• 화약ㆍ발파
• /
• 제26권2호
• /
• pp.92-98
• /
• 2008

발파진동 계측방법은 일반적으로 수동식 방법과 자동화 방법으로 나눌 수 있다. 이중에서 자동화 계측방법은 계측원의 수동적 작동에 의한 방법에 의존하지 않고 별도의 공간(사무실 등)에서 원격장치를 이용하여 진동측정기를 작동시켜 데이터를 전송받게 된다. 본 연구에서는 태양전지를 이용한 발파진동 자동화 계측시스템 운영 연구사례를 소개하고자 한다. 향후, 계측원 접근이 어렵고 발파작업중에 진동값 변화추이를 수시로 관찰이 필요한 현장에서는 이와 같은 쏠라셀을 이용한 자동화 계측시스템이 매우 유용하게 활용될 수 있으며 발파진동 제어와 안전발파 관리가 효과적으로 이루어질 수 있을 것으로 사료된다.

• 소음진동
• /
• 제10권4호
• /
• pp.623-628
• /
• 2000

This paper presents the automatic plumbness measuring system form improving the accuracy and working time for plumbness measuring of semi-umbrella type hydraulic turbine generator. It is general practice that rotating shaft should run within acceptable vibration limit. In order to obtain more accurate measuring data for single stage shaft on the semi-umbrella type, plumbness approach must be established carefully and accurately. Generally, present plumbness procedure is required several calculation algorithm, laser sensor and data acquisition devices. As a result of application to actual new system it is confirmed that working time could be saved over 80% and accurate measurement data could be acquired.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.8-15
• /
• 2005

A new measuring method for tool deflection has been developed when sculptured surface is processed in ball-end milling. Since the vibration due to cutting forces has low frequencies, an electromagnetic sensor is used for measuring the exact vibration displacement. The amplitude and direction of vibration displacement during the cutting process is presented as orbital plot. In this study, it assumes that the vibration displacement is proportional to the length of cutting chip. Therefore, tool deflection is calculated by summing up the vibration displacement of unit chip length for engaged chip length. In addition, computer programs has been developed to predict the deflection of tools when machining sculptured surface. This developed program predicts the tool deflection per block of NC data, so that it can easily identify the parts which have the possibility of machining errors.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.177-178
• /
• 2015

Various vibration caused by construction vehicles and equipment movement, rock blasting, and crushing obstacle occurs inevitably in construction sites. In this study, we measured the impact of vibration by blasting rock at construction sites, rock crushing, concrete crushing. The measuring instrument was installed in adjacent buildings and observed that blasting vibration differs depending on the charge weight, blasting distance, and the measuring position. The observation was maintained by allowable peak particle velocity standard according to each standards and references.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.49-55
• /
• 2013

A reactor vessel internals comprehensive vibration assessment program(RVI CVAP) of an advanced power reactor 1400(APR1400) is being performed as a non-prototype category-2 type of reactor based on the US nuclear regulatory commission regulatory guide(NRC RG) 1.20. The aim of this paper is to present the results of structural response analysis and measuring locations of a upper guide structure(UGS) assembly of the APR1400 reactor. The analysis results of the UGS assembly show that the specified integrity levels meet the design acceptance criteria. Also, the measuring locations are determined by the analysis results of the UGS assembly and selection criteria of previous study. These analysis results and measuring locations will be used as a guide to design a measurement system for the APR1400 RVI CVAP.

• 대한공업교육학회지
• /
• 제34권1호
• /
• pp.274-286
• /
• 2009

광섬유 센서는 음향이나 진동을 계측하는 곳에 광범위하게 사용된다. 특히 간섭계형 광섬유 센서는 이러한 물리량을 계측하는데 더욱 적합하다.본 연구에서는 페브리-페롯 간섭계형 광섬유 센서를 이용하여 파이프 내에서 발생하는 유체유기진동을 측정하였다. 이러한 진동은 또한 가속도계로도 측정하였고, 두 측정치를 서로 비교하였다. 파이프에서 벤츄리, 노즐, 침출 배럴, 급 확대관 등에 흐르는 유체로 인한 진동을 계측하였다. 유량은 50 L/min에서 150 L/min로 변화시켰고 파이프 내를 흐르는 유체의 평균 유속은 7 m/s정도였다. 실험결과에 근거하여 제안된 광섬유 센서는 유체유기진동을 잘 측정하였고 따라서 이러한 시스템은 파이프라인이나 케이블, 빌딩등에서 발생하는 유체유기진동으로 인한 시스템 모니터링에 적용할 수 있을 것으로 판단된다.

• 유공압시스템학회논문집
• /
• 제4권3호
• /
• pp.22-27
• /
• 2007

The source flow ripple and the source impedance in hydraulic pump are characteristic values showing fluid-borne vibration characteristics decisively. We cannot measure these two characteristic values directly, but can measure them by some indirect methods. One representative indirect measuring method is ISO 10767-1. The authors constructed a hardware and a software for the measuring method based on ISO 10767-1. Through the error evaluation of the measured results, accuracy of the measuring method using ISO 10767-1 was examined in detail.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.480-483
• /
• 2007

Recently, many apartment houses were built in nearby road and railway. Road traffic noise level and railroad traffic noise level are important factors on apartment houses inhabitant's acoustic comforts. The measurement methods which noted by Ministry of Construction & Transportation, Ministry of Environment and Korean Industrial Standard are used for measurement of exterior noise at apartment houses. The purpose of this study compare the noise level characteristic by the measuring methods and evaluating methods. The results show that road traffic noise in the daytime appeared by not greatly noise level difference by the measuring method and evaluating methods. But railroad traffic noise appeared by greatly the noise level difference by the equivalent noise level(1hour) and continuous time.

• 전기학회논문지P
• /
• 제57권4호
• /
• pp.424-430
• /
• 2008

A new active vibration measurement system in electric power transmission line is presented, using in the nondestructive test. With a permanent magnet and a couple of coils, the system exerts impact force to a test object and in turn picks up the vibration of the object. The natural frequency with the amplitude obtained from the system are used as a basis for the detection of defects in the object. The system is controlled by an electronic device designed to facilitate the fully automated testing process with consistent repeatability and reliability which are essential to the nondestructive test. The system is expected to be applied to the wide area of defect detection including the classification of mechanical parts in production and inspection processes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1409-1416
• /
• 2006

In measuring, uncertainty in measurement is essential to improve measuring reliability. Currently, however, in measuring impact sound insulation of floors, there are no guidelines to estimate uncertainty in measurement. In addition, the concept of uncertainty in rating is required to recognize the relation between measuring and rating. Therefore, through this paper, the efforts have been made to establish uncertainty in measurement and rating of light impact insulation of floors. The result of estimating of uncertainty in measurement and rating in our laboratory is considered reliable, considering ${\pm}0.46{\sim}1.44dB$ of uncertainty in measurement and 1 dB of uncertainty in rating.