• 제목/요약/키워드: medium dense

검색결과 149건 처리시간 0.024초

알코올계 이용한 YBCO 초전도 전기영동전착막의 제작 (Preparation of Electrophoretic deposited YBCO superconducting film with alcohol-based suspension)

  • 소대화;박정철;추순남;전용우;조용준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 기술교육위원회 창립총회 및 학술대회 의료기기전시회
    • /
    • pp.1-4
    • /
    • 2001
  • In electrophoresis, it is studied to get best condition of suspension media with alcoholic system for superconducting film. High-temperature superconductor films of $YBa_{2}Cu_{3}O_{7-x}$ were fabricated by electrophoretic deposition(EPD) from alcohol-based suspension. Maximum stability is observed for the suspension containing iso-alcohol as dispersion medium. However, for the formation of a dense and adherent coating of YBCO on a silver substrate by EPD. the best results were obtained in mixing PrOH and BuOH suspension. The superconducting critical current density($J_c$) was $1,200A/cm^2$ for the films deposited in 30% iso-PrOH and 70 % iso-BuOH suspension.

  • PDF

해외 방사성 폐기물 처분장 개념 설계 분석 (Analysis on the concept design of the nuclear waste disposal site in foreign country)

  • 서경원;김웅구;백기현;전성근
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 춘계 학술발표회
    • /
    • pp.791-800
    • /
    • 2010
  • This paper presents the construction status and the conceptual designs of midium and high level radioactive waste disposal facilities from all around world. For the midium radioactive waste, a shallow disposal using trench or a deep depth disposal are adopted. However, these are rather focusing on the social and cultural point of view than the technical. Meanwhile, the high level radioactive waste is basically disposed in the deep underground. The corresponding ground conditions are usually dense and composed of sedimentary and crystalline rocks mainly with low permeability. A barrier system is made of canister which consists of copper, titanium, and tin. The inner and outer side of the canister are composed of different materials respectively.

  • PDF

Identifying Cluster Candidates in CFHTLS W2 Field

  • Paek, Insu;Im, Myungshin;Kim, Jae-Woo
    • 천문학회보
    • /
    • 제43권1호
    • /
    • pp.59.2-59.2
    • /
    • 2018
  • Recent studies of galaxy clusters have shown that the galaxy clusters in dense environment tend to have lower star formation rate in local universe with z < 1. However, this correlation is not significant in galaxy clusters with z > 1. The study of galaxy clusters around z=1 can yield insight into cosmological galaxy evolution. Nevertheless, the identification of galaxy clusters beyond the scope of immediate local universe requires wide field data in optical and near-infrared bands. By incorporating data from Canada-France-Hawaii Telescope Legacy Survey(CFHTLS) and Infrared Medium-Deep Survey(IMS), the photometric redshifts of galaxies in CFHTLS W2 field were calculated. Using spatial distribution and photometric redshifts, the galaxies in the field were divided into redshift bins. The image of each redshift bin was analyzed by measuring the number density within proper distance of 1Mpc. By comparing high density regions in consecutive redshift bins, we identified the cluster candidates and mapped the large-scale structure within the CFHTLS W2 field.

  • PDF

Country Analysis: Algeria

  • Mehyaoul, Quafaa
    • Asian Journal of Business Environment
    • /
    • 제5권3호
    • /
    • pp.29-31
    • /
    • 2015
  • Purpose - The purpose of this country analysis is to examine its current state: economically, politically, legally, and ethically, and look at small and medium Algerian businesses to identify any issues that could hinder economic and business performance and growth. Research Design, and Methodology - This is a case study, an analytical approach, which focuses on exploring and analyzing different aspects of Algeria. Results - Since 2008, the Algerian economy has experienced a relative slowdown due to falling oil and gas prices and the economic recessions of its main trading partners, in particular, European countries. Algeria has still not managed to diversify its economy or establish competitive industrialization at the international level; it has had difficulty shifting from its economic dependence on hydrocarbons. Algerian businesses continue to face obstacles and constraints, penalized in their performance and prevented from success in a dense and competitive global marketplace. Conclusion - The Algerian economy and Algerian businesses have shown positive performance and growth over the last few decades. However, issues exist that may hinder both business and economic progress in the future.

Fabrication of Large-Size Alumina by Pressure-Vacuum Hybrid Slip Casting

  • Cho, Kyeong-Sik;Lee, Seung Yeul
    • 한국세라믹학회지
    • /
    • 제50권6호
    • /
    • pp.396-401
    • /
    • 2013
  • The size of various alumina ceramics used in the semiconductor and display industries must be increased to increase the size of wafers and panels. In this research, large alumina ceramics were fabricated by pressure-vacuum hybrid slip casting (PVHSC) employing a commercial powder, followed by sintering in a furnace. In the framework of the PVHSC method, the consolidation occurs not only by compression of the slip in the casting room but also by suction of the dispersion medium from the casting room. When sintered at $1650^{\circ}C$ for 4 h, the fabricated large-size alumina ($1,550{\times}300{\times}30mm^3$) exhibited a dense microstructure corresponding to more than 99.2% of the theoretical density and a high purity of 99.79%. The flexural and compressive strengths of the alumina plate were greater than 340 MPa and 2,600 MPa, respectively.

Cyclic liquefaction and pore pressure response of sand-silt mixtures

  • Dash, H.K.;Sitharam, T.G.
    • Geomechanics and Engineering
    • /
    • 제3권2호
    • /
    • pp.83-108
    • /
    • 2011
  • The effect of non-plastic fines (silt) on liquefaction and pore pressure generation characteristics of saturated sands was studied through undrained stress controlled cyclic triaxial tests using cylindrical specimens of size 50 mm diameter and height 100 mm at different cyclic stress ratios and at a frequency of 0.1 Hz. The tests were carried out in the laboratory adopting various measures of sample density through various approaches namely gross void ratio approach, relative density approach, sand skeleton void ratio approach, and interfine void ratio approach. The limiting silt content and the relative density of a specimen were found to influence the undrained cyclic response of sand-silt mixtures to a great extent. Undrained cyclic response was observed to be independent of silt content at very high relative densities. However, the presence of fines significantly influenced this response of loose to medium dense specimens. Combined analyses of cyclic resistance have been done using the entire data collected from all the approaches.

실트질 모래의 액상화 후 반복하중에 의한 동적거동 (Post-liquefaction Behavior under Cyclic Loading of a Silty Sand)

  • 강병희;박근보;서명하
    • 한국지반공학회논문집
    • /
    • 제16권5호
    • /
    • pp.37-43
    • /
    • 2000
  • 보통으로 다져진 실트질 모래(Dr=50%)에 대한 액상화 전후 상태에서의 반복하중에 의한 동적거동을 연구하기 위하여 몇가지의 압밀응력비로서 압밀시킨공시체에 대해서 일련의 일련의 반복삼축시험을 수행하였다. 연구결과로서 압밀응력비가 액상화거동에 미치는 영향을 나타내었으며 또한 액상화 전후의 동적거동을 비교하였다. 그리고 액상화 후의 거동은 선행액상화시의 응력반전여부에 의해서 절대적으로 좌우된다는 사실을 보여주고 있다. 결론적으로 액상화를 경험한 공시체의 액상화저항은 액상화를 경험하지 않은 공시체에 비해서 이방압밀의 경우에는 높고 등방압밀의 경우에는 낮다.

  • PDF

훼로보론과 NaBF4 에 의한 강재의 침 경화처리에 관하여 (Study on the Boriding of Steel in Ferroboron and NaBF4 Powder Mixture)

  • 김문일;여운관
    • 한국표면공학회지
    • /
    • 제8권3호
    • /
    • pp.5-11
    • /
    • 1975
  • The boronizing method using ferroborn and NaBF4 powder mixture was studied for surface hardening of medium carbon steel. This boride layer was compared with a boride layer that was formed in ferroboron and KBF4 powder mixture. The frequency factor and activation energy were discussed in this paper. The main results obtained can be summerized as follow. 1) The optimum range of NaBF4 content is 10 to 15% of weight to obtain a thick and dense boride layer. 2) The depth of the boride layer was approximately expressed by the following equation : {{{{d=100 exp (-18,000/RT) SQRT { t} }} 3) The oxidating resistance of boronized steel proved to be good at 800$^{\circ}C$ but almost unacceptable near at 900 $^{\circ}C$. 4) The NaBF4 effect was the same as that reported for KBF4.

  • PDF

Environmental Dependence of High-redshift Galaxies in CFHTLS W2 Field

  • 백인수;임명신;김재우
    • 천문학회보
    • /
    • 제43권2호
    • /
    • pp.36.1-36.1
    • /
    • 2018
  • Star formation activity of galaxies, along with color and morphology, show significant environmental dependence in local universe, where galaxies in dense environment tend to be more quiescent and redder. However, many studies show that such environmental dependence does not continue at higher redshifts beyond z~1. The question of how the environmental dependence of galactic properties have developed over time is crucial to understanding cosmic galactic evolution. By combining data from Canada-France-Hawaii Telescope Legacy Survey(CFHTLS), Infrared Medium-Deep Survey(IMS), and other surveys, the photometric redshifts of galaxies in CFHTLS W2 field were estimated by fitting spectral energy distribution. The distribution of galaxies was mapped in redshift bins of 0.05 interval from 0.6 to 1.4. For each redshift bin, the number density was mapped. The galaxies in high density regions were grouped into clusters using friend-of-friend method. The color of galaxies were analyzed to study the correlation with redshift as well as environmental difference between field galaxies and cluster member galaxies.

  • PDF

대청도 모래울 사구의 지형 특성과 OSL 연대 (Geomorphological Characteristics and OSL Ages of the Moraeul dune in Daechoengdo Island, South Korea)

  • 최광희
    • 한국지형학회지
    • /
    • 제27권4호
    • /
    • pp.1-11
    • /
    • 2020
  • Coastal dunes play an important role in coastal defense. The Moraeul dune in Daecheongdo Island is representative in this regard. However, there is little knowledge, concerning the morphology, grain size, and formation timing of the dune. This study investigated the geomorphological characteristics of the Moraeul dune using topographic surveys, grain size analyses, and OSL dating. The dune was classified as 'single accreted foredune', which was developed under dense vegetation cover and efficient sand trapping. The dune consisted of fine to medium sand with 1.6Φ of mean grain size, and was covered with pine trees (> 100 years old). The samples from the upper part of the dune yielded quartz OSL ages ranging 0.5 ~ 0.7 ka. Therefore, it is likely that the dune developed at least before the Little Ice Age and became what it is today about one century ago.