag and generates bubbles, which enhances agitation of the slag and char combustion, is presented. Cold flow test, combustion and melting test in a lab-scale (30 kg/hr) chamber and a pilot scale (200 kg/hr) chamber. Minimum energy for maintaining molten slag is derived, and it was found that the molten slag can be maintained efficiently by concentrating heat into the bubbling slag.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.32-37
• /
• 2005

The characteristics of the metal melting and radionuclide distribution of the radioactive has been investigated in a lab-scale arc furnace. The slag former based on the constituents of silica, calcium oxide, aluminum oxide, borate and calcium fluoride additions was used for melting of the stainless and carbon steel. In the melting of the stainless steel, the amount of slag formation increased with an increase of the concentration of the slag former. But the effects of the slag basicity on the amount of stag formation showed a local maximum value of the slag formation with an increase of the basicity index in the melting of the stainless steel as well as in the melting of the carbon steel. With an increase of the amount of slag former addition, the trends of the cobalt distribution into the ingot and the stag depended on the kind of slag former used in the melting of the stainless steel while the effect of the slag basicity on the distribution of the cobalt was not clarified in the melting of carbon steel. Tn the melting of the carbon steel, the strontium was captured at up to $50\%$ into the slag phase. Cesium was completely eliminated from the melt of the stainless steel as well as the carbon steel and distributed to the dust phase.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제6권1호
• /
• pp.23-31
• /
• 2001

용융처리는 중금속을 안정화시키는 효과적인 방법의 하나이며, 또한 고가의 부산물을 생산해낸다. 본 연구에서는 소각재를 용융하여 얻은 슬래그의 중금속 용출특성을 평가하고자 한다. 슬래그를 재활용하는데 있어서 환경적인 적합성을 평가하기 위하여 소각재, 슬래그 및 슬래그를 재활용재로 하여 제조한 건설재료에 대한 용출시험을 수행하였다. 시험결과는 다음과 같다. (1) 국내표준용출시험법(KSLT)에 의해 시험한 슬래그의 중금속 용출농도는 소각재의 용출농도보다 낮은 값을 나타냈다. (2) 장기용출시험법에 의해 평가한 슬래그의 중금속 용출농도도 KSLT의 기준을 만족했다. (3) 슬래그의 건설재료로서의 사용성을 평가하기 위해 만든 모르타르 공시체의 용출결과, 슬래그를 재활용재로서 사용하는데 있어서 중금속 용출 측면에서 적합하다고 사료된다. (4) 독일의 소각재 재활용을 위한 가이드라인인 RG Min-StB 93, FGSV에서 제시하는 방법에 의해 시험한 결과, 본 슬래그의 용출농도는 독일의 규제기준을 만족하였다.

• 상하수도학회지
• /
• 제22권4호
• /
• pp.413-420
• /
• 2008

In order to utilize cinder melting slag as a filter media to control the quality of early rainwater, its environmental stability was verified by heavy metal elution experiment and improved by pre-treatment. Possibilities of improving its function as an absorbent was considered. Absorption characteristics of melting slag before and after the pre-treatment were analyzed by heavy metal equilibrium and stationary-phase column experiments, which in turn were analyzed by comparison experiment with activated carbon. As a result of heavy metal elution experiment, every metal item existed in a much lower amount than the criteria or was not detected, implying that there is no problem recycling it. Absorption equilibrium experiment showed that the time for pre-treatment melting slag to reach the equilibrium was reduced, while the absorbed amount was greatly increased. Stationary-phase column experiment assures us that the elimination rate was not changed much by influx rate, pH and the change in packing volume rate, indicating that this melting slag can be used not only as a filter media to control the quality of early rainwater but also in many areas of water-processing.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.151-155
• /
• 2006

The large amount of energy is consumed in a process for keeping the high temperature melting pool. For this reason, in addition to the wastes input to keep the high temperature melting pool, it is necessary for an auxiliary fuel and LOx to throw into the melting pool. So in this study, using a new melting furnace system, the experiments to keep the melting pool with minimal energy without throwing an auxiliary fuel and LOx was carried out. Also it is hoped that the results of the experiment will be available to analyze keeping a melting pool and behavior in a melting furnace.

• 한국주조공학회지
• /
• 제15권2호
• /
• pp.175-183
• /
• 1995

It is difficult to remove such interstitial impurities as sulfur, oxygen, hydrogen and carbon in Fe-Ni alloys. Thermodynamic and kinetic studies were carried out on the behavior of hydrogen gas, oxygen gas, Si, Al and slag, and the reaction time by the $Ar/Ar-H_2$ plasma and electron beam melting. After the addition of Al, Si, they were melted by Ar plasma with reaction time changed. 80%Ni-Fe alloys showed a better deoxidation than 36%Ni-Fe alloys. At $Ar-H_2$ plasma melting, the deoxidation was significant. In the case of the electron beam melting, the residual oxygen was higher than in Ar plasma melting because electron beam melting temperature was lower than that of Ar plasma. For the decaburization, it was melted by $Ar-O_2$ plasma melting, which could remove effectively carbon by activated oxygen in plasma. We added slag to Fe-Ni alloys for the desulfurization. As the result of this experiments, the amount of residual sulfur was not changed according to the slag ratio and reaction time.

• 대한금속재료학회지
• /
• 제50권10호
• /
• pp.753-761
• /
• 2012

The reduction behavior of low level oxides such as (T.Fe), (MnO) and ($P_2O_5$) in molten EAF slag was investigated using commercial reductants. In an air atmosphere, the slag volume increased and the reduction rate of the slag was very low due to the oxidation loss of reductants by oxygen in the air. The reduction rate of the slag was also low when a commercial reductant was used alone in an Ar gas atmosphere. The reason is probably because the material transfer through the interface between the slag and reductant is difficult due to the formation of high melting point oxide. When reductants were mixed with burnt lime in order to form low melting point reaction products, the reduction rate of the slag increased up to the range of 45-70%. By using the mixtures of reductants and burnt lime so as to form a low melting point slag at the reaction end, the reduction rate of the slag was improved up to 60-85%.

• 방사성폐기물학회지
• /
• 제3권2호
• /
• pp.95-104
• /
• 2005

TRIGA 연구로의 해체 시 발생하는 금속성 폐기물의 용융기술을 확립하기 위한 기초연구로 전기로 내에서 방사성 핵종(Co, Cs, Sr)을 포함한 알루미늄의 용융 시 용융온도, 용융시간 및 플럭스(flux)의 종류가 핵종의 분배 거동에 미치는 영향을 조사하였다. 플럭스의 종류에 따라 다소 차이는 있으나, 플럭스의 첨가로 알루미늄 용융체의 유동성이 증가됨을 확인할 수 있었다 용융 후주괴(ingot) 및 슬래그(slag) 시료의 XRD분석을 통해 핵종이 주괴에서 슬래그 상으로 이동하고 슬래그를 구성하고 있는 산화알루미늄과 결합하여 안정한 화합물을 형성함을 알 수 있었다. 슬래그의 발생량은 용융온도와 용융시간이 증가할수록 증가하는 경향을 보였으며, 증가속도는 플럭스의 종류에 따라 차이를 보였다. 핵종 중 Co는 용융온도가 증가함에 따라 주괴 내 에서는 감소하였으나 슬래그 상에서는 증가하는 경향을 보였으며, 실험조건에 따라 최대 90$\%$까지 주괴에서 슬래그로 이동하였다. 휘발성이 강한 Cs과 Sr은 대부분이 슬래그와 분진으로 이동하여 매우 높은 제염계수를 얻을 수 있었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.167-171
• /
• 2006

The previous models for thermal behavior in the melting furnace were deterministic, composed of such a form that if the initial input conditions are determined, the results would have been come out by using the basic heat equilibrium equations. But making the experiment by trusting the analysis results, the melted slag is fortuitously set often, because temperature variation of the melted slag in the reaction process is not point function but path function. So in this study, a transient model was developed and verified by comparing with the experimental results.