• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.55-60
• /
• 1988

A two year's field experiment was conducted on newly reclaimed saline tidal lands to measure the effects of sand mulching on salinity of the soils and their relationship to crop performance. Hybrid sorghum cv. Pioneer 931 was grown under different mulching treatments using of medium sand and red earth (Fine loamy, Typic Hapludults). Salinity in the root zone was decreased markedly under soil mulching using of medium sand, especially during the dry season, and it caused a great increase in the root growth and R/T ratio. Seasonal values of electrical conductivity at sand mulching were 6.6 in April and 1.6 mmhos in August, but it was still high with a concentration of 12.7 (April) and 3.8 mmhos (August) in untreated check plot. Sand mulching increased plant growth and the rate of dry matter accumulation. However, treatment of red earth additionally over sand mulching produced lower dry matter yield than those of soil mulching using of medium sand only. Under salt stress sorghum plant showed a decrease in the leaf weight ratio (LWR) and it resulted in a low concentration of crude protein of the plant. Sand mulching enhanced leaf weight ratio and rate of protein synthesis.

• Structural Engineering and Mechanics
• /
• v.64 no.6
• /
• pp.703-721
• /
• 2017

The experimental study of the behavior of dry medium and loose sandy soil under the action of a single impulsive load is carried out. Different falling masses from different heights were conducted using the falling weight deflectometer (FWD) to provide the single pulse energy. The responses of soils were evaluated at different locations (vertically below the impact plate and horizontally away from it). These responses include; displacements, velocities, and accelerations that are developed due to the impact acting at top and different depth ratios within the soil using the falling weight deflectometer (FWD) and accelerometers (ARH-500A Waterproof, and Low capacity Acceleration Transducer) that are embedded in the soil and then recorded using the multi-recorder TMR-200. The behavior of medium and loose sandy soil was evaluated with different parameters, these are; footing embedment, depth ratios (D/B), diameter of the impact plate (B), and the applied energy. It was found that increasing footing embedment depth results in: amplitude of the force-time history increases by about 10-30%. due to increase in the degree of confinement with the increasing in the embedment, the displacement response of the soil will decrease by about 25-35% for loose sand, 35-40% for medium sand due to increase in the overburden pressure when the embedment depth increased. For surface foundation, the foundation is free to oscillate in vertical, horizontal and rocking modes. But, when embedding a footing, the surrounding soil restricts oscillation due to confinement which leads to increasing the natural frequency, moreover, soil density increases with depth because of compaction, that is, tendency to behave as a solid medium.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.69-76
• /
• 2007

Axial behavior of tapered piles is affected by taper angle, stress state of soils, soil frictional angle and pile-soil interface friction angle. In this paper, a series of model pile load tests were performed using a calibration chamber in order to investigate the effect of taper angle on the axial response of cast-in-place tapered piles in sand. According to results of the tests, as taper angle of piles increased, the shaft load capacity of piles increased but its base load capacity decreased. The unit base load capacity of piles increased with increasing taper angle for medium sand but decreased for dense sand. The ratio of shaft to total load capacity increased with increasing taper angle and with decreasing relative density of soils. The test results also showed that total load capacity per unit pile volume increased with increasing taper angle for medium sand, but it decreased for dense sand. Therefore, it can be stated that tapered piles are economically more beneficial for medium sand than for dense sand.

• Weed & Turfgrass Science
• /
• v.5 no.2
• /
• pp.88-94
• /
• 2016

Vehicular traffic on turf results in loss of green cover due to direct tearing of shoots and indirect long-term soil compaction. Protection of turfgrass crowns from wear could increase the ability of turf to recover from heavy traffic. Plastic turfpavers have been installed in trafficked areas to reduce soil compaction and to protect turfgrass crowns from wear. The objectives of this study were to evaluate traffic performance of turfgrasses (Zoysia matrella and Axonopus compressus) and soil mixture (high, medium and low sand mix) combinations on turf-paver complex. The traffic performance of turf and recovery was evaluated based on percent green cover determined by digital image analysis and spectral reflectance responses by NDVI-meter. Bulk density cores indicated significant increase in soil compaction from medium and low sand mixtures compared to high sand mixture. Higher reduction of percent green cover was observed from A. compressus (30-40%) than Z. matrella (10-20%) across soil mixtures. Both turf species displayed higher wear tolerance when established on higher sand (>50% sand) than low sand mixture. Positive turf recovery was also supported by complementary spectral responses. Establishment of Zoysia matrella turf on turfpaver complex using high sand mixture will result in improved wear tolerance.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.223-226
• /
• 2001

Acoustic pressure transmission coefficient and phase velocity are measured as the functions of water porosity and air porosity in sand sediment slabs with water- and air-filled pores. Pores in the sand sediment slab we modeled as the structure of circular cylindrical tube shape filled with water and air. The first kind(fast) wave and second kind (slow) wave, identified by Biot, in the solid and fluid mixed medium are affected by the presence of water and air pores. Acoustic characteristics of such porous medium in water are also theoretically investigated in terms of the modified Biot-Attenborough (MBA) model, which uses the separate treatment of viscosity effect and thermal effect in non-rigid porous medium with water- and air-filed pores. The information on the fast waves introduces new concepts of the generalized tortuosity factor and dynamic shape factor.

• Korean Journal of Plant Resources
• /
• v.14 no.3
• /
• pp.241-246
• /
• 2001

Effects of cutting media on shooting and seedling characteristics were investigated to determine productivity of seedling by root cuttings of lacquer tree. Shoots developed at 3 weeks after cut planting on PV (peat moss : Vermiculite : 1 : 1), PVS (peat moss : Vermiculite : Sand : 1 : 1 : 2) and PVSC (peat moss : Vermiculite : Sand : Clay loam : 1 : 1 : 2 : 2) media, and shooting rate was the highest in PVSC medium at 10 weeks after cut planting among the treatments. Shooting numbers per scion on PH and PVC media were 2.2 but those on HSC medium was 1.3, which was not significantly different among media. PVSC medium was suitable to use the root cuttings of lacquer tree as it meets the qualifications requirements. Seedlings on PVSC medium were excellent to transplant in field as tree height, branch number, leaf number, stem diameter and leaf area were good.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.55-58
• /
• 2004

This paper investigated the results of quality of concrete using mixed sand with grading adjustment in order to find out the applicability of fine aggregate with bad grading, According to test results, fluidity of concrete with fine level grading river sand was decreased while with coarse level grading crushed sand increased compared with that with medium level grading crushed sand. Use of mixed sand with grading adjustment(MSG) resulted in an improvement in fluidity. Increase in fineness modulus led to an increase in bleeding, For compressive strength, use of MSG increased compressive strength. For drying shrinkage, use of fine level grading river sand resulted in an increasing drying shrinkage due to the larger presence of fine particles, while use of MSG led to a reduction in drying shrinkage

• Geomechanics and Engineering
• /
• v.15 no.1
• /
• pp.695-710
• /
• 2018

Formation of a soil plug in an open-ended pile is a very important factor in determining the pile behavior both during driving and during static loading. The degree of soil plugging can be represented by the incremental filling ratio (IFR) which is defined as the change in the plug length to the change of the pile embedment length. The experimental tests carried out in this research contain 138 tests that are divided as follows: 36 tests for single pile, 36 tests for pile group ($2{\times}1$), 36 tests for pile group ($2{\times}2$) and 30 pile group ($2{\times}3$). All tubular piles were tested using the poorly graded sand from the city of Karbala in Iraq. The sand was prepared at three different densities using a raining technique. Different parameters are considered such as method of installation, relative density, removal of soil plug with respect to length of plug and pile length to diameter ratio. The soil plug is removed using a new device which is manufactured to remove the soil column inside open pipe piles group installed using driving and pressing device. The principle of soil plug removal depends on suction of sand inside the pile. It was concluded that the incremental filling ratio (IFR) is changed with the changing of soil state and method of installation. For driven pipe pile group, the average IFR for piles in loose is 18% and 19.5% for L/D=12 and 15, respectively, while the average of IFR for driven piles in dense sand is 30% and 20% for L/D=12 and L/D=15 respectively. For pressed method of pile installation, the average IFR for group is zero for loose and medium sand and about 5% for dense sand. The group capacity increases with the increase of IFR. For driven pile with length of 450 mm, the average IFR % is about 30.3% in dense sand, 14% in medium and 18.3% for loose sand while when the length of pile is 300 mm, the percentage equals to 20%, 17% and 19.5%, respectively.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.366-369
• /
• 2002

Subsurface biobarrier technology has potential applications to contain contaminated groundwater and/or to degrade toxic pollutants in groundwater. Most biobarrier studies were conducted under aerobic condition, however there were several obstacles to make aerobic condition. Thus, In this study, we examined biobarrier formation under denitrifying condition by using nitrate as an electron acceptor. Experiments were performed with a sand column inoculated with activated sludge from the nearby WWTP. The substrate medium was pumped to the sand column in an upflow mode. During the low substrate loading rate period, the extent of reduction rate in hydraulic conductivity was found similar throughout the column, and permeability became relatively stable after couple of days. However, during the high substrate loading rate period, the column demonstrated a gradient of permeability reduction, with the greatest reduction in sections nearest the column inlet. Rapid growth of microorganisms near the column inlet resulted in the unbalanced reduction of hydraulic conductivity throughout the sand column. As a result, at this denitrifying condition the thickness of biobarrier could be controlled by adjusting the medium conditions of microbial growth.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.2
• /
• pp.1-13
• /
• 2017

Massive coastal sand dunes are distributed in Ui-island, Shinan-gun. The sand dunes in Ui-island is worth studying, in terms of preserving natural environment without anthropogenic impacts. In this study, we surveyed geomorphological processes of the sand dune based upon measuring of geometric properties, grain size analysis, and OSL(Optically Stimulated Luminescence) age dating. The sediments of the dune consist mainly of well sorted medium sand with about 250$\mu$m. Based on spatial distribution of sand dunes, we found that they are formed by northwest monsoon during winter, and sands are supplied from Seongchon area in northern UI-island. According to OSL age dating, the sand dunes were deposited from $0.07{\pm}0.01ka$ to $0.17{\pm}0.04ka$. This result shows that the transformation of the dune due to the sand movement by wind was active during the last 100-200 years. The aerial photograph indicates that the dimension of the largest sand dune has decreased since 1945. Further research is needed to get more detailed information on geomorphic changes of sand dunes in UI-island.