• 반도체디스플레이기술학회지
• /
• 제2권2호
• /
• pp.31-37
• /
• 2003

This paper presents a measurement system of mechanical property using dual servo system. There are many kinds of method to measure material properties such as tensile test, indention and bending test. It is highly required to measure the properties of nano-sized material and structure. However, It is need more accurate measurement system, more stable and frequency response than conventional test. In this paper, we designed the dual servo system for a measuring instrument The dual servo system consisting of a coarse stage and a fine motion stage with VCM and PZT is proposed. Mechanical mechanism is designed with the leaf spring type of flexure hinge joint. Lead compensator is applied to this control system, and is designed by PQ method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.738-741
• /
• 2004

The overall performance of AC servo system is greatly affected by the uncertainties of unpredictable mechanical parameter variations and external load disturbances. Therefore, to compensate this problem, it is necessary to know different parameters and load disturbances subjected to position/speed control. This paper proposes an online identification method of mechanical parameters/load disturbances for AC servo system using Support Vector Regression (SVR). The proposed methodology advocates analytic parameter regression directly from the training data, rather than adaptive controller and observer approaches commonly used in motion control applications. The experimental results demonstrate that the proposed SVR algorithm is appropriate for control of unknown servo systems even with large measurement noise.

• Journal of Welding and Joining
• /
• 제24권6호
• /
• pp.13-20
• /
• 2006

Resistance spot welding is widely used for joining sheet metals in the automotive manufacturing process. Recently, servo-gun is used to increase the productivity and precise control the acting force. However, force control mechanisms have not been investigated with servo-guns until now. In this paper, it is proved that servo-motor current is proportional to torque and by experiment, experimental equation between servo-motor current and electrode force was derived. Algorithm for feedback control of electrode force was suggested using current measurement. In addition, applying soft touch method to this system the impact between electrode and specimen, which is the problem of air gun, could be reduced. Indentation made the force decrease in holding time of resistance spot welding. In order to overcome this problem, force compensation using the servo gun was used and it improved weld strength in good welding current range.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.317-320
• /
• 1999

A robust end time optimal conかof strategy for dual-stage servo system is presented. The time optimal trajectory for a mass-damper system is determined and given os a reference input to the servo system. The feedback controller is constructed so that the fine stage tracks the coarse stage errors and robustly designed as the“perturbation compensated sliding mode control(PCSMC)”law, a combination of slid-ing mode controller(SMC) and perturbation observer(PO). In addition, a null motion controller which regulates the fine stage at its neutral position is designed based on the“dynamic consistency”So, the overall dual-stage servo system exhibits the robust and time-optimal performance. The inherent merit and performance of the dual-stage system will be shown.

• 한국산업융합학회 논문집
• /
• 제3권2호
• /
• pp.115-121
• /
• 2000

This paper presents reducing method of profile error on a mechanical tuning for multi-spindle control of NC machine tools. To reduce the profile error in the feed drive system, it is useful to adopt same transfer function of multi spindle machine tools. By selecting the correction vector of servo rigidity and natural vibration on JK map, multi spindle control can be tuned by mechanical parameters with small profile error.

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.394-401
• /
• 2010

In this article, we investigate a robust friction compensation scheme for the purpose of accomplishing precision positioning performance a servo mechanical system with nonlinear dynamic friction. To estimate the friction state and tackle robustness problem for uncertainty, a RFNN and reconstructed error compensator as well as a robust friction state observer are developed. The asymptotic stability of the series of friction compensation methodologies are verified from the Lyapunov's stability theory. Some simulations and experiments on a servo mechanical system were carried out to evaluate the effectiveness of the proposed control scheme.

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.157-165
• /
• 2002

The design of hydraulic & control system has been developed for the disc spinning machine. The hydraulic system has been designed in the overall system including the vertical & horizontal slide fur spinning works which are controlled by hydraulic servo valves in right & left side, and the clamping slide for holding & pressing blank material in center during spinning process. Based on the design concept of this hydraulic system, model test experiments for hydraulic servo control system is tested to conform confidence and applying possibility. The control system is introduced with the fuzzy-sliding mode controller for the hydraulic force control reacting force as a disturbance, because a fuzzy controller does not require an accurate mathematical model for the generation of nonlinear factors in the actual nonlinear plant with unknown disturbances and a sliding controller has the robustness & stability in mathematical control algorithm. We conform that the fuzzy-sliding mode controller has a good performance in force control for the plant with a strong disturbance. Also, we observe that a steady state error of the fuzzy-sliding mode controller can be reduced better than those of an another controllers.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권2호
• /
• pp.153-160
• /
• 1999

Dual-stage servo system for super-high density HDD has the chances of being composed of the coarse actuator(VCM) for track-seeking control and the fine actuator(microactuator) for-following control in near future. This paper presents the concept design of dual-stage servo system and the track-following control using an electrostatic microactuator for super-high density HDD. The electrostatic microactuator is designed and fabricated by MEMS(micro-electro-mechanical system) process. Both the nonlinear plant(voltage/displacement-to-electrostatic force) and the linear plant(electrostatic force-to-displacement) of the microactuator are established. Inverse function of the nonlinear plant is employed for a feedforward nonlinear compensator design. And feedforward control effect of this compensator is shown by time-domain experiments. A track-following feedback controller is designed using the feedback nonlinear compensator which is derived from the feedforward nonlinear compensator. The track-following control experiment is done to show the control efficiency of the proposed control system. And, excellent track-following control performance(2.21kHz servo-bandwidth, 7.51dB gain margin, $50.98^{\circ}$phase margin) is achieved by the proposed control system.

• 대한기계학회논문집A
• /
• 제39권2호
• /
• pp.219-225
• /
• 2015

유압 서보 시스템은 구동기 단에서 부피 대비 큰 힘을 출력할 수 있으므로 로봇에 적용 시, 로봇의 팔 또는 다리를 경량화할 수 있다. 이것은 로봇의 동적 특성과 에너지 효율을 향상 시키므로 고출력이 필요한 몇몇의 근력지원용 착용형 로봇과 사족 보행 로봇들은 유압 서보 시스템을 사용한다. 이 로봇들은 사용자나 외부 환경에 순응하기 위해 힘제어를 하는 것이 유리하지만 유압식 로봇은 유압서보 시스템이 갖는 비선형성으로 인해 정교한 힘제어가 쉽지 않다. 본 논문에서는 서보 밸브, 배관 그리고 유압 실린더로 구성되는 유압 서보 시스템의 시뮬레이션 모델을 개발하여 유압 서보 시스템의 힘제어 시 고려해야 할 사항에 대해 분석하였다. 그리고 비선형 모델을 이용한 힘제어 기법을 제안하고 시뮬레이션을 통해 효과를 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.982-986
• /
• 1996

The development of a high power BLDC servo system for a control of the large scale mechanical system is presented. Using DSP TMS320C30, a control unit which is suitable for motor drive system, is developed. Also, based on the developed control unit, BLDC drive system for the speed control is constructed. The algorithms of the vector control, current control, and speed control is implemented using TMS320C30 Software Development Tool. The developed high power BLDC motor drive system is applied to the large scale mechanical system and its feasibility is verified through the experimental results.