• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.73-82
• /
• 2018

This research investigated the mechanical properties of the 4 different types of $3{\times}3$ cable stitches on weft knitted fabrics. The 4 kinds of cable-stitch fabrics were knitted under the same knitting conditions, then the mechanical properties, such as tensile strength, elongation, stiffness, etc. were measured according to the Korean Industrial Standards (KS K 0642). The knitting time for the sample produced by the knitting process 1 was the shortest among the 4 different types of samples. It means that the knitting process 1 would have benefits of higher productivity if there is no yarn breakage during the knitting of the cable stitches. In the test for tensile strength, the samples produced by knitting processes 3 and 4 have tensile values of approximately 8~11% higher than the sample produced by knitting process 1. The test for elongation also shows that the samples produced by knitting processes 3 and 4 have up to 18% higher elongation values than the sample produced by knitting process 1. On the other hand, the stiffness test showed no significant difference between the 4 samples. This study is expected to increase the competitiveness of the local knitting industry as a result of providing basic data on the mechanical properties of special knitted stitches, such as cable stitches.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.1 s.160
• /
• pp.68-76
• /
• 2007

The purpose of this study is to investigate change of mechanical and physical properties, shape behavior and hand value in weft knit when rib stitch and milan stitch are combined. The knit stitches used in this study are plain stitch, half milan rib stitch, milan rib stitch, $2{\times}1$ rib stitch, $2{\times}1$ half milan rib stitch and $2{\times}1$ milan rib stitch. We analyzed physical and mechanical properties(tensile, bending, shear, compression, surface properties, thickness and weight) of the knit stitches and calculated their primary hand value and total hand value through translational formulas using the KES(Kawabata Evaluation System). The results are as follows; In evaluation of mechanical properties and hand values of knit stitches, plain stitch had the highest flexibility and the lowest T.H.V. as women's winter knit wear. Since $2{\times}1$ rib stitch had too high elongation in one direction, although it had the highest T.H.V, it needs to be careful when plain stitch and $2{\times}1$ rib stitch are applied for women's winter knit wear. Since Milan rib stitch and $2{\times}1$ milan rib stitch had high T.H.V. similarly, it is considered that they are suitable for women's winter knit wear. Specially, when Milan stitch is combined with $2{\times}1$ rib stitch, its shape stability and fullness are contained and flexibility is added on it. Therefore, $2{\times}1$ milan rib stitch can be also applied for women's winter knit wear.

• Journal of Fashion Business
• /
• v.14 no.2
• /
• pp.57-72
• /
• 2010

The purposes of the research were to find out the clothing construction factors of the mechanical industry working clothes by analyzing the working clothes supplied to 5 subject companies; and to suggest the optimized sewing conditions and the seam strength and elongation experimental data according to the clothing material and seam types implied to the working clothes collected. The fabric types and trimmings used for the mechanical manufacturing working clothes were Polyester/Cotton(65/35%), Polyester/Rayon(65/35%), Cotton(100%); and linings, interlining, various fastenings etc. 2 stitch types, i.e. lock and two-thread chain stitches were applied to the construction of the flat, lap felled, French, superimposed, lapped and bound seams for the seam strength and elongation experiment. The results derived from the experiment were as follows. (1) The seam strength results according to the seam types were high in the order of lap felled>lapped>flat, superimposed and French seams. (2) Considering the features of the seam construction, as the number of fabric layers at the seam line increased the seam strength also increased. (3) Apart from the highest seam strength from the experiment using the net lining with the main fabric, the seam construction consisting of two fabric layers with the interlining showed relatively high seam strength results. (4) The seam elongations according to the stitch types were high in the order of two-thread chain>lock stitches.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.1-10
• /
• 2007

This study aims at the improvement of sewing function through understandings of dynamic property about the sewing methods and the thread material selection in knitwear. The tensile strength and shear of KES-FB and the Instron were measured for the analysis of the mechanical properties. The knit cloth was structured In the plain stitch, $1\times1$ rib stitch and $2\times1$ rib stitch with the combination of wool and cotton. With regard to the sewing method, intralooping and interlacing were applied. For thread materials, polyester, cotton, wool and silk were used. Since silk has the lowest extension and similar values regardless of its construction in intralooping, it is available knit apparel with uniform elastic recoverv. It also has small shearing resistance. It can be used in apparel which needs big mobility, but it causes rutting problem. Therefore, it is suitable to use intralooping. When the same sewing yarn and textile are use, it can lower shearing resistance and extension in intralooping, Since wool needs a lot of extension energy and it can be cut, intralooping is more suitable than interlacing in sewing of wool. In interlacing using polyester, extension and shearing resistance are high. Therefore, it is suitable for knit sewing with high massing. Silk is not suitable for interlacing since it can be rut. Even though knit materials are different, the RT values of polyester and cotton are similar in same construction. Therefore, they can be substituted each other considering resilience after sewing.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.298-311
• /
• 2019

In this study, the mechanical properties and hand characteristics of the knitted and woven fabrics for bedding items are investigated in accordance with fabric structural parameters including the fiber type and proportion, the density of the fabric, and the knit/weave structure. The knit stitches and structure of the knit samples made an effect on tensile properties. The bending, shear and compression properties for the knit fabric were mainly affected by fiber contents of the samples. The tensile and bending properties of woven samples were highly correlated with the fabric density, thickness and structure, and those shear and compression properties were affected by the fiber contents and structure. Consequently, the primary hand values of the selected samples we developed were estimated to have good smoothness, fullness and softness, and soft feeling, which is well correlated to the parameters of consumer preference such as softness, warmness, and bulkiness. Also, their total hand values were increased.

• International Journal of Automotive Technology
• /
• v.7 no.6
• /
• pp.721-728
• /
• 2006

This paper is concerned with development of digital assembly cell. Automotive industries, try to find out new welding technologies to replace the existing spot welding which is not appropriate anymore. Because of many advantages like good accessibility, welding quality and fast welding speed, laser welding seems the most appropriate solution for automobile manufactures. To apply this technology to welding of car body, experiments must be conducted according to material, geometry and layer in welding area. Based on the data of these experiments, the laser welding process and the quality of stitches are identified. And then, the comparison between the requirements of welding and the potential of equipments allows selecting the best equipments. By using the digital manufacturing, the configurations of laser welding cell are carried out. After all, the optimal laser welding cell is chosen by the evaluation of alternative cells with technical and organizational criteria.

• Journal of Chest Surgery
• /
• v.48 no.5
• /
• pp.307-310
• /
• 2015

Background: To evaluate our experience of early surgical plication for diaphragmatic eventration (DE) in infancy and childhood. Methods: This study evaluated infants and children with symptomatic DE who underwent plication through an open transthoracic approach in our childhood development department between January 2005 and December 2012. Surgical plication was performed in several rows using polypropylene U-stitches with Teflon pledgets. Results: The study included 12 infants and children (7 boys and 5 girls) with symptomatic DE (9 congenital and 3 acquired). Reported symptoms included respiratory distress (91.7%), wheezing (75%), cough (66.7%), and recurrent pneumonia (50%). Preoperative mechanical ventilatory support was required in 41.7% of the patients. The mean length of hospital stay was $6.3{\pm}2.5days$. The mean follow-up period was $24.3{\pm}14.5months$. Preoperative symptoms were immediately relieved after surgery in 83.3% of patients and persisted in 16.7% of patients one year after surgery. All patients survived to the end of the two-year follow-up and none had recurrence of DE. Conclusion: Early diagnosis and surgical plication of the diaphragm for symptomatic congenital or acquired diaphragmatic eventration offers a good clinical outcome with no recurrence.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.990-995
• /
• 2011

This study analyzed the effects of the knit stitch type, fiber composition, and yarn thickness on the mechanical properties of knitted fabric. The results were as follows: The course density was the highest in the case of the rib stitch. On the other hand, the wale density was the highest in the case of the float stitch. The thickness was the highest in the case of the rib stitch. The same results were obtained even for different fiber compositions and yarn thicknesses considered in this study. The burst strength of wool knit fabric was higher than that of A/W knit fabric. The stiffness was the lowest in the case of the plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The pilling properties were excellent for all knit stitches, fiber composition, and yarn thicknesses as pilling degree : 5. The air permeability decreased in the following order : rib > plain > float stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The heat retention rate decreased in the following order : rib > float > plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses.

• Archives of Reconstructive Microsurgery
• /
• v.19 no.1
• /
• pp.37-45
• /
• 2010

Purpose: First introduced by Buncke and Rose in 1979, the neurovascular partial $2^{nd}$ toe pulp free tissue transfer has been attempted to reconstruct posttraumatic finger tip injuries. Although some surgeons prefer other reconstructive methods such as skin graft and local flap, we chose the partial $2^{nd}$ toe pulp flap owing to its many advantages. We report three successful surgical cases in which the patients had undergone this particular method of reconstruction. Methods: We retrospectively examined three cases of fingertip injury patients due to mechanical injury. Bone exposure was seen in all three cases, All had undergone partial toe pulp free flap for soft tissue defect coverage. Results: All flaps survived without any complications such as partial necrosis, hematoma or dehiscence. Although tingling sensation has returned in both cases, two-point discrimination has not returned yet. Currently no patient is complaining of any pain which gradually improved during their course of recuperation. All stitches were removed on postoperative 2 weeks. Patients are satisfied with the final surgical result and there are no signs of any edema or hematoma. Conclusion: The homodigital reconstruction of finger tip injury using the partial $2^{nd}$ toe pulp flap has numerous advantages compared to other reconstructive modalities such as its resistance to wear and tear and in that it provides a non-slip palmar digital surface. However it requires microsurgery which may not be preferred by surgeons. Advanced age of the patient can be a relative contraindication to this approach since atheromatous plaque from the donor toe can compromise flap circulation after surgery. We report three successful cases which patient age was considered appropriate. Further investigation with a larger number of cases and long term follow-up is deemed necessary.