• 한국생활과학회지
• /
• 제18권3호
• /
• pp.749-756
• /
• 2009

Keeping abreast with the latest consumer's trends, industries are focusing on sensibility aspects of products to meet consumer's needs. The car(?) seat cover fabrics are more closely related to human senses than anything else. This study attempted to investigate which seat cover fabric can give good feeling to consumers and to analyze their characteristics. Twelve kinds of jacquard fabric used for seat cover were selected. The Kawabata Evaluation System was used to measure the mechanical properties of 12 jacquard fabrics, and tactile sensibility(TS), and preference(P) determined by subjective evaluation of 160 participants were also utilized. The stepwise regression analysis was made to select the most significant mechanical properties, and some models for predicting tactile sensibility and preference was developed. The results are briefly summarized as follows: the most important parameter to choose seat cover fabric is a "hygienic property" and the other parameters are 'materials with color fastness', 'compressive property', 'color', 'antibacterial property', 'easy-care property'. The LogSMD, LogB, LC, EM were selected as significant mechanical properties affecting tactile sensibility. Also, the LC, LogB, LogSMD, LogWC, LogMMD were selected as significant mechanical properties affecting preference.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.36-44
• /
• 2005

Nowadays, various kind of rubber-like materials are used in industry. These are usually installed in automobiles, trains, etc. They work as dampers or important parts in the system, and the applications for rubber-like materials are increasing. In the past days, rubber engineers and designers predicted rubber material behaviors by the analytic method for limited problems. With the progress of digital computers, Finite Element Methods is widely used for analyzing the rubber-like materials. The popular methods predicting rubber material property are curve fitting and least square method, but there are some problems such as low precision and tedious solving process. Here, we introduce a method estimating rubber material property by successive zooming genetic algorithm(SZGA). The proposed algorithm offers more precise rubber property. To demonstrate the effectiveness of the proposed algorithm, we compared this method with Haines & Wilson's method, MARC, ABAQUS.

• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.287-293
• /
• 2013

Purpose: This study is to provide basic data of the dental acrylic denture base resin in the mechanical property difference investigation according to the monomer composition weight ratio of the acrylic denture base resin. Methods: The monomer composition of the acrylic denture base resin and weight ratio makes the different specimen. It measured the mechanical property with the specimens through Hardness Test, Tensile Test, Flexural Test, Flexural Modulus, FT-IR Test. Results: The control group Vertex was 18.4 Hv and the experimental group MED was 14.46~19.07Hv in the hardness test. Vertex was 364N, MED-3 was lowest in the tensile strength test and the Head of a family cursor declination was big. The result declination of the experimental specimens showed. Vertex and MED-2 was the highestest in the flexural test and after coming MED-6, MED-5, MED-1, MED-3, MED-4. Vertex and MED-2, as to a spectrum for $500{\sim}1800cm^{-1}$ peak can show the excellent degree of polymerization in the FT-IR Test. Conclusion: The ideal weight ratio of the monomer of the acrylic denture base resin of which the mechanical property is the highestest was MMA 100g, EDGMA 5g, DMA 0.2g, of MED-2.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.17-22
• /
• 2017

Mechanical property of tissue is closely related to diseases such as breast cancer, prostate cancer, cirrhosis of the liver, and atherosclerosis. Therefore measurement of tissue mechanical property is important for a better diagnosis. Ultrasound elastography has been developed as a diagnostic modality for a number of diseases that maps mechanical property of tissue. Optical coherence elastography (OCE) has a higher spatial resolution than ultrasound elastography. OCE, therefore, could be a great help for early diagnosis. In this study, we made tissue phantoms and measured their compressive moduli with a rheometer measuring the response to applied force. Uniaxial strain of the tissue phantom was also measured with OCE by using cross-correlation of speckles and compared with the results from the rheometer. In order to compare stiffness of tissue phantoms by OCE, the applied force should be measured in addition to the strain. We, however, did not use a load cell that directly measures the applied force for each sample. Instead, we utilized one silicone film (called as reference phantom) for all OCE measurements that indirectly indicated the amount of the applied force by deformation. Therefore, all measurements were based on displacement, which was natural and effective for image-based elastography such as OCE.

• Composites Research
• /
• 제35권3호
• /
• pp.121-126
• /
• 2022

Owing to advantages of polymeric materials for hydrogen tank liner like light-weight property and high specific strength, polymer based composites have gained much attention. Despite of many benefits, polymeric materials for fuel cell tank cause problems which is critical to applications as low gas barrier property, and poor processability when adding fillers. For these reasons, improving gas barrier property of polymer composites is required to study for expanding application fields. This work presents impermeable polymer nanocomposites by introducing thin barrier coating using layer by layer (LBL) deposition method. Also, bi-layered and quad-layered nanocomposites were fabricated and compared for identifying relationship between deposition step and gas barrier property. Reduction in gas permeability was observed without interrupting mechanical property and processability. It is discussed that proper coating conditions were suggested when different coating materials and deposition steps were applied. We investigated morphology, gas barrier property and mechanical properties of fabricated nanocomposites by FE-SEM, Oxygen permeation analyzer, UTM, respectively. In addition, we revealed the mechanism of barrier performance of LBL coating using materials which have high aspect ratio.

• 대한가정학회지
• /
• 제36권8호
• /
• pp.51-61
• /
• 1998

This paper discussed the assessment of hand of polyester fabrics changed by alkaline hydrolysis. This study analyzed the relations between the change of mechanical property and the hand value according to the weight loss of polyester fabrics. The results are as follows; Objective hand by KES-FB system, revealed that for tensile properties, as the weight loss increased, WT, RT increased and LT decreased. For bending properties, as the weight loss increased, B and 2HB showed smaller values. For shear properties, as the weight loss increased, G, 2HG and 2HG5 decreased. For surface properties, as the weight loss increased, MIU increased, but MMD and SMD did not show any trend. For compression properties, LC, WC and RC did not show significant differences according to the degree of weight loss. In case of hand value, Koshi(stiffness), Hari(anti-drape stiffness), Kisimi(scrooping feeling) and Shinayakasa(flexibility with soft feeling) showed a meaningful results depending on the degree of weight loss. However, Shari(crispness) and Fukurami(fullness and softness) did not show meaningful result. Koshi, Hari and Shinayakasa are high correlation with tensile property, bendibg property shear properties, thickness and weight. Kisimi is high correlation with tensile property, bending property, thickness and weight. Shari, Fukurami and THV did not show any meaningful difference whth any mechanical properties.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.535-536
• /
• 2006

Researches about micro technology travel lively in these days. Such many researches are concentrated in the field of materials and a process field. But properties of micro materials should be known to give results of research developed into still more. In these various material properties, reliability data such as mechanical, optical, thermal property, etc is the basic property. In this paper, it is measured that is material properties of main BLU(Back Light Unit) components in LCD(Liquid Crystal Display). The pattern shape of prism sheet, diffuser film and reflective plate are measured by variable 3D scanning equipments. It is researched which is the method to measure an optimal 3D pattern shape in each components.

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.769-776
• /
• 2012

본 논문의 유한요소 손상해석기법은 재료 인장물성과 파괴기준을 필요로 한다. 기존에 연구된 재료들은 노치인장 시험결과로부터 하나의 인장물성과 파괴기준을 구할 수 있었다. 그러나 본 논문에서 사용된 cast stainless steel(CF8M)의 경우, 동일한 조건의 노치인장 시험결과들에 분산이 존재하여 해석자에 따라 다른 인장물성과 파괴기준이 구해질 수 있다. 따라서 해석자에 관계없이 일관된 인장물성 및 파괴기준을 구할 수 있는 적절한 절차가 필요하다. 본 논문에서는 노치반경 16mm 의 인장시편 시험결과로부터 평균 인장물성을 구하였고, 이를 유한요소 해석에 적용하여 3 개의 파괴기준을 구하였다. 구해진 인장물성과 파괴기준을 적용하여 J-R 파괴인성 시험에 대한 손상해석을 수행하였고, 시험결과와 비교함을 통해 제시된 절차의 타당성을 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.217-217
• /
• 2009

In this study, the effect of bending strain on the transport property and critical current of lap and butt-jointed BSCCO tapes have been investigated. The samples were joined using a mechanically controlled jointing procedure. In order to ensure a uniform pressure application at the joint part, a single point contact has been devised and also to achieve a uniform thickness at the joint interface.

• Elastomers and Composites
• /
• 제47권4호
• /
• pp.318-328
• /
• 2012

본 연구에서는 blocked isocyanate와 하이브리드 기술을 이용해서 1액 경화형 폴리우레탄 탄성체를 제조하였다. 1액 경화형 하이브리드 폴리우레탄의 제조를 위해서 hydroxyl group을 포함하는 실리카 하이브리드를 합성하고 입자크기, 형태 및 탄성체 내의 하이브리드 입자분포를 확인하였다. 또한, 열해리특성, 기계적 물성, 성형특성을 조사하였다. 1액 경화형 폴리우레탄 탄성체의 열해리 특성을 평가한 결과 온도가 높을수록, 열처리 시간이 길어질수록 blocking된 isocyanate의 해리가 더 잘 진행되었다. 합성된 실리카 하이브리드는 직경이 23~27 nm이고 구형이었으며 하이브리드 폴리우레탄의 단면을 FE-SEM과 EDS를 사용해서 분석한 결과 하이브리드 입자가 폴리우레탄 분자구조 내에 잘 분산되어있는 것을 확인하였다. 하이브리드 폴리우레탄의 경우에는 하이브리드를 포함하지 않는 폴리우레탄 탄성체에 비해 기계적물성, 내마모성 및 열적특성이 향상되었으며 가소제를 사용하는 경우에는 물성의 변화가 거의 없는 것으로 확인되었다.