• 기본간호학회지
• /
• 제26권2호
• /
• pp.136-143
• /
• 2019

Purpose: The feasibility and differential effects of two music therapy methods (interventions with preferred music vs. classical relaxation music) were done to examine the effects on agitation and anxiety in patients weaning off mechanical ventilation. Methods: This pilot study was conducted using a crossover design. Six patients listened to preferred music choices and classical relaxation music. Anxiety scores were measured using the Richmond Agitation Sedation Scale (RASS), State-Trait Anxiety Inventory (STAI), and visual analog scale (VAS). Results: Patients showed a significant decrease in agitation and anxiety after both the preferred and classical relaxation music interventions. The difference in the effects of preferred music and that of classical relaxation music was not significant. As for feasibility, patients exhibited a change in agitated behaviors after the music interventions by not trying to take off medical devices and quietly listening to the music, and by smiling and moving lips along with the lyrics while listening. Conclusion: Music interventions which centered on either patients' preferences or classical relaxation music to enhance relaxation, helped reduce agitation and anxiety during the mechanical ventilation weaning process.

• Molecules and Cells
• /
• 제28권6호
• /
• pp.515-520
• /
• 2009

Applications of bone marrow-derived mesenchymal stem cells in gene therapy have been hampered by the low efficiency of gene transfer to these cells. In current transduction protocols, retrovirus particles with foreign genes make only limited contact with their target cells by passive diffusion and have short life spans, thereby limiting the chances of viral infection. We theorized that mechanically agitating the virus-containing cell suspensions would increase the movement of viruses and target cells, resulting in increase of contact between them. Application of our mechanical agitation for transduction process has increased the absorption of retrovirus particles more than five times compared to the previous static method without changing cell growth rate and viability. The addition of a mechanical agitation step increased transduction efficiency to 42%, higher than that of any other previously-known static transduction protocol.

• Journal of Mechanical Science and Technology
• /
• 제19권3호
• /
• pp.860-869
• /
• 2005

Local pool boiling on the outside and inside surfaces of a 51 mm diameter tube in horizontal direction has been studied experimentally in saturated water at atmospheric pressure. Much variation in local heat transfer coefficients was observed along the tube periphery. On the outside surface the maximum and the minimum are observed at ${\theta}=45^{\circ}$ and $180^{\circ}$, respectively. However, on the inside surface only the minimum was observed at ${\theta}=0^{\circ}$. Major mechanisms on the outside surface are liquid agitation and bubble coalescence while those on the inside surface are micro layer evaporation and liquid agitation. As the heat flux increases liquid agitation gets effective both on outside and inside surfaces. The local coefficients measured at ${\theta}=90^{\circ}$ can be recommended as the representative values of both outside and inside surfaces.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.197-201
• /
• 2003

In this study, Ni-P layers were electroplated on the surface of stainless steel in order to investigate the effects of an additive and agitation on their mechanical properties and microstructure. The concentration of the additive in the plating solution increased, the pores formed in the layer decreased, while the residual stress developed in the layers during electroplating increased. Agitation of the solution during electroplating was observed to force to increase local pores in the layer, which lowers its tensile properties. Grain growth was suppressed due to very fine $Ni_3P$ precipitates formed at its grain boundaries during heat treatment at $343^{\circ}C$ for 1 hr in air.

• 대한간호학회지
• /
• 제54권1호
• /
• pp.32-43
• /
• 2024

Purpose: This study aimed to determine the impact of an intervention using voice recording of family members on pain, anxiety, and agitation in patients undergoing weaning from mechanical ventilation. Methods: A randomized control pre-post experimental design was implemented to 53 participants, with 27 and 26 participants in the experimental and control groups, respectively. A 70-second voice recording of a family member, repeated three times at 10-minute intervals was used as an intervention for the experimental group. Meanwhile, participants in the control group used headset for 30 minutes. Structured instruments were utilized to measure pain, anxiety, agitation, and the weaning process. Wilcoxon Signed Ranks test and the Mann-Whitney U test, or χ² test, were used for data analysis. Results: The experimental group exhibited significant decrease in pain (Z = - 3.53, p < .001), anxiety (t = 5.45, p < .001), and agitation (Z = - 2.99, p = .003) scores compared with those of the control group. However, there was no significant difference between groups in the weaning process' simplification (χ² = 0.63, p = .727). Conclusion: Intervention using family members' voice recording effectively reduces pain, anxiety, and agitation in patients undergoing weaning from mechanical ventilation. This can be actively utilized to provide a more comfortable process for patients.

• 대한환경공학회지
• /
• 제34권3호
• /
• pp.143-148
• /
• 2012

본 연구는 퇴비화 공정에서 발생되는 배출가스 내 생물학적 인자의 발생 특성을 파악하기 위하여 퇴비단 온도변화에 따른 부유세균과 내독소의 발생농도를 관찰하였다. 실험은 도시하수슬러지를 대상으로 실험실 규모의 기계적 교반이 가능한 퇴비화 장치(반응기 부피 0.06 $m^3$)에서 실시되었다. 부유세균은 미교반 퇴비화 공정에서 퇴비단 온도변화와 유사한 발생경향을 보였지만 통계적 유의성이 다소 낮았고(p>0.05), 최고 발생농도는 $1.03{\times}10^5\;CFU/m^3$이었다. 내독소는 기계교반 퇴비화 공정에서 퇴비단의 온도변화와 유사한 발생경향을 보였으며(통계적 유의성: p<0.05), 최고 발생농도는 1,415 EU/$m^3$이었다. 퇴비화 공정의 기계적 교반이 퇴비단 미생물의 활성과 이에 따른 배출가스 중 내독소 발생 증가에 영향을 미친 것으로 보인다. 내독소의 발생농도와 부유세균의 발생농도는 유사한 발생 경향을 보였으며, 특히 미교반 퇴비화공정에서 높은 통계적 상관성이 나타났다(통계적 유의성: p<0.01).

• 자원리싸이클링
• /
• 제27권1호
• /
• pp.45-54
• /
• 2018

플라이애시의 부유선별 과정에서 교반속도와 공기주입량과 같은 기계적 요소 변화에 따른 영향을 알아보고자 본 연구를 실시하였다. 본 연구에서는 미연탄소 함량이 약 3.4 ~ 3.7% 수준인 화력발전소 플라이애시를 사용하였다. 대표적인 부유선별의 선별 요소인 pH, 교반속도, 포수제 첨가량, 기포제 첨가량 변화에 따른 영향을 살펴보았을 때, Safflower oil을 포수제로 사용하여 첨가량을 800 g/ton, pH 7, 교반속도 1,200 rpm, 기포제 첨가량이 400 g/ton였을 때, 미연탄소 회수율과 미연탄소 함량이 각각 63%, 34%로 나타났다. 이 때 부상물 SEM/EDS 분석을 통해 알아본 결과, 구형의 플라이애시 미립자가 미연탄소 내에 고용되거나, 광액 내에 가라앉지 못하고 기포와 함께 부유함으로써 미연탄소의 함량을 낮추는 것으로 나타났다. 교반속도와 공기주입량과 같은 기계적 요소를 변화시킨 실험에서는 공기주입량 8L/min, 교반 속도 900 rpm에서 미연탄소 회수율 74%, 미연탄소 함량 67%인 것으로 나타났다. 이는 낮은 교반속도와 추가 공기주입으로 인하여 광액 내 와류의 강도가 낮아져, 미립의 플라이애시 입자가 미연탄소와 함께 부유되는 현상을 방지됨으로써, 미연탄소 회수율과 미연탄소 함량이 향상된 것으로 나타났다. 또한, 교반속도와 공기주입량을 각각 800 rpm, 6 L/min으로 설정하였을 때 미연탄소 회수율과 미연탄소 탄소함량이 각각 80%, 70%로 향상되어 가장 우수한 것으로 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.271-275
• /
• 2008

The MAM(Megasonic Agitated Module) has been fabricated for improving the characteristics of wet etching. The characteristics of the MAM are investigated during the wet etching with and without megasonic agitation in this paper. The adoption of the MAM has improved the characteristics of wet etching, such as the etch rate, etch uniformity, and surface roughness. Especially, the etching uniformity on the entire wafer was less than ${\pm}1%$ in both cases of Si and glass. Generally, the initial root-mean-square roughness($R_{rms}$) of the single crystal silicon was 0.23nm. Roughnesses of 566nm and 66nm have been achieved with magnetic stirring and ultrasonic agitation, respectively, by some researchers. In this paper, the roughness of the etched Si surface is less than 60 nm. Wet etching of silicon with megasonic agitation can maintain nearly the original surface roughness during etching. The results verified that megasonic agitation is an effective way to improve etching characteristics of the etch rate, etch uniformity, and surface roughness and that the developed micromachining system is suitable for the fabrication of devices with complex structures.

• Journal of Animal Science and Technology
• /
• 제46권2호
• /
• pp.283-294
• /
• 2004

본 연구는 환기 방식 및 교반 유무에 따른 축분 퇴비화 시스템 내 대기 및 작업 환경을 평가하기 위해 수행되었다. 측정대상 가스상 물질인 암모니아, 황화수소, 악취농도의 경우 자연환기-미교반시 2.45ppm, 19.96ppb, 15.8, 강제환기-미교반시 7.61ppmm 31.36ppb, 30.2, 자연환기-교반시5.50ppm, 14.69ppb, 46.4, 강제교화기- 교반시 30.12ppm, 39.91ppb, 205.5가 평균적으로 발생되는 것으로 분석되었다. 각 운용조건에 따른 흡입성 분진과 호흡성 분진의 평균 농도는 자연환기-미교반시 368.6${\mu}g$/$m^3$,96.0${\mu}g$/$m^3$, 강제화기-미교반시 283.9${\mu}g$/$m^3$, 119.5${\mu}g$/$m^3$, 자연환기-교반시 208.7${\mu}g$/$m^3$, 139.8${\mu}g$/$m^3$, 강제환기-교반시 209.2${\mu}g$/$m^3$, 131.7${\mu}g$/$m^3$인 것으로 조사되었다. 총 부유 박테리아와 곰팡이의 경우 자연환기-미교반시 28,673cfu/$m^3$, 22,507cfu/$m^3$, 강제환기-미교반시 7,462cfu/$m^3$,3,229cfu/$m^3$, 자연환기-교반시 19,592cfu/$m^3$, 26,376.29cfu/$m^3$, 강제환기-교반시 18,645cfu/$m^3$, 24,581cfu/$m^3$가 평균적으로 발생되는 것으로 분석되었다. 대체로 가스상 물질은 자연환기와 교반을 하지 않는 경우보다 강제환기와 교반을 하는 경우에 더 많이 발생되는 경향을 보였다. 또한 흡입성 분진과 총 부유박테리아의 경우, 자연환기-미교반시에 대체로 더 높게 발생된 반면, 호흡성 분진과 총 부유곰팡이의 경우 강제환기-교반시에 더 많이 발생되는 경향을 보였다. 내부 온도와 상대습도는 입자상 물질과 생물학상 오염물질 발생에 영향을 주는 것으로 분석되었고, 암모니아와 황화수소는 축분 퇴비화시 발생되는 악취 원인물질로 입증되었다. 물리적 요인인 온도와 상대습도는 축분 퇴비화 시스템내에서 주로 입자상 오염물질과 생물학상 오염물질의 발생량에 영향을 미치는 주요인자로 입증되었는데, 시스템 내부 온도와 상대습도가 높으면 이것들의 농도도 높아지는 것으로 분석되었다.

• 한국표면공학회지
• /
• 제34권4호
• /
• pp.289-296
• /
• 2001

Ni-P electroformed layers were investigated for developing a steam generator tube repair technology in PWRs. The effects of an additive, RPP (Reagent over Pitting Protection) and agitation on mechanical properties and microstructure of the layer were evaluated. The addition of the RPP showed to inhibit the formation of pores, to refine the grain size, and to increase the residual stress in the layer. However, the agitation of the solution during electroforming was observed to increase pores in local regions of the electroformed layer, resulting in decreasing its mechanical properties. The heat treatment of the layer at $343^{\circ}C$ for 1 hr. precipitated the very fine particles of Ni3P in the layer, which inhibited grain growth and increased microhardness.