• Smart Structures and Systems
• /
• 제33권3호
• /
• pp.217-225
• /
• 2024

In this study, an electromagnetic dynamic vibration suppressor and energy harvester is designed and studied. In this system, a gear mechanism is used to convert the linear motion to continuous rotary motion. Governing equations of motion for the system are derived and validated using the experimental results. Effects of changing the main parameters of the presented system, such as mass ratio, stiffness ratio and gear ratio on the electro-mechanical behavior of system are investigated. Moreover, using so-called Weighted Cost Function, the optimum parameters of the system are obtained. Finally, it is shown that the presented electromagnetic dynamic vibration absorber not only can reduce the undesired vibration of the main system but also it can harvest acceptable electrical energy.

• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1210-1215
• /
• 2016

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.296-301
• /
• 2016

Using high magnetic flux from a 60 Hz high-current cable, a 2 W wireless-powered energy harvesting receiver for sensor operation, internet of things (IoT) devices, and LED lights inside electrical cable tunnels is proposed. The proposed receiver comprises a copper coil with a high number of turns, a ring-shaped ferromagnetic core, a capacitor for compensating for the impedance of the coil in series, and a rectifier with various types of loads, such as sensors, IoT devices, and LEDs. To achieve safe and easy installation around the power cable, the proposed ring-shaped receiver is designed to easily open or close using a clothespin-shaped handle, which is made of highly-insulated plastic. Laminated silicon steel plates are assembled and used as the core because of their mechanical robustness and high saturation flux density characteristic, in which the thickness of each isolated plate is 0.3 mm. The series-connected resonant capacitor, which is appropriate for low-voltage applications, is used together with the proposed receiver coil. The concept of the figure of merit, which is the product weight and cost of both the silicon steel plate and the copper wire, is used for an optimized design; therefore, the weight of the fabricated receiver and the price of raw material is 750 gf and USD $2 each, respectively. The 2.2 W powering capability of the fabricated receiver was experimentally verified with a power cable current of $100A_{rms}$ at 60Hz.

• 한국항공우주학회지
• /
• 제44권1호
• /
• pp.40-48
• /
• 2016

관측위성의 고 해상도 임무요구조건 충족을 위해 기계적 구동부를 갖는 탑재장비로부터의 미소진동은 항상 차폐의 대상으로 존재하였다. 본 연구에서는 차폐의 대상이던 미소진동에 주목하여, 전기에너지 재생이 가능하고 동시에 진동절연이 가능한 복합 시스템 구현을 목표로 동조질량 흡진기 형태의 전자기 하베스터와 결합된 수동형 진동절연 시스템을 제안하였다. 아울러 하베스터의 기본특성 측정시험 결과에 기인한 수치해석과 미소진동시험 및 생성전력 측정시험을 통해 본 연구에서 제안한 복합시스템은 미소진동 절연과 동시에 전기에너지 재생에 유효함을 입증하였다.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.453-461
• /
• 2022

A chemically sintered and binder-free paste of TiO₂ nanoparticles (NPs) was prepared using a binary-liquid mixture of 1-octanol and CCl₄. The 1:1 (v/v) complex of CCl₄ and 1-octanol easily interacted chemically with the TiO₂ NPs and induced the formation of a highly viscous paste. The as-prepared binary-liquid paste (P_BL)-based TiO₂ film exhibited the complete removal of the binary-liquid and residuals with the subsequent low-temperature sintering (~150℃) and UV-O₃ treatment. This facilitated the fabrication of TiO₂ photoanodes for flexible dye-sensitized solar cells (f-DSSCs). For comparison purposes, pure 1-octanol-based TiO₂ paste (P_O) with moderate viscosity was prepared. The P_BL-based TiO₂ film exhibited strong adhesion and high mechanical stability with the conducting oxide coated glass and plastic substrates compared to the P_O-based film. The corresponding low-temperature sintered P_BL-based f-DSSC showed a power conversion efficiency (PCE) of 3.5%, while it was 2.0% for P_O-based f-DSSC. The P_BL-based low- and high-temperature (500℃) sintered glass-based rigid DSSCs exhibited the PCE of 6.0 and 6.3%, respectively, while this value was 7.1% for a 500℃ sintered rigid DSSC based on a commercial (or conventional) paste.

• 한국자원식물학회지
• /
• 제35권6호
• /
• pp.785-795
• /
• 2022

Traditional germplasms are unsuitable for mechanized production, limiting adzuki bean production. The creation of cultivars that can be harvested by mechanized means is an urgent task for breeders. The bottom pod height (BPH), lodging resistance, and synchronous maturing of adzuki beans are critical factors for the reduction of losses due to mechanized harvesting. In this study, 14 traits of 806 adzuki bean accessions were analyzed. All growth stages and the yield, lodging score, and synchronous maturing correlated negatively with the BPH. These negative correlations reflect the increased difficulty of breeding to simultaneously satisfy the needs for no lodging, high synchronous maturing rates, BPHs > 10 cm, and high yield. We screened three germplasms with no lodging, high synchronous maturing rates, and BPHs > 10 cm that were used as mechanization-adapted breeding material for crossing with high-yield cultivars. Agronomic trait diversity in adzuki beans was also examined in this study. Principal component and cluster analyses were conducted for 806 germplasms resulting in three clusters with the yield and three growth stage traits serving as the main discriminating factors. Cluster 1 included high-yield germplasms with the number of pods per plant and the number of seeds per pod being the major discriminant factors. Cluster 2 included germplasms with long growth periods and large 100-seed weights while cluster 3 contained germplasms with high BPHs. In general, the characteristics that make mechanical harvesting feasible and those assessed in this study could be utilized to choose and enhance adzuki beans production.

• Wind and Structures
• /
• 제30권3호
• /
• pp.261-273
• /
• 2020

This paper deals with the design, wind tunnel testing, and performance analysis of small wind turbines targeting low-power applications. Three different small-size blade designs in terms of size, shape, and twisting angle are considered and tested. We conduct wind tunnel tests while measuring the angular speed of the rotating blades, the generated voltage, and the current under varying resistive loading and air flow conditions. An electromechanical model is also used to predict the measured voltage and power and verify their consistency and repeatability. The measurements are found in qualitative agreement with those reported in previously-published experimental works. We present a novel methodology to estimate the mechanical torque applied to the wind turbine without the deployment of a torque measuring device. This method can be used to determine the power coefficient at a given air speed, which constitutes an important performance indicator of wind turbines. The wind tunnel tests revealed the capability of the developed wind turbines to deliver more than 1225 mW when subject to an air flow with a speed of 7 m/s. The power coefficient is found ranging between 26% and 32%. This demonstrates the aerodynamic capability of the designed blades to extract power from the wind.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.589-590
• /
• 2013

The fast development of electronic devices towards wireless, portable and multi-functionality desperately needs the self-powered and low maintenance power sources. The possibility to coupling the nanogenerator to wearable and portable electronic device facilitates the self powered device with independent and self sustained power source. Nanogenerator has ability to convert the low frequency mechanical vibration to electrical energy which is utilized to drive the electronic device [1]. The self powered power source has the ability to generate the power from environment and human activity has attracted much interest because of place and time independent. The human body motion based energy harvesting has created huge impact for future self powered electronics device applications. The power generated from the human body motion is enough to operate the future electronic devices. The energy harvesting from human body motion based on triboelectric effect has simple, cost-effective method [2, 3] and meet the required power density of devices. However, its output is still insufficient to driving electronic devices in continues manner so new technology and new device architecture required to meet required power. In the present work, we have fabricated the triboelectric nanogenerator using PDMS polymer. We have studied detail about the power output of the device with respect to different polymer thickness and varied separation distance.

• 한국잠사곤충학회지
• /
• 제40권1호
• /
• pp.8-12
• /
• 1998

The study aimed at development of a riding-type mulberry harvester for mechanical harvest. A riding-type mulberry harvester has been developed to harvest on sloped land with a higher efficiency. It has been implemented over a period of 2 years from 1996 to 1997. The result is as follows. It moves on carterpillar with a level adjusting system. It reduced only from 14.6 hrs to 0.9hrs/10a for cutting in a range of 25 to 80 cm high and possibly used for both spring and autumn. It reduced only the labor requirements of mulberry harvesting by 94 percent, as compared to that of the manual harvest. All related processes, cutting, binding and loading are simultaneously done by this harvester and totally it can reduce 96 percent of the labor requirements, as compared to 20.4 hrs/10a of the manual harvest. The machine compared to improved mulberry harvest efficiency with 11.11a per hour by about 23 times as compared to 0.49a per hour manpower. Cost analysis indicated that the riding-type mulberry harvester saved overall cost by 66 percent from 980,000 won per ha manpower to 330,000 won per ha.

• 한국항공우주학회지
• /
• 제42권8호
• /
• pp.648-653
• /
• 2014

플라이 휠, 구동형 안테나, 기계식 자이로, 냉각기 등과 같이 기계적 구동부를 갖는 탑재장비는 궤도 운용 시 미소진동을 발생한다. 고해상도 관측위성의 영상품질 향상을 위해서는 주로 진동발생원으로부터의 미소진동이 주요 임무장비에 전달되지 않도록 진동절연기의 적용 등 추가적인 기술적 노력들이 요구된다. 본 연구에서는 항상 차폐의 대상으로 여겨진 미소진동에 주목하여 이로부터 전기에너지 재생이 가능하고 동시에 진동절연이 가능한 복합 시스템 구현을 위해 동 흡진기 형 전자기 하베스터와 결합된 수동형 진동절연 시스템을 제안하였으며, 수치해석을 통해 복합 시스템의 유효성을 입증하였다.