• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1099-1108
• /
• 2017

동일한 시험조건에서 반복시험으로부터 얻어진 실험 데이터는 이론적으로 동일한 값을 가져야 한다. 그러나 실제 데이터 결과는 다양한 환경 요소들에 의해 발생하는 오차와 불확실성을 가지게 되어 시험 값이 변동량을 가진다. 이는 정확한 실험 데이터를 얻는데 제한사항이 된다. 본 연구에서는 확률통계 방법을 이용하여 불확실성을 가진 입력변수의 유효범위를 결정하는 알고리즘을 제안하였다. 또한 실제 현장에서 사용되는 볼트 체결 마찰계수 데이터를 이용하여 제안된 알고리즘을 적용하여 불확실성을 내재한 입력변수의 유효범위를 산출하고 이에 대한 신뢰성 평가를 하였다.

• 한국산업융합학회 논문집
• /
• 제15권4호
• /
• pp.117-124
• /
• 2012

Recent years, many industries acknowledge that environmental substantiality of products must be an essential role and it is one of the major importances for industries to consider the environmental impacts of products at the early stages of product development. This study investigated eco-design parameters and $CO_2-eq$. emissions in each stage of raw material acquisition, manufacturing, transportation, use and disuse in life cycle of touch monitor stand based on Eco-Design. In this study, to fulfill of Eco-Design, the environmental impact assessment of through LCA(Life cycle assessment) was carried out with benchmarking monitor stand and we suggested the direction of new design of touch monitor stand mechanism based on eco-friendly considerations. New design based on LCT(Life Cycle Thinking) showed that the following eco-friendly considerations at the early stage of design to be helpful to reduce GWP(Global Warming Potential) [kg $CO_2-eq$.] in new monitor stand development and it is necessary for Eco-Design process of the product.

• 사물인터넷융복합논문지
• /
• 제6권1호
• /
• pp.73-81
• /
• 2020

클라우드 컴퓨팅을 사용하는 사물 인터넷 (IoT)은 원자력 발전소 사고가 안전성 평가를 위해 분석되는 원자력 산업에 적용된다. 후쿠시마 원자력 발전소 사고는 지진으로 인한 플랜트 고장 사고가 클라우드 컴퓨팅 기술 분석에 사용되는 사고 시뮬레이션을 위해 모델링되었습니다. 후쿠시마의 경우 자연 재해에 대한 빠르고 합리적인 치료가 필요했다. 실시간 안전 평가 (RTSA)와 몬테카를로 실시간 평가 (MCRTA)가 구성된다. 이 클라우드 컴퓨팅은 미래의 유사한 사고에 대비할 수있는 실용적인 방법을 제공 할 수 있습니다.

• 대한기계학회논문집A
• /
• 제28권10호
• /
• pp.1483-1491
• /
• 2004

To assess the integrity of the pipeline is the most important problem to be solved first of all for prevention of any fracture accident of the pipeline. As a result of exerting such efforts, a number of plastic collapse assessment equations have been suggested, however, the scope of using or applying such assessment equations has not been exactly defined. In this study, the case that a surface crack existed in the circumferential direction in the external side of the natural gas pipeline and a bending load was applied to the pipeline was analytically identified as the most critical condition, and a plastic collapse assessment equation fur it was suggested. The flow stress of the API X65 linepipe was defined through the experiment conducted on SENT specimens. Also, a local assessing criterion of a 3-dimensional crack behavior considering not only the crack depth but also the crack length was suggested. Finally, a plastic collapse assessment equation for the API X65 linepipe was developed by performing the 3-dimensional finite element analysis.

• Journal of Welding and Joining
• /
• 제25권1호
• /
• pp.63-69
• /
• 2007

Once assessment of material failure characteristics is captured precisely in a unified way, it can bedirectly incorporated into the structural failure assessment under various loading environments, based on the theoretical backgrounds so called Local Approach to Fracture. The aim of this study is to develop a numerical fatigue test method by continuum damage mechanics applicable for the assessment of structural integrity throughout crack initiation and structural failure based on the Local Approach to Fracture. The generalized elasto-visco-plastic constitutive equation, which can consider the internal damage evolution behavior, is developed and employed in the 3-D FEA code in order to numerically evaluate the material and/or structural responses. Explicit information of the relationships between the mechanical properties and material constants, which are required for the mechanical constitutive and damage evolution equations for each material, are implemented in numerical fatigue test method. The material constants selected from constitutive equations are used directly in the failure assessment of material and/or structures. The performance of the developed system has been evaluated with assessing the S-N diagram of stainless steel materials.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.30-35
• /
• 2013

This paper describes the assessment method of deterioration condition for a power transformer using SFRA. Frequency Response Analysis(FRA) is a method to evaluate the mechanical and geometrical integrity of the core and windings within a power transformer by measuring the electrical transfer functions over a wide frequency range. SFRA is sweep frequency response analyzer for power transformer winding diagnosis. The FRA is a comparative method, that evaluates the transformer condition by comparing the obtained set of FRA results to reference results on the same, or a similar, unit. FRA techniques were widely used and much more sensitive than the traditional and internationally accepted method of impedance measurements, but that work was required on standardization and interpretation. In order to analyze the deterioration condition for power transformer, overvoltage test and mechanical distortion test were carried out. The deterioration condition for power transformer was evaluated by SFRA. It is intended to present the elemental technology of assessment method for power transformer using SFRA.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.349-362
• /
• 2018

This paper presents a semi-analytical solution for the creep analysis and life assessment of 304L austenitic stainless steel thick truncated conical shells using multilayered method based on the first order shear deformation theory (FSDT). The cone is subjected to the non-uniform internal pressure and temperature gradient. Damages are obtained in thick truncated conical shell using Robinson's linear life fraction damage rule, and time to rupture and remaining life assessment is determined by Larson-Miller Parameter (LMP). The creep response of the material is described by Norton's law. In the multilayer method, the truncated cone is divided into n homogeneous disks, and n sets of differential equations with constant coefficients. This set of equations is solved analytically by applying boundary and continuity conditions between the layers. The results obtained analytically have been compared with the numerical results of the finite element method. The results show that the multilayered method based on FSDT has an acceptable amount of accuracy when one wants to obtain radial displacement, radial, circumferential and shear stresses. It is shown that non-uniform pressure has significant influences on the creep damages and remaining life of the truncated cone.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.167-175
• /
• 2006

Directional stability is important performance in vehicle and tire design. The current methods to analyze this is generally based on linear concept. Using the existing concept, it cannot realistically explain the subjective assessment at all because it is hard to practically represent the nonlinear behaviour of a complex vehicle system in reality. In this paper, new method to analyze directional stability is introduced. At first, directional stability of vehicle is categorized into yaw, rear axle, and roll stability. In order to objectify these items, driver perceptual parameters based on subjective assessment are used. Using the perceptual parameters, it can successfully explain the transient maneuver of vehicle and extract objective parameters for directional stability. Finally, these objective parameters are successfully validated through two handling tests, lane change and severe lane change. The correlation results show that there exists a good correlation between subjective assessment and the proposed objective parameters.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.646-655
• /
• 1990

본 연구에서는 EPIES 프로그램의 상세한 내용과 이를 이용한 5가지 파괴역학 시편에 대한 사례 연구에 대하여 보고하고자 한다.

• 한국터널지하공간학회 논문집
• /
• 제4권1호
• /
• pp.13-25
• /
• 2002

영동터널의 굴착공법은 다음과 같은 세밀한 위험도 분석기법을 통하여 결정되었다. 본 논문에서는 실드 TBM 과 같은 형태의 기계화 굴착공법과 천공 및 발파에 의한 굴착공법에 따른 공사중 특정의 위험도를 분석 하였다. 공사 민감도 및 현장 경험등의 기타 중요인자를 고려한 위험도 분석결과에 따라 본 현장여건을 고려하면 천공 및 발파공법이 영동선 터널의 굴착공법으로 가장 적합하다고 제안 되었다.