• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.95-108
• /
• 2014

The objective of this study is to develop the plastic greenhouse models which are structurally safe under the weather condition of Seongju and have the dimensions suitable for oriental melon cultivation as well. To grasp the structural features of greenhouses in Seongju, the field survey was conducted on 406 farmhouses which included 2,068 greenhouses. The field survey showed that the roof shape of arch type accounted for the highest rate, but recently even span or peach type became more popular and the width and height of greenhouse tended to increase as the period of use was short. The relationship of the width, ridge height and eaves height were established based on field survey data. Using climate data of Gumi adjacent to Seongju, the regressions were determined for the design wind speed and design snow depth depending on recurrence period. To design the greenhouse models against weather disasters in Seongju, the optimal design loads are 23.7 cm of snow depth and $33.8m{\cdot}s^1$ of wind speed. As the design results, four models of single-span greenhouse, two models of double-span greenhouses including extension were developed.

• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.237-243
• /
• 2001

The experiment was conducted to investigate the effect of different mulching materials on the growth and quality of oriental melon in protected cultivation. Soil temperature, plant growth and fruit quality were affected by different mulching materials, clear polyethylene (P.E.) film (control), clear inset between black P.E. film, green P.E. film. and recycled ethylene vinyl acetate (E.V.A.) film. The highest night soil temperature was at 20 cm depth under green P.E. film, but was at 5 cm depth under other materials. Difference of soil temperature as affected by mulching materials decreased with increasing soil depth. Plant height, number of nodes, leaf area index (LAI), crop growth rate (CGR), and relative growth rate (RGR) at 30 days after transplanting were significantly greater in the recycled E.V.A. film treatment than in the other treatments. Fresh weight of weeds growth under the mulching materials was not affected by mulching material at 30 days after transplanting. However, it was the greatest under clear P.E. film mulching at 90 days after transplanting. Harvesting time of recycled E.V.A. film was 2 days earlier than that of clear P.E. film. Difference in fruit weight and length, and soluble solid content were not affected by the mulching materials. Marketable yield was 2,426 kg.10a$^{-1}$ in recycled E.V.A. film treatment, which was 6% greater than in clear P.E. film treatment.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.15-21
• /
• 2005

This experiment was carried out to investigate the effect of ridge direction (south-north) on temperature and light intensity on early growth of oriental melon under east-west oriented vinyl house cultivation. The air-temperature of minimum between north and south-ridge in the tunnel of vinyl house was $12.5^[\circ}C\;and\;11.3^{\circ}C$ and that of maximum between north and south-ridge was $36.7^{\circ}C\;and\;34.7^{\circ}C$, respectively. The minimum and maximum air-temperature of north-ridge in the tunnel of vinyl house on Feb. 15 were $12^{\circ}C\;and\;2.0^{\circ}C$ higher than those of south-ridge, respectively. The intensity of daylight between south and north-ridge was similar during 9:00-10:30 a.m., that of south-ridge was higher than north-ridge during 10:30-11:30 a.m. and that of north-ridge was higher than south-ridge during 11:30-17:30. The plant growth after 55 days of planting on the north-ridge was prominent cultivation compared to south-ridge. The female flowering and first harvesting day were earlier in north-ridge than in south ridge. The marketable fruits rate and yields (kg/10a) were $6.7\%$ and 218kg higher in north-ridge cultivation than south-ridge, respectively. Differences of marketable fruit rate and yield (kg/10a) in each ridge were significant.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.615-624
• /
• 2020

Background and objective: Urbanization caused a reduction in urban green space and a lack of community spaces. An attempt to solve these problems, urban gardens, have become popular and are currently being implemented in various downtown areas. However, urban gardens have some inadequate aspects from a visual or landscape perspective. The goal of this study was to examine the possibility of an aesthetic and productive garden space by introducing cultivation methods through the planting system design process. Methods: The design process using plants was classified and presented to suggest the importance of the landscape and aesthetic value. An urban garden space was designed according to the perspective of 'production scenery' and 'participation aesthetics'. According to the characteristics of the plant, urban gardens were divided into vertical type (corn, millet, sorghum), climbing type (kidney bean, cucumber, bitter gourd), and runner type (melon, watermelon, peanut). After classifying plants according to the shape of the root, the structure supporting climbing was installed and the crops were cultivated in an upright form with a tunnel. Results: In the designed cultivation, each crop cooperates, without invading each other's space. Compared with the conventional cultivation, there was little difference in production, and management was made more convenient since weed outbreaks were effectively suppressed while runner type crops cover over the land's surface. Since the positions of each crop are clearly distinguished, the aesthetic value is improved by offering a sense of rhythm with a balanced design. Conclusion: The results suggest that the cultivation methods through the plant system design process have aesthetic as well as productive value, and the design using plants, an infinite living resource, could lead to an expansion of the design field. Moreover, it would enable a sustainable symbiosis between industry and environment. There is potential for the design industry to make significant progress through collaboration with agriculture, horticulture, and landscape architecture.

• Journal of Bio-Environment Control
• /
• v.22 no.3
• /
• pp.284-290
• /
• 2013

This study analyzed the geometric, compressive, cutting and friction properties of oriental melons in order to design a gripper capable of soft handling and a cutter for cutting oriental melon vine among the end effector of oriental melon as a preliminary step for developing the end effector of the robot capable of harvesting oriental melons in protected cultivation. As a result, the average length, diameter at the midpoint, weight, volume and roundness of the oriental melons were 108 mm, 70 mm, 188 g, 333 mL and 3.8 mm. Nonlinear regression analysis was performed on the equation $W=L^a{\times}D_2^b$ with variation of the length (L) and diameter (D2) of the weight (W) of the oriental melons. As a result, it was shown that there was a correlation between a of 2.0279 and b of -0.9998 as a constant value. The average diameter of the oriental melon vine was 3.8 mm, and most vines were distributed within a radius of 5 mm from the center. The average yield value, compressive strength and hardness of the oriental melons were $36.5N/cm^2$, $185.7N/cm^2$ and $636.7N/cm^2$, respectively. The average cutting force and shear strength of the oriental melon vines were $2.87{\times}10^{-2}\;N$ and $5.60N/cm^2$, respectively. The maximum friction coefficient of the oriental melons was rubber of 0.609, followed by aluminium of 0.393, stainless steel of 0.177 and teflon of 0.079. It was considered possible to apply it to the size of the gripper and cutter, turning radius, dynamics of drive motor and selection of materials and their quality in light of the position error and safety factor according to the movement when designing end effector based on the analyzed data.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.188-195
• /
• 2021

This study was conducted to investigate the growth and quality characteristics of melon (Cucumis melo L.) cultivars and the irrigation requirements for cultivars. In our previous study in 2019, twelve melon cultivars including 'Dalgona' were examined for their cultivar characteristics under the same irrigation condition for all cultivars, and sorted into several groups based on different growth condition; for the internode length (from 0 to 20th node), leaf area, and fruit weight, 'Kingstar' belonged to the largest group, 'Worldstar' the middle group, and 'Dalgona' the smallest group. After analyzing the results of the previous experiment, 'Dalgona', 'Worldstar', 'Kingstar', and 'Rubyball' were selected as test cultivars for the growth group in 2020, and irrigated according to different irrigation levels for each cultivar. The control of the irrigation volume for each melon cultivar by monitoring the drainage rate during the cultivation periods showed that all four cultivars required a similar amount of irrigation in the 'early growth' stage where crops grew at about the same rate. From 'flowering time', however, the change in irrigation requirements showed a similar tendency for 'Worldstar' and 'Kingstar' and for 'Rubyball' and 'Dalgona' respectively. A sudden change in each irrigation volume was observed from the fruit set; 'Dalgona' began first to decline and 'Rubyball' was second, followed by 'Worldstar' and 'Kingstar'. In conclusion, the irrigation volume was the largest in 'Kingstar', followed by 'Worldstar', 'Rubyball', and 'Dalgona' in the same order as the growing amount of plant length, leaf area, and fruit weight. Therefore, it is necessary to control exactly the irrigation volume by reflecting the unique growth characteristics of each cultivar for the production of high-quality fruit in melon hydroponics, and especially to use great care when different cultivars are cultivated together.

• Journal of Bio-Environment Control
• /
• v.16 no.1
• /
• pp.72-77
• /
• 2007

This study was conducted to investigate the effect of functional cover film on oriental melon fruit quality under unheated plastic greenhouse cultivation in cold period. The 6 kind of films having different characteristics were covered at plastic greenhouses and oriental melon seedlings were cultivated at 2 regions of Seongju, respectively. The air-temperatures in plastic greenhouses of J-1 and J-2, having high infrared absorption rate, were about $2{\sim}5^{\circ}C$ higher than K-3. The contents of ${\beta}-carotene$ and sugar of fruit showed significant difference between functional and normal films. The sucrose, determining a sweetness during maturation, and soluble solids content of fruits cultivated in J-1, J-2, J-3, and K-1 were higher than those of K-2 and K-3. Ascorbic acid of fruits was highest in K-2 having low light transmission rate and thermo-keeping capacity. There was no significant difference in mineral content among all of cover films. These results indicated that the use of functional greenhouse covering films could improve fruit quality such as ${\beta}-carotene$ and sugar content of oriental melon.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2014

Oriental melon (Cucumis melo var. makuwa) should be cultivated on the soil and be harvested. It is difficult to find because it is covered with leaves, and furthermore, it is very hard to grip it due to its climbing stems. This study developed and tested oriental melon harvesting robots such as an end-effector, manipulator and identification device. The end effector is divided into a gripper for harvest and a cutter for stems. In addition, it was designed to control the gripping and cutting forces so that the gripper could move four fingers at the same time and the cutter could move back and forth. The manipulator was designed to realize a 4-axis manipulator structure to combine orthogonal coordinate-type and shuttle-type manipulators with L-R type model to rotate based on the central axis. With regard to the identification device, oriental melon was identified using the primary identification global view camera device and secondary identification local view camera device and selected in the prediction of the sugar content or maturity. As a result of the performance test using this device, the average harvest time was 18.2 sec/ea, average pick-up rate was 91.4%, average damage rate was 8.2% and average sorting rate was 72.6%.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.10a
• /
• pp.77-81
• /
• 1998

참외는 일년생 작물로 손자덩굴에 과실이 착과되며 포복재배를 하고 있어, 덩굴의 과번무로 인한 채광과 통풍불량 및 고온으로 착과와 과실비대가 부진하여 품질이 저하되며 호흡량의 증가로 광합성율의 저하와, 각종 병해충 및 생리장해인 발효과 발생으로 많은 피해를 주고 있는 실정이다. 조 등(1997)은 관행적인 포복재배에 의존하고 있어 단위 면적당 수량 증수는 크게 기대할 수 없다고 하였으며, 최 등(1996)은 지주재배에서 과실의 당도가 높았으며 기형과와 발효과의 감소로 상품과 수량은 증수되었다고 보고하였으며, 함 등(1996)은 줄유인재배는 수량 증수는 가져왔으나 줄유인 및 관리에 많은 노동력이 소요되었다고 하였다. (중략)

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2004.03a
• /
• pp.163-167
• /
• 2004