• Food Science of Animal Resources
• /
• v.38 no.3
• /
• pp.580-592
• /
• 2018

The formulation of an oil/water (o/w) emulsion made up of a mixture of perilla oil and canola oil (30/70 w/w) was optimized using a response surface methodology to find a replacement for animal fat in an emulsion-type meat product. A 12 run Plackett-Burman design (PBD) was applied to screen the effect of potential ingredients in the (o/w) emulsion, including polyglycerol polyricinoleate (PGPR), fish gelatin, soy protein isolate (SPI), sodium caseinate, carrageenan (CR), inulin (IN) and sodium tripolyphosphate. The PBD showed that SPI, CR and IN showed promise but required further optimization, and other ingredients did not affect the technological properties of the (o/w) emulsion. The PBD also showed that PGPR played a critical role in inhibiting an emulsion break. The level of PGPR was then fixed at 3.2% (w/w total emulsion) for an optimization study. A central composite design (CCD) was applied to optimize the addition levels of SPI, CR or IN in an (o/w) emulsion and to observe their effects on emulsion stability, cooking loss and the textural properties of a cooked meat emulsion. Significant interactions between SPI and CR increased the cooking loss in the meat emulsion. In contrast, IN showed interactions with SPI leading to a reduction in cooking loss. Thus, CR was also removed from the formulation. After optimization, the level of SPI (4.48% w/w) and IN (14% w/w) was validated, leading to a perilla-canola oil (o/w) emulsion with the ability to replace animal fat in an emulsion-type meat products.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.910-917
• /
• 2010

Makgeolli lees is a jigaemi by product produced by makgeolli brew processing. Jigaemi has high fiber content and therefore can potentially be used in the development of foods rich in dietary fiber. The effects of makgeolli lees fibers on the composition and physico-chemical properties of chicken emulsion systems were studied. The moisture and ash contents, yellowness, and viscosity of chicken meat emulsion systems with makgeolli lees fiber were all higher than those of control. Moreover, chicken batters supplemented with makgeolli lees fiber were characterized by lower cooking loss and better emulsion stability. Chicken emulsion systems with makgeolli lees fiber also had improved emulsion stability and emulsion viscosity, and the best results were obtained with meat batter containing 2% makgeolli lees fiber.

• Food Science of Animal Resources
• /
• v.39 no.2
• /
• pp.286-295
• /
• 2019

Red pepper seed (RPS) is commonly removed during the production of red pepper powder, which is contains large amounts of dietary fibers and is abundant in nutrients, readily available. In this study, we determined the effects of adding RPS powder on the physicochemical properties of emulsified meat products. Meat emulsion samples were prepared with pork hind leg meat (60%) and back fat (20%), iced water (20%), various additives, and RPS powder at different concentrations [0% (control), 1%, 2%, 3%, and 4%]. For the physicochemical properties, moisture and fat content, pH value, color, emulsion stability, cooking yield, appearance viscosity, and textural properties were examined. Addition of RPS induced significantly higher values in moisture content, pH, cooking yield, and a* values of the meat emulsion samples, regardless of the amount added. However, lower values were obtained for emulsion stability, cooking yield, and viscosity in samples with RPS powder at 3% or 4% among all groups. In general, addition of RPS powder at 1% and 2% led to the greatest values in viscosity of the meat emulsion samples. Higher values (p<0.05) in hardness and springiness were observed in samples with RPS powder at 4% and 3%, respectively. For gumminess, chewiness, and cohesiveness, the addition of RPS powder at 1%, 2%, and 3% induced the highest values (p<0.05) in the meat emulsion samples. These results showed that addition of RPS powder at optimum levels (2%) could be utilized to improve quality properties of emulsified meat products as a non-meat ingredient.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.315-324
• /
• 2018

The objective of this study was to evaluate the efficacy of alkaline-treated sugarcane bagasse fiber on physicochemical and textural properties of meat emulsion with different fat levels. Crude sugarcane bagasse fiber (CSF) was treated with calcium hydroxide ($Ca(OH_2)$) to obtain alkaline-treated sugarcane bagasse fiber (ASF). The two types of sugarcane bagasse fiber (CSF and ASF) were incorporated at 2% levels in pork meat emulsions prepared with 5%, 10% and 20% fat levels. Alkaline-treatment markedly increased acid detergent fiber content (p=0.002), but significantly decreased protein, fat, ash and other carbohydrate contents. ASF exhibited significantly higher water-binding capacity, but lower oil-binding and emulsifying capacities than CSF. Meat emulsions formulated with 10% fat and 2% sugarcane bagasse fiber had equivalent cooking loss and textural properties to control meat emulsion (20% fat without sugarcane bagasse fiber). The two types of sugarcane bagasse fiber had similar impacts on proximate composition, cooking yield and texture of meat emulsion at the same fat level, respectively (p>0.05). Our results confirm that sugarcane bagasse fiber could be a functional food ingredient for improving physicochemical and textural properties of meat emulsion, at 2% addition level. Further, the altered functional properties of alkaline-treated sugarcane bagasse fiber had no impacts on physicochemical and textural properties of meat emulsions, regardless of fat level at 5%, 10% and 20%.

• Food Science of Animal Resources
• /
• v.35 no.4
• /
• pp.515-523
• /
• 2015

The effects of reducing fat levels from 30% to 20% and salt concentrations from 1.5% to 1.0% by partially substituting incorporated phosphate and sea mustard were investigated based on physicochemical properties of reduced-fat / low-NaCl meat emulsion systems. Cooking loss and emulsion stability, hardness, springiness, and cohesiveness for reduced-fat / low-NaCl meat emulsion systems with 20% pork back fat and 1.2% sodium chloride samples with incorporation of phosphate and sea mustard were similar to the control with 30% pork back fat and 1.5% sodium chloride. Results showed that reduced-fat / low-NaCl meat emulsion system samples containing phosphate and sea mustard had higher apparent viscosity. The results of this study show that the incorporation of phosphate and sea mustard in the formulation will successfully reduce fat and salt in the final meat products.

• Food Science of Animal Resources
• /
• v.36 no.6
• /
• pp.744-751
• /
• 2016

The objective of this study was to investigate the effects of partial beef fat replacement (0, 30, 50, 100%) with gelled emulsion (GE) prepared with olive oil on functional and quality properties of model system meat emulsion (MSME). GE consisted of inulin and gelatin as gelling agent and characteristics of gelled and model system meat emulsions were investigated. GE showed good initial stability against centrifugation forces and thermal stability at different temperatures. GE addition decreased the pH with respect to increase in GE concentration. Addition of GE increased lightness and yellowness but reduced redness compared to control samples. The results of the study showed that partial replacement of beef fat with GE could be used for improving cooking yield without negative effects on water holding capacity and emulsion stability compared to C samples when replacement level is up to 50%. The presence of GE significantly affected textural behaviors of samples (p<0.05). In conclusion, our study showed that GE have promising impacts on developing healthier meat product formulations besides improving technological characteristics.

• Korean journal of food and cookery science
• /
• v.31 no.3
• /
• pp.241-247
• /
• 2015

This study was conducted in order to evaluate emulsion mapping between emulsion stability and moisture content, cooking yield, hardness, protein solubility, apparent viscosity, and overall acceptability of pork or beef emulsion batters. The pork and beef emulsion batters were added to different parts of the meat. The formulations indicating low emulsion stability and high cooking yield were T1 (pork shoulder), T2 (pork ham), and T5 (beef tenderloin) treatments. Low stability, low hardness and protein solubility were also T1 (pork shoulder), T2 (pork ham), and T5 (beef tenderloin) treatments. The Pearson's correlation coefficients show that emulsion stability is negatively correlated with cooking yield (p<0.05), with a value of -0.90, and positively correlated with hardness (p<0.05), and protein solubility (p<0.01) with values of 0.65 and 0.59, respectively. This approach has been found to be particularly useful for highlighting differences among the emulsified properties in emulsion meat products. Therefore, the results obtained with emulsion mapping are useful in the making of new emulsified meat products of the desired quality.

• Food Science of Animal Resources
• /
• v.35 no.2
• /
• pp.258-264
• /
• 2015

This study was conducted to evaluate emulsion mapping between emulsion stability and cooking yields, apparent viscosity, and hardness of reduced-fat pork emulsion systems. The reduced-fat emulsion systems were supplemented with different lipid types and brown rice bran fiber (BRF) concentrations. Compared to the control with 30% back fat, lower emulsion stability and higher cooking yield of meat emulsion systems were observed in T1 (30% back fat+1% BRF), T2 (30% back fat+2% BRF), T3 (30% back fat+3% BRF), T4 (30% back fat+6% BRF), and T15 (10% back fat+10% canola oil+2% BRF). Lower emulsion stability and higher apparent viscosity were observed in T1, T2, T3, T4, and T8 (20% back fat+3% BRF) compared to the control. Lower emulsion stability and higher hardness was detected in all treatments compared with the control, except T5 (20% back fat), T10 (10% back fat+10% canola oil+2% BRF), T11 (10% back fat+10% olive oil+2% BRF), T12 (10% back fat+10% grape seed oil+2% BRF), and T13 (10% back fat+10% soybean oil+2% BRF). This approach has been found particularly useful for highlighting differences among the emulsified properties in emulsion meat products. Thus, the results obtained with emulsion mapping are useful in making emulsified meat products of desired quality characteristics, partially replacing pork back fat with a mix of 10% back fat, 10% canola oil and 2% BRF was most similar to the control with 30% pork back fat.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.886-895
• /
• 2013

This study was conducted to explore the antioxidant potential and functional value of guava (Psidium guajava L.) powder in muscle foods. Guava powder was used as a source of antioxidant dietary fibre in sheep meat nuggets at two different levels i.e., 0.5% (Treatment I) and 1.0% (Treatment II) and its effect was evaluated against control. Guava powder is rich in dietary fibre (43.21%), phenolics (44.04 mg GAE/g) and possesses good radical scavenging activity as well as reducing power. Incorporation of guava powder resulted in significant decrease (p<0.05) in pH of emulsion and nuggets, emulsion stability, cooking yield and moisture content of nuggets while ash and moisture content of emulsion were increased. Total phenolics, total dietary fibre (TDF) and ash content significantly increased (p<0.05) in nuggets with added guava powder. Product redness value was significantly improved (p<0.05) due to guava powder. Textural properties did not differ significantly except, springiness and shear force values. Guava powder was found to retard lipid peroxidation of cooked sheep meat nuggets as measured by TBARS number during refrigerated storage. Guava powder did not affect sensory characteristics of the products and can be used as source of antioxidant dietary fibre in meat foods.

• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.755-763
• /
• 2010

Sausages were prepared with fresh chicken breast meat and pork back fat, and formulated with different amounts of added chestnut (Castanea sativa Mill.) peel and ice water to study the effect on the products. The chicken emulsion sausages formulated with 1%, 2%, and 3% added chestnut peel powder were higher in moisture and ash content, and lower in energy values. The cooking loss, emulsion stability, and viscosity of the sausages were improved by the addition of chestnut peel. The fat content, pH, lightness, hardness, and springiness of the chicken emulsion sausage decreased as the amount of chestnut peel levels increased. The chicken emulsion sausages containing 1% and 3% chestnut peel had a higher overall acceptability than the control.