• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.156-157
• /
• 1998

It is a diffcult and challenging pproblem to control the growth of eppitaxial films. Heteroeppitaxy is esppecially idfficult because of the lattice mismatch between sub-strate and depposited layers. This mismatch leads usually to a three dimensional(3D) island growth. But the use of surfactants such as As, Sb, and Bi can be beneficial in obtaining high quality heteroeppitaxial films. In this study medium energy ion scattering sppectroscoppy(MEIS) was used in order to reveal the growth mode of Ge on Si(001) and the strain of depposited film without and with dynamically supplied atomic hydrogen at the growth thempperature of 35$0^{\circ}C$. It was ppossible to control the growth mode from layer-by-layer followed by 3D island to layer-by-layer by controlling the hydrogen flux. In the absent of hydro-gen the film grows in the layer-by-layer mode within the critical thickness(about 3ML) and the 3D island formation is followed(Fig1). The 3D island formation is suppressed by introducing hydrogen resulting in layer-by-layer growth beyond the critical thickness(Fig2) We measured angular shift of blocking dipp in order to obtain the structural information on the thin films. In the ppressence of atomic hydrogen the blocking 야 is shifted toward higher scattering angle about 1。. That means the film is distorted tetragonally and strained therefore(Fig4) In other case the shift of blocking dipp at 3ML is almost same as pprevious case. But above the critical thickness the pposition of blocking dipp is similar to that of Si bulk(Fig3). It means the films is relaxed from the first layer. There is 4.2% lattice mismatch between Ge and Si. That mismatch results in about 2。 shift of blocking dipp. We measured about 1。 shift. This fact could be due to the intermixing of Ge and Si. This expperimental results are consistent with Vegard's law which says that the lattice constant of alloys is linear combination of the lattic constants of the ppure materials.

• Journal of Microbiology and Biotechnology
• /
• 제16권12호
• /
• pp.1868-1873
• /
• 2006

A novel microorganism that could degrade high molecular weight gellan was screened and isolated from soil. On gellan plate, the microorganism grew well and completely liquefied the plate. The gellan-degrading microorganism was isolated by pure culture on glucose and nutrient agar medium afterwards. The 16S rDNA sequence analysis and biochemical tests using an API 50CHB/20E kit revealed that the strain belonged to Bacillus sp. The isolate, named as Bacillus sp. YJ-1, showed optimum gellan-degrading activity in 0.5% gellan medium at pH 7.5 and 37$^{\circ}C$. The activity was measured and evaluated by the thiobarbituric acid and thin-layer chromatography method. Mass spectrometry revealed that the major gellan.. depolymerized product was an unsaturated tetrasaccharide consisting of $\Delta$4,5-glucuronic acid-(1$\rightarrow$4 )-$\beta$-D-glucose-(1$\rightarrow$4)- $\alpha$-L-rhamnose-(1$\rightarrow$3)-$\beta$-D-glucose, which is a dehydrated repeating unit of gellan, thus the enzyme was identified as gellan lyase. When the gellan was present in the medium, the gellan-degrading activity was much higher than that in glucose-grown cells. These results indicate that in the presence of gellan, Bacillus sp. YJ-1 is able to metabolize the gellan by inducing gellan-degrading enzymes that can degrade gellan into small molecular weight oligosaccharides, and then the gellan. depolymerized products are taken up by the cells and utilized by intracellular enzymes.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1276-1285
• /
• 2015

최근 들어, 자기 간섭 제어 기술의 발달로 인하여 PHY 계층에서는 full-duplex 통신이 가능한 수준에 도달하였다. 이러한 full-duplex 통신을 지원하기 위한 다양한 MAC 계층의 기술들이 활발히 연구 중이다. 본 논문에서는 무선랜 (WLAN) 시스템에서 full-duplex 통신의 특징과 이로 인하여 발생하는 문제점들을 알아보고, 이 문제를 해결하기 위하여 제안된 다양한 MAC 프로토콜을 살펴본다. 그리고 현재 초기 단계에 있는 무선랜 시스템에서의 full-duplex 통신과 관련된 MAC 계층의 향후 연구 과제를 논의한다.

• Geomechanics and Engineering
• /
• 제15권2호
• /
• pp.793-803
• /
• 2018

Based on the theory of porous media, an interaction system of a floating pile and a saturated soil in cylindrical coordinates subjected to vertical harmonic load is presented in this paper. The surrounding soil is separated into two distinct layers. The upper soil layer above the level of pile base is described as a saturated viscoelastic medium and the lower soil layer is idealized as equivalent spring-dashpot elements with complex stiffness. Considering the cylindrically symmetry and the pile-soil compatibility condition of the interaction system, a frequency-domain analytical solution for dynamic impedance of the floating pile embedded in saturated viscoelastic soil is also derived, and reduced to verify it with existing solutions. An extensive parametric analysis has been conducted to reveal the effects of the impedance of the lower soil base, the interaction coefficient and the damping coefficient of the saturated viscoelastic soil layer on the vertical vibration of the pile-soil interaction system. It is shown that the vertical dynamic impedance of the floating pile significantly depends on the real stiffness of the impedance of the lower soil base, but is less sensitive to its dynamic damping variation; the behavior of the pile in poro-visco-elastic soils is totally different with that in single-phase elastic soils due to the existence of pore liquid; the effect of the interaction coefficient of solid and liquid on the pile-soil system is limited.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권1호
• /
• pp.1-13
• /
• 2009

플래시 메모리는 크기가 작고, 적은 전력을 사용하며 충격에 강하기 때문에 MP3 플레이어, 핸드폰, 디지털 카메라와 같은 휴대용 기기에서 저장장치로 널리 사용되고 있다. 플래시 메모리의 많은 장점 때문에 개인용 컴퓨터 및 노트북에서 사용되는 저장장치인 하드디스크를 플래시 메모리로 대체하고자 하는 연구도 진행되고 있다. 플래시 메모리는 덮어쓰기가 허용되지 않으며 읽기/쓰기의 기본 단위와 삭제의 기본 단위가 다르기 때문에 FTL(Flash Translation Layer)라는 플래시 변환 계층을 사용한다. 최근에는 기존의 플래시 메모리와 다른 물리구조와 특성을 갖는 대블록 플래시 메모리가 등장하여 기존의 FTL을 그대로 사용하게 되면 플래시 메모리를 효율적으로 사용할 수 없다. 본 논문에서는 기존의 FTL 중 가장 좋은 성능을 내는 FAST(Fully Associative Sector Translation)을 기반으로 데이타블록 내에서 페이지단위 사상을 적용하여 대블록 플래시 메모리의 특성에 맞는 FTL 기법을 제안한다.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.640-650
• /
• 1999

As an optimal quality of the restorations, there should be a least amount of seating discrepancy between the casting and abutment teeth. However, high viscosity of the cementing medium and its resulting thickness may prevent complete seating of the restoration. The use of die spacing material provides adequate internal relief for the cementing medium. The purpose of this study is to compare the thickness of three commonly used die spacing materials. Materials and Methods: Stone plates were fabricated and divided into 12 sections to be painted with die spacers. Tru-Fit, Whip-Mix and Belle do St. Claire die spacer which are commonly used in dental practice were tested in this study. Each die spacers were painted layer by layer according to the manufacturer's recommendation. The average thickness of each die spacers were measured with light microscope(${\times}100$) and compared between them. Results and Conclusions. A silver-colored Tru-Fit die spacer has the lowest value of thickness without statistical significance comparing with a gold-colored Tru-Fit die spacer and a gray layer of Whip-Mix die spacer has the highest value of thickness without any statistical significance comparing with Belle de St. Claire die spacer. Three and four layers of Tru-Fit die spacer and two layers of Whip-Mix and Belle de St. Claire die spacers seem to be in the acceptable range of thickness of 25 to $45{\mu}m$ for optimal seating of the restorations. The standard experimental design and method should be fur thor evaluated for more consistent and objective results.

• 폴리머
• /
• 제25권2호
• /
• pp.302-310
• /
• 2001

무전해도금법을 이용하여 구리/PET 필름 복합재료를 제조하였으며 에칭방법과 촉매액의 조성 및 acceleration 방법을 달리하여 PET 필름과 무전해도금된 구리 피막간의 접착력을 향상시키고자 하였다. HCl 용액으로 에칭된 PET 필름은 NaOH에 의한 것보다 더욱 세밀하게 에칭되어져 구리와 PET 필름간의 접착력은 향상되었으나 전자파 차폐효과는 유사한 경향을 보였다. 촉매액의 조성변화에 따른 영향을 살펴본 결과 PdCl$_2$:SnCl$_2$의 몰비가 1:4에서 1:16으로 증가할수록 PET 필름 위에 적층된 Pd/Sn 콜로이드 입자들의 크기가 감소하며 고르게 분포되는 경향을 보였다. 따라서 이들의 몰비가 증가할수록 구리도금이 균일하고 조밀하게 이루어져 접착력 및 차폐효과가 증가하였다. 또한 NaOH보다 HCl로 acceleration한 경우 촉매 입자의 크기가 작고 더 균일하게 분포되어 우수한 접착력과 도금물성을 나타내었다.

• Interaction and multiscale mechanics
• /
• 제3권1호
• /
• pp.95-110
• /
• 2010

In recent years, study of the static response of pavements to moving vehicle and aircraft loads has received significant attention because of its relevance to the design of pavements and airport runways. The static response of beams resting on an elastic foundation and subjected to moving loads was studied by several researchers in the past. However, most of these studies were limited to steady-state analytical solutions for infinitely long beams resting on Winkler-type elastic foundations. Although the modelling of subgrade as a continuum is more accurate, such an approach can hardly be incorporated in analysis due to its complexity. In contrast, the two-parameter foundation model provides a better way for simulating the underlying soil medium and is conceptually more appealing than the one-parameter (Winkler) foundation model. The finite element method is one of the most suitable mathematical tools for analysing rigid pavements under moving loads. This paper presents an improved solution algorithm based on the finite element method for the static analysis of rigid pavements under moving vehicular or aircraft loads. The concrete pavement is discretized by finite and infinite beam elements, with the latter for modelling the infinity boundary conditions. The underlying soil medium is modelled by the Pasternak model allowing the shear interaction to exist between the spring elements. This can be accomplished by connecting the spring elements to a layer of incompressible vertical elements that can deform in transverse shear only. The deformations and forces maintaining equilibrium in the shear layer are considered by assuming the shear layer to be isotropic. A parametric study is conducted to investigate the effect of the position of moving loads on the response of pavement.

• 식물조직배양학회지
• /
• 제28권3호
• /
• pp.123-128
• /
• 2001

인삼 callus의 기내배양에 의해서 항암물질을 대량생산하기 위한 연구의 일환으로 인삼 우수계통으로부터 기내에서 callus를 유기하여 polyacetylene 고함유 세포주를 선발하고, 인삼 callus의 polyacetylene 생산에 미치는 식물호르몬 및 배지의 영향을 조사하였다. 식물호르몬 CPA가 첨가된 MS배지에서 유도된 인삼 우수계통 callus에서는 polyacetylene 중에서 panaxynol은 TLC와 GC에 의해서 전혀 검출할 수 없었으나, callus에 따라서는 panaxydol이 형성됨을 확인할 수 있었다. 특히, 강력한 항암효과를 가지고 있는 panaxydol은 우수계통 callus 18종 중에서 5종이 형성하였으며, 30201계통 callus에서 가장 많이 검출되었다. 또한 인삼 10301계통 callus는 CPA가 단독으로 첨가된 배지에서 panaxydol을 생성하지 못하였으나, CPA 2 mg/L와 BA 0.05 mg/L 첨가구에서는 callus의 생장도 양호하였으며, panaxydol도 생성하였다. 인삼 callus의 생장과 panaxydol의 합성에는 MS배지보다 SH 배지가 더 양호하였으며, NAA와 sucrose는 전혀 영향을 미치지 않았다.

• ETRI Journal
• /
• 제32권5호
• /
• pp.713-721
• /
• 2010

E-textile technology has earned a great deal of interest in many fields; however, existing wearable network protocols are not optimized for use with conductive yarn. In this paper, some of the basic properties of conductive textiles and requirements on wearable personal area networks (PANs) are reviewed. Then, we present a wearable personal network (WPN), which is a four-layered wearable PAN using bus topology. We have designed the WPN to be a lightweight protocol to work with a variety of microcontrollers. The profile layer is provided to make the application development process easy. The data link layer exchanges frames in a master-slave manner in either the reliable or best-effort mode. The lower part of the data link layer and the physical layer of WPN are made of a fabric serial-bus interface which is capable of measuring bus signal properties and adapting to medium variation. After a formal verification of operation and performances of WPN, we implemented WPN communication modules (WCMs) on small flexible printed circuit boards. In order to demonstrate the behavior of our WPN on a textile, we designed a WPN tutorial shirt prototype using implemented WCMs and conductive yarn.