• 전기학회논문지P
• /
• 제60권2호
• /
• pp.82-90
• /
• 2011

The small precision spindle motors in the high value-added products including the visible home appliances such as DLP projector require not only the energy conversion devices but also high efficiency, low vibration and sound operation. However, the spindle motors using the conventional ball bearing and sintered porous metal bearing have following problems, respectively: the vibration by the irregularity of balls and the short motor life cycle by the ball's abrasion and higher sound noises by dry contact between shaft and sleeve. In this paper, it is proposed that the spindle motor with a fluid dynamic bearing is suitable for the motor to drive the color wheel of the DLP(digital lightening processor) in the visible home appliances. The proposed spindle motor is composed of the fluid dynamic bearing with both the radial force and the thrust force. The fluid dynamic bearing is solved by the finite element analysis of the mechanical field with the Reynolds equations. The magnetic part of spindle motor, which is a type of Brushless DC Motor, is designed by the electro-magnetic field analysis coupled with the Maxwell equation. And the load capacity and the friction loss of fluid dynamic bearing are analyzed to bearing clearance variation by the fabrication error in designed motor. The design of the proposed motor is implemented by the load torque caused by the eccentricity and the unbalance of the fluid dynamic bearing when the motors are fabricated in error. The prototype of the motor with the fluid dynamic bearing is manufactured, and experiment results show the vibration, sound, and phase current at no load and color wheel load of the motors in comparison. The high performance characteristics with the low vibration, the low acoustic noise and the optimal mechanical structure are verified by the experimental results.

• 한국세라믹학회지
• /
• 제54권4호
• /
• pp.292-297
• /
• 2017

${\beta}-SiAlON$, based on its high fracture toughness, good strength and low abrasion resistance, has been adopted in several industrial fields such as bearings, turbine blades and non-ferrous metal refractories. In general, ${\beta}-SiAlON$ is fabricated by reactive sintering using expensive $Si_3N_4$ and AlN as starting materials. On the other hand, in this study, a cheaper ${\beta}-SiAlON$ starting powder synthesized by SHS was employed to improve price competitiveness compared to that of the reactive sintering process. ${\beta}-SiAlON$ ceramics with various content of the sintering additive $Y_2O_3$ up to 7 wt% were fabricated by conventional pressureless sintering at $1800^{\circ}C$ for 2 to 8 h under $N_2$ pressure of 0.1 MPa. The specimen with 3 wt% $Y_2O_3$ exhibited the best mechanical properties: hardness of 14 GPa, biaxial strength of 830 MPa, fracture toughness of $5MPa{\cdot}m^{1/2}$ and wear rate of about $3{\times}10^{-6}mm^3/N{\cdot}m$.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1663-1668
• /
• 2011

자동차 차체를 제작하는 프레스 금형의 가공공정 중 제품의 형태를 완성하는 드로잉 공정 및 불필요한 부분을 절단하는 트리밍 공정은 그 공정의 특성상 금형의 마모가 심하기 때문에 금형의 내마모성을 향상시키기 위한 표면경화처리가 요구되고 있다. 따라서 본 연구에서는 프레스 금형에 레이저 표면처리기술을 적용하기 위한 실험을 실시하였다. 드로잉 공정 및 트리밍 공정에 적합한 표면경화처리를 위해 다이오드 레이저를 이용하여 시험편의 평면부 및 모서리부를 열처리하였으며, 각각의 적정 열처리 조건을 도출하였다. 또한 시험편의 재료에 따른 열처리 특성을 비교하기 위해 구상흑연 및 편상흑연 주철을 사용하여 실험을 진행하였다. 실험 결과, 재료에 따른 열처리 특성에 차이가 있다는 것을 확인하였으며, 적정 열처리된 조건에서의 경화부는 모재에 비하여 약 3배 정도의 경도상승을 나타내었다.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.239-245
• /
• 2003

The occurrence and pattern of tooth wear are related to cultural, dietary, occupational, and geographic factors, Excessive occlusal wear can result in pulpal exposure, occlusal disharmony, functional inability. Surface loss can be differentiated into 3 general causal categories: i) mechanical loss, which includes attrition, ii) abrasion chemical loss including erosion, and finally iii) a proposed biomechanical category described as abfraction. Considering that mechanical wear is frequently asymptomatic, patients may have parafunctional habit. Structured clinical decision analysis in fixed prosthodontics, as other branches of dentistry do, allows the practitioner to consider the patient's problems more thoroughly based on the clinical data and extenuation factors. This discipline of decision making is intended to complement the experience level and educational background of the clinician in assisting the patient through the decision process. Additionally, CDA helps the clinician define not only the pre-existing condition of the patient prior to irreversible therapy, but also better treatment strategies for the patient over an extended period. The systematic nature of decision analysis stimulates the dentists to pay further attention to those factors, which is germane to the overall complexity of the case, and exclude factors, which have little influence on its final outcome. Further implementation of computerized databases, procedural outcome probabilities based on clinical and laboratory studies and the clinical experience of those who use it, may provide quite a promising future in the field of structured and formalized clinical decision analysis.

• 접착 및 계면
• /
• 제19권2호
• /
• pp.55-59
• /
• 2018

본 연구는 신발의 겉창인 고무 접착공정에서 버핑, 산, 알칼리 프라이머 전처리 공정을 생략하여 공정의 간소화로 생산 효율을 높이기 위해 수용성염을 포함하는 고무에 대한 접착특성과 기계적 특성을 고찰하였다. 산성염, 염기성염, 중성염을 평가한 결과, 염기성염을 포함된 고무 성형물의 경우 수성 접착제에 대해 우수한 접착효과를 보였다. 이는 염기성염이 하이드로옥시염으로 존재함에 따라 고무표면이 친수화 되면서 수성접착제에 우수한 접착효과를 보였다. 이것은 접촉각 및 IR측정으로 확인할 수 있었다. 또한, 염기성염이 포함된 고무 성형물의 경우 가교밀도가 증가되어 마모 특성 및 경도는 증가하지만 가교시간을 지연시키는 요인으로 작용하였다.

• Structural Engineering and Mechanics
• /
• 제84권1호
• /
• pp.17-33
• /
• 2022

An experimental study is carried out to investigate the performance of the cutting tool regarding the insert wear, surface roughness, cutting forces, cutting power and material removal rate of three coated carbides GC2015 (TiCN-Al₂O₃-TiN), GC4215 (Al₂O₃-Ti(C,N)) and GC1015 (TiN) during the dry turning of AISI4140 steel. For this purpose, a Taguchi design (L₉) was adopted for the planning of the experiments, the effects of cutting parameters on the surface roughness (R_a), tangential cutting force (F_z), the cutting power (P_c) and the material removal rate (MRR) were studied using analysis of variance (ANOVA), the response surface methodology (RSM) was used for mathematical modeling, with which linear mathematical models were developed for forecasting of R_a, F_z, P_c and MRR as a function of cutting parameters (V_c, f, and a_p). Then, Multi-Objective Ant Lion Optimizer (MOALO) has been implemented for multi-objective optimization which allows manufacturers to enhance the production performances of the machined parts. Furthermore, in order to characterize and quantify the flank wear of the tested tools, some machining experiments were performed for 5 minutes of turning under a depth of 0.5 mm, a feed rate of 0.08 mm/rev, and a cutting speed of 350 m/min. The wear results led to a ratio (V_B-GC4215/V_B-GC2015) of 2.03 and (V_B-GC1015/V_B-GC2015) of 4.43, thus demonstrating the efficiency of the cutting insert GC2015. Moreover, SEM analysis shows the main wear mechanisms represented by abrasion, adhesion and chipping.

• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.274-280
• /
• 2022

There is a problem that semiconductor probe pin has a short lifespan. In order to solve this problem, Ti having excellent conductivity was doped to tetrahedral amorphous carbon (ta-C) having excellent hardness and abrasion resistance. This experiment was planned through the Taguchi robust design to determine the effect of the control factor of the ta-C:Ti coating film. The effect and contribution of control factors such as Unbalanced Magnetron Sputter(UBM) discharge current, arc discharge current, temperature, and bias voltage on ta-C:Ti characteristics were analyzed from the perspective of electrical and mechanical characteristics. The UBM discharge current was set to 4, 6, and 8 A. The main control factor of thickness and resistance is the UBM discharge current, and the thickness increased and the resistance decreased as the current increased. The decrease in resistance is due to the increase in the Ti content of the ta-C:Ti coating film. The arc discharge current was set to 60, 80, and 100 A. The main control factor of hardness and wear is the arc discharge current, and as the current rises, the hardness increases and the wear area decreases. This is due to the increased ta-C content of the ta-C:Ti coating film. Since resistance and wear are important for Probe Pin, the optimal level is set from the perspective of resistance and wear and a confirmation experiment is conducted.

• 한국재료학회지
• /
• 제33권8호
• /
• pp.337-343
• /
• 2023

3Y-TZP (3 mol% yttria-stabilized tetragonal zirconia polycrystals) ceramics have excellent mechanical properties including high fracture toughness, good abrasion resistance as well as chemical and biological stability. As a result, they are widely used in mechanical and medical components such as bearings, grinding balls, and hip implants. In addition, they provide excellent light transmittance, biocompatibility, and can match tooth color when used as a dental implant. Recently, given the materials' resemblance to human teeth, these ceramics have emerged as an alternative to titanium implants. Since the introduction of CAD/CAM in the manufacture of ceramic implants, they've been increasingly used for prosthetic restoration where aesthetics and strength are required. In this study, to improve the surface roughness of zirconia implants, we modified the 3Y-TZP surface with a biocomposite of hydroxyapatite and forsterite using room temperature spray coating methods, and investigated the mixed effect of the two powders on the evolution of surface microstructure, i.e., coating thickness and roughness, and biological interaction during the in vitro test in SBF solution. We compared improvement in bioactivity by observing dissolution and re-precipitation on the specimen surface. From the results of in vitro testing in SBF solution, we confirmed improvement in the bioactivity of the 3Y-TZP substrate after surface modification with a biocomposite of hydroxyapatite and forsterite. Surface dissolution of the coating layer and the precipitation of new hydroxyapatite particles was observed on the modified surface, indicating the improvement in bioactivity of the zirconia substrate.

• 한국산업보건학회지
• /
• 제33권1호
• /
• pp.19-33
• /
• 2023

Objectives: The purpose of this study is to systematically identify situations where exposure levels are expected to be high by structuring domestic lead measurement data according to exposure processes and activities. Methods: Occupational exposure data on lead was collected from the results of the Evaluation of Reliability of Working Environment Measurement conducted by the government from 2019 to 2020. Lead exposure characteristics were analyzed by PROC (process category) and activity. The Risk Characterization Ratios (RCRs) of five PROCs according to ventilation type and lead content were evaluated using the MEASE (Metal's EASE) model. Results: The exposure data on lead (n=250) was classified into 12 PROCs and 12 activities, with an average concentration of 0.040 mg/m³ and about 14% exceeding the occupational exposure limit of 0.05 mg/m³. Processes with high exposure levels were PROC 7 (industrial spraying), 23 (open processing and transfer operations of molten metal), 24 (mechanical treatment), 25 (welding), and 26 (handling of powder containing lead). The results of evaluating RCR for the five PROCs were greater than 1 or close to 1 even if local exhaust ventilation was used. Conclusions: There is a possibility that the concentration of exposure is high in the casting and tapping of molten metal containing lead, mechanical treatment such as fracturing and abrasion, handling of powder, spraying, battery manufacturing, and waste battery recycling processes. It is necessary to implement chemical management policies for workplaces with such processes.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권1호
• /
• pp.119-127
• /
• 2014

본 연구에서는 유황폴리머에멀젼 (SPE)을 반강성 포장용 주입재의 아크릴레이트 대체재로서 활용가능성과 성능향상재료 (PVA섬유)에 대한 역학적 성능과 내구성능을 평가하였다. 평가결과, 반강성 포장재의 충전률은 섬유의 혼입률이 증가함에 따라 충전률이 저하되었지만, 모든 배합조건에서 평균 92~94%로 측정되어 목표 성능인 90%를 만족하였다. 반강성 포장재의 마샬안정도 값은 최대 25.4kN으로 측정되어 반강성 포장재의 국내 기준인 5.0 kN 보다 약 4.7배 우수한 것으로 나타났다. 반강성 포장재의 동적안정도 평가결과, 휠 트래킹시험에 따른 변형저항성은 SPE를 대체한 배합조건이 보다 우수하였고, 모든 배합조건에서 45분 이후에는 변형량이 일정한 값에 수렴되어 동적안정도가 31,500회/mm로 동일한 결과를 나타내었다. 파단변형률은 최대 0.53% 정도로 나타나 아스팔트 포장재보다 우수한 강성으로 나타났다. 마모저항성 및 충격저항성 검토결과 모든 배합조건에서 손실률이 9.8~6.0%로 나타나 우수한 내마모성을 나타내었으며, 섬유를 0.3% 혼입한 경우 혼입하지 않은 Plain에 비하여 2.82배의 내충격성 향상을 나타내었다. 역학적성능 및 내구성능 등을 모두 고려하여 볼 때, 이 연구 범위에서는 SPE 대체율 30%가 적정 수준이고, 혼입률 0.3% 범위에서 PVA 섬유를 적용하면 우수한 인성을 갖는 반강성 포장재 제조가 가능 할 것으로 판단된다.