• 제목/요약/키워드: measuring volume

검색결과 793건 처리시간 0.039초

음용수의 섭취량 및 다경로 노출평가를 위한 노출변수 조사연구 (Daily Water Intake and Exposure Parameters Related to the Multi-route Exposure in Drinking Water)

  • 정용;신동천;박성은;최시내;박선미
    • Environmental Analysis Health and Toxicology
    • /
    • 제11권1_2호
    • /
    • pp.19-29
    • /
    • 1996
  • Human exposure to volatile compounds in tap water can occur from inhalation and dermal absorption as well as direct ingestion. The relative contribution to total human exposure from these pathways has been considered to be important especially for VOC's (volatile organic compounds). In an attempt to reduce the uncertainty of the risk assessment, it has been suggested that the exposure assessment process could be significantly improved by adopting Monte-Carlo simulation. However, there is no actual data in Korea for each exposure parameter to determine the level of exposure, and the distributional pattern. Therefore, we surveyed water use patterns and behavior related to multi-route exposure to VOC's in household tap water in Korea, and compared these values to the those in western countries. In the first survey, we calculated daily water intake using data from a sample of 1322 persons of several cities in Korea. In the second survey, we obtained questionnaire data on exposure time for showering, bathing and household activities, and tap water intake from 851households in Korea. In the last survey, we measured the exposure parameters (exposure time, water use rate etc.) related to showers, baths, toilets, dish washing, washing and cooking, and tap water intake was surveyed. Also, the subjects were measured their body weight, height and tidal volume, etc. A diary, a flow meter and a measuring cup were used to measure these values as precisely as possible. Average daily water intake was ranged 0.79-1.71 L/day for adults in three surveys. Tap water intake measured by log-sheet during one week in third survey was 1.26 (average), 1.98 L/day (90 percentlie), respectively. These results were comparable with results from EPA (1.4, 2L/day). The average amount of water used by housewives in the third survey was 515.0 $\pm$ 564.6L/day. In usual activity, the amount of water used in the bathroom, the laundry and the kitchen was 140.0 $\pm$ 538.9, 148.0 $\pm$ 174.5, 229.3 $\pm$ 205.4 L/day, respectively. Exposure parameters such as water intake rate, exposure duration, body weight, inhalation rates in surveyed data of Korean people differed from those published from western countries. This could be attributed to variations in lifestyle, dietary habits and physiological characteristics.

  • PDF

전단응력 하에서 에멀젼 상 변이의 측정을 위한 전기 유변학적 연구 (Electro-rheological Measurements of Phase Inversion of Emulsions under Shear Flow)

  • Seung Jae, Baik;Young-Jin, Lee;Yoon Sung, Nam;Chin Han, Kim;Han Kon, Kim;Hak Hee, Kang
    • 대한화장품학회지
    • /
    • 제30권2호
    • /
    • pp.147-151
    • /
    • 2004
  • 본 연구는 다양한 종류의 에멀젼에 전단응력을 가하며 그때 일어나는 에멀젼의 상 변이를 전기, 유변학적 특징을 통해 실시간으로 측정해 보는 것이다. 전기 전도도의 변화는 자체 제작한 JELLI$^{TM}$(Joint Electro-rheometer for Liquid-Liquid Inversion) 칩을 이용하였으며, 동시에 유변물성측정장치(rheometer)를 이용하여 유변물성의 변화를 측정하였다 JELLI$^{TM}$ 칩과 인조 피부를 유변물성측정장치 사이에 장착하고 그 사이에 다양한 종류의 에멀젼을 얇게 발라준 후, 일정한 전단응력을 주며 시간에 따른 저항과 점도 값의 변화를 측정하였다. O/W 제형의 경우 시간에 따라 저항 값이 커지는 경향을 보였으며 저항 값은 내부 상이 많을수록 더 급격한 변화를 나타냈다. 이때의 점도 변화를 보면, 저항 값의 변화가 클수록 점도의 변화도 큼을 볼 수 있었다. 이것은 내부 상의 파괴로 인해 외부의 힘에 저항하는 힘이 약해졌기 때문이라고 예상된다. 이런 결과를 이용하여 전단응력에 의한 에멀젼 상 변이 특성과 정도를 실시간, 정량적 비교할 수 있었다.

VANETs 환경에서 단일 교차로의 교통신호 제어방법에 관한 연구 (A study on traffic signal control at signalized intersections in VANETs)

  • 장형준;박귀태
    • 한국ITS학회 논문지
    • /
    • 제10권6호
    • /
    • pp.108-117
    • /
    • 2011
  • 서울시는 2001년부터 실시간 신호제어시스템(COSMOS)를 운영하고 있으며, 도시부 신호교차로의 신호운영 자료인 포화도 및 대기길이의 산출을 위하여 검지기를 설치해 차량으로부터 기초자료를 습득하고 있다. 현재 가장 보편적으로 사용하는 것은 유도성 루프검지기로 도로의 노면에 매설하는 방식이라 유지 보수가 용이하지 않고 비용이 많이 드는 단점이 있다. 또한 대기길이의 산정시 검지기를 통과하는 차량의 속도만으로 계산해야하기 때문에 속도측정 오차 발생시에 대기길이의 값에 영향을 미치게 된다. 제안하는 알고리즘은 카메라, 센서 및 이미지처리 장치와 같은 추가적인 장치 없이, VANETs(Vehicular Ad-hoc Networks)의 차량 간의 통신을 이용하고 각 방향별 그룹을 설정하여 교차로에서 원활한 교통 흐름을 가능케 하는 실시간 교통신호 제어 시스템을 제안한다. 본 연구에서 제안한 알고리즘은 GLD(Green Light District) Simulator를 기반으로 단일교차로 모델에서 AJWT(Average Junction Waiting Time)와 TQL(Total Queue Length) 에 대해서 확인하였으며 그 결과를 무작위(Random) 제어방식 및 최상우선(Best first) 제어방식과 비교하여 더 나은 결과를 보였다. 향후 VANETs를 활용한 실시간 제어방법이 보편화 될 경우 무선 통신기술을 이용한 교차로의 교통제어기술을 제안한 본 연구는 그 활용가치가 높을 것으로 판단된다.

청송약수를 이용한 두부응고에 관한 기초연구 (The Basic Study of Cheong-song Mineral Water for Tofu Coagulant)

  • 이성호
    • 대한화학회지
    • /
    • 제53권3호
    • /
    • pp.286-292
    • /
    • 2009
  • 청송 달기, 신촌약수의 Ca, Mg 등의 풍부한 미네랄 성분을 두부 응고제로 이용하기 위한 기초 연구를 하였다. 비교 응고제로는 많이 사용하고 있는 $CaCl_2,\;CaSO_4,\;MgCl_2,\;MgSO_4$를 이용하였다. 두유 2 mL에 일정량의 약수와 각종 응고제를 첨가하여 $80\;{^{\circ}C}$에서 전체 용액량을 10 mL로 하여 응고한 다음 여과한 상층액인 두부청의 퍼센트 투과도[T(%)]를 600 nm에서 구한 응고력 시험결과, 약수는 8 mL 이 상이 요구되었다. 비교 응고제의 경우 각각 0.4, 1, 0.8, 0.8 mL를 첨가한 경우 양호한 결과를 보였으며, Ca, Mg의 첨가량은 각각 66.14, 232.83와 95.68, 78.88 mg이다. 달기 및 신촌약수를 8 mL를 첨가한 경우 의 T(%) 값이 50.74와 58.52값을 보였으며, 첨가된 미네랄 양으로 볼 때에 Ca, Mg의 합한 양으로 2.41, 2.48 mg에 해당된다. 이 값은 비교 응고제보다 매우 적은 양임을 알 수 있으며, 적은 양에 비하여 상당한 응고력이 있음을 알 수 있다.

실험적 연구에 의한 현행 모르타르봉 시험법(ASTM C227-90)의 검토 (Discussion on the Current Mortar-bar Method (ASTM 0227-90) by Experimental Study)

  • 정지곤;이동영;유신애;황형중
    • 지질공학
    • /
    • 제6권3호
    • /
    • pp.155-163
    • /
    • 1996
  • 현행 ASTM C227-90은 모르타봉 시험법에 대한 규정인데 동 규정에 의하면 시험용 모르타르봉으 제작에 골재와 시멘트를 각각 675g과 300g을 쓰도록 무게비로 제시하고 있으며 제작된 모르타르봉의 초기길이 측정시기는 $24{\pm}2$시간으로 규정되어 있다. 또한 모르타르봉의 팽창원인을 알카리-골재반응에 두고 있다. ASTM C490-93a는 모르타르봉의 제작방법과 팽창률 계산방법이 소개되어 있는데 규정에 의하면 계산공식으 분모 G값을 10" 혹은 250mm로 고정시키고 있다. 본 연구는 위에 소개한 내용에 대한 실험적 연구를 통하여 다음과 같은 결론에 도달하였다. 첫째, 모르타르봉의 팽창은 알카리-골재반응만에 의한 것이 아니고 그 외 간극수와 겔수의 복합적인 작용에 의한 것이므로 ASTM C227-90의 내용을 일부 수정할 필요가 있다. 둘째, 골재에 의한 모르타르봉의 팽창원인 즉 알카리-골재반응과 간극수에 의한 팽창량을 알기 위하여는 골재와 시멘트의 배합비를 무레비 대신에 부피비로 제시함이 바람직 하다. 세째, ASTM C227-90과 ASTM C490-93a에서 제시한 모르타르봉의 초기길이 측정시기와 팽창률 계산방법은 더욱 정밀한 계산결과를 얻기 위하여 부분적인 수정이 필요하다.

  • PDF

공포와 기쁨 정서 간 안면온도 반응의 차이 (Difference of Facial Skin Temperature Responses between Fear and Joy)

  • 음영지;엄진섭;손진훈
    • 감성과학
    • /
    • 제15권1호
    • /
    • pp.1-8
    • /
    • 2012
  • 많은 연구에서 정서 특정적 생리 반응을 밝히기 위하여 심박률, 혈류량, 피부전도 반응 등의 지표를 사용하였으나, 안면온도를 이용한 정서 연구는 많지 않다. 본 연구는 적외선 열화상을 통해 공포 및 기쁨 자극에 대한 안면온도 변화를 관찰하고자 한다. 98명의 대학생과 중고생을 대상으로 공포 또는 기쁨을 유발하는 자극을 제시하기 전과 후의 안면온도를 측정하였다. 온도값은 이마, 눈앞, 콧등, 코끝, 그리고 뺨에서 추출하였다. 공포자극을 제시한 조건에서는 콧등과 코끝의 온도가 유의하게 낮아졌다. 기쁨 자극을 제시한 조건에서는 이마, 눈앞의 온도 상승이 유의하였으며, 코끝에서 온도가 유의하게 낮아졌다. 두 조건에서 코의 온도가 유의하게 낮아졌는데, 이는 공포 또는 기쁨을 경험할 때 각성수준이 증가하여 코 혈관의 혈류량이 감소함으로써 온도가 낮아진 것으로 볼 수 있다. 공포나 기쁨을 경험할 때 나타나는 온도 변화는 정서를 경험할 때 손가락온도를 측정한 선행 연구결과와 일치한다. 이런 연구결과는 정서 측정기법의 개발과, 인간의 정서를 탐지하는 컴퓨터 시스템의 기초를 확립하는데 기여하는 바가 있을 것이다.

  • PDF

기능성 브래지어 패턴디자인 연구 -돌출.하수 유방유형을 중심으로- (A Study on the functional pattern design for brassiere-focusing on large-breasted women-)

  • 박은미;임순
    • 한국의류학회지
    • /
    • 제27권3_4호
    • /
    • pp.407-417
    • /
    • 2003
  • The purpose of this study is to develop designs and patterns of a functional brassiere. For this purpose, women who have protruding and drooping breasts with 75B for their brassiere size were sampled. The fitting test for the fitness and function of test brassiere and control brassiere were carried out twice and compared the results from the both in terms of front, rear and side looks. The results of this study can be summarized as follows; 1. The results from measuring the level of sag and spread, and volume and protrusion of breasts shows that there are some distinctive differences in the measurements before and after wearing the test brassiere and the test brassiere is proved to be very effective in correcting breasts' shapes. 2. Front look: Since the two front cutting lines of the test brassiere served to have the curved main part pressing against the breasts, it could support breasts to more than satisfactory level. In addition, upperline panel and side panels of the test brassiere were found to have the upperline of the upper cup pressed against the breasts and at the same time it pressed and gathered the flab around upper part of the breasts and armpits that helped to rearrange the shape of the breasts. It is also proved that the two-pieced test brassier was found to be more functional in supporting the lower cup of the breasts. 3. Rear look: The test brassier was made up of two wide U-shaped wings with 2.5cm tape on its lower sides. Each wing has 4 lines and 3 hems (5.5cm). For this reason, the test brassiere was tighter and better fitted on its back. 4. Side look and entire look: The wings of the test brassiere might look wider than that of the control brassier which has conventional straight-shaped wings, but it was analyzed that the test brassiere held the upper and lower sides of the wings more effectively to be more pressed against the breast. Therefore, the test brassiere scored higher in terms of adjusting to body movements, while the control brassiere looked better in overall terms. 5. The functional brassier fur protruding and drooping breasts developed from the experiments of this study is a full side stretch brassiere which covers the entire breasts satisfactorily. The pattern drafting methods are suggested in to .

감성평가를 이용한 웹 디자인 요소의 활용방안 (Application of the Web Design Elements using the Aesthetic Evaluation)

  • 김미영;정홍인
    • 디자인학연구
    • /
    • 제17권3호
    • /
    • pp.413-420
    • /
    • 2004
  • 웹사이트의 특성에 따라 요구되는 감성을 파악하고 이를 디자인에 반영할 수 있는 새로운 디자인 방법론이 요구되고 있다. 기존의 사용성 위주의 웹 디자인 방법과는 차별화 되는 이와 같은 감성 연구를 통한 디자인 방법은 웹 디자이너들에게 또 다른 유용한 지침을 제공할 것이다. 하지만 이제까지 이에 관한 연구가 충분히 이루어지지 않아 특정 감성을 유발하는 웹 디자인을 위해 디자이너들은 자신의 직감과 경험에 의존할 수밖에 없었다. 이와 같이 특정 감성을 유발하는 디자인 방법론의 개발을 위해 본 연구에서는 감성공학에서 사용되는 감성 어휘를 이용한 감성공학 1류(Nagamachi, 2002, 박경수, 2000) 방법을 웹 디자인에 적용하여 특정 감성을 사용자에게 전달하는 방법을 알아보았다. 연구를 위해서 감성을 잘 전달할 수 있는 136개의 웹사이트를 전문 웹 디자이너들의 추천을 통해 우선적으로 선정하고 실험에 사용한 감성어휘(최재호, 2001)들을 잘 나타낼 수 있다고 판단되는 22개의 웹사이트를 최종적으로 선정하여 설문조사를 통해 감성 평가를 실시하였다. 표본 웹사이트들은 디자인 요소의 활용 정도, 균형, 전체 비중, 균일성 등을 고려하여 정량적으로 다시 평가하였다. 정량적 평가와 감성평가 결과 사이의 인과관계는 회귀분석을 통해 살펴보았고 그 결과를 바탕으로 특정 감성을 유발하는 웹 디자인 방법론을 제시하였다. 본 연구에서 사용된 방법과 절차는 감성유발과 관련된 디자인방법론 개발을 위해 다른 연구에서도 적용될 수 있을 것이며 회귀분석을 통한 디자인 방법론은 실제로 웹 디자인에 활용될 수 있을 것이다.논하였다. 본 연구는 웹에서의 사용자 경험에 대한 관점을 정황적 요소로까지 확장하고 이를 체계적으로 매핑하는 실증적인 사례를 제시함으로써 웹에서의 혁신적이며 크로스 사이트, 크로스 장르적인 컨텐츠 플래닝의 가능성을 시사하는데 의의가 있다고 하겠다.y used to some of interactive storytelling through hyper text in CD-ROM and web sites. More complicated and different structured models were born through games that offered graphics, virtual spaces and interactivity. When drawn onto a structural graph, few attributes and similarities seem to occur. This paper will try to outline and discuss structural graphs of interactive storytelling methods and suggest some ways for better storytelling design.eal sales volume, but the case study could verified that this method is effective to the evaluation of marketability in case of completely new product got on the typical category and the product category could

  • PDF

실시간 기름유출 모니터링 기술에 관한 연구 (A Study on the Real-Time Oil-Spill Monitoring Technology)

  • 염우정;홍연찬
    • 한국산학기술학회논문지
    • /
    • 제18권2호
    • /
    • pp.472-477
    • /
    • 2017
  • 기름 유출로 인한 피해는 수질환경 및 생태계를 단시간에 파괴할 뿐만 아니라 한번 오염이 되면 회복하는데 상당한 시간이 걸리고 회복이 어려우며, 지속적으로 나타난다. 때문에 해양이나 하천, 담수 등의 기름유출을 모니터링할 수 있는 오일 검출기의 필요성이 매우 높다. 오일을 검출할 수 있는 기술로는 크게 접촉식과 비접촉식으로 구분할 수 있으며, 접촉식으로는 Conductivity, Capacitance, Microwave 등이 있고 비접촉식으로는 Infrared, UV, Laser, Optic, Radar 등으로 구분할 수 있다. 수면 위에 있는 오일을 측정하기 위해서는 파고 및 너울, 빛의 산란, 온도, 염도 등 여러 가지 관측의 장애가 존재하기에 측정하고자 하는 환경에 맞는 오일 검출기를 선택하여 사용해야 한다. 본 논문에서는 접촉식 방식으로 정유회사 및 유화회사, 발전소 등의 오일 관련 업종에서 사용할 수 있는 오일 검출기를 구현하였다. 장비의 구성은 수면 위에 띄워 놓는 센서 모듈과 센서 모듈에서 들어오는 신호를 가공하여 표시하는 제어기로 구분하며, 센서를 통하여 오일의 유무를 판별하고 더 나아가 오일의 양과 오일의 종류에 따른 유전율의 변화를 관측하였다.

상아질 접착제의 용매 증발이 접착 효율에 미치는 영향 (The effect of solvent evaporation of dentin adhesive on bonding efficacy)

  • 조민우;김지연;김덕수;최경규
    • Restorative Dentistry and Endodontics
    • /
    • 제35권5호
    • /
    • pp.321-334
    • /
    • 2010
  • 연구목적: 본 연구는 상아질 접착제의 잔류 용매가 접착 효율에 미치는 영향을 평가하고자 하였다. 연구 재료 및 방법: 본 연구에서는 5세대 2단계 산부식형 접착제와 7세대 단일과정 자가부식형 접착제를 사용하였다. 상아질 접착제의 증발률과 전환률, 적용 후 용매의 공기건조 방법에 따른 미세인장결합강도를 측정하였으며 접착 계면을 FE-SEM을 이용하여 관찰하였다. 결과: 1. 시간에 따라 접착제의 증발률은 증가하나 접착제의 종류에 따라 증가 양상이 서로 달랐다. 2. 대부분 전환률은 증발률에 비례하는 경향을 나타내었다. 3. 공기건조 방법에 따라 결합강도는 대부분 under군, control군, over군 순으로 증가하는 양상을 나타내었다. 4. FE-SEM에서 아세톤을 용매로 사용하는 접착제는 공기건조 방법에 따라 droplet이나 gap이 관찰되었다. 결론: 상아질 접착제의 잔류 용매는 접착 효율에 부정적인 영향을 미치기 때문에, 상아질 접착제의 선택과 사용 시 용매의 종류와 특징에 대한 적절한 이해가 필요할 것이다.