• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.174-184
• /
• 2013

For the successful R&D and deployment of LED-based green energy lighting systems, the real-time power quality measurement of both various non-linear power signals including pulse waveform, spike waveform, etc and the undesired-signals including harmonics, sag, swell, etc is required. In this paper, we propose a low-cost power quality measurement (PQM) method for low- (60Hz-several KHz) to high-frequency (several tens KHz) power signals, which are generated by green-energy lighting systems, and implement a PQM testbed using TI TMS320F28335 MCU. The proposed algorithm is programmed using C in the CCS (Code Composer Studio) 3.3 environment and is verified using test signals generated by an arbitrary signal generator, NF-WF1974. In the implemented testbed, we can measure various non-linear current signals that LED SMPS generates, analyze harmonics by fast Fourier transform, and test sag, swell, and interruption using wavelet transform.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.864-867
• /
• 2003

Since the development of semiconductors, various related research has been conducted. During research, silicon diodes have been commonly used because of their simplicity and low cost in the manufacturing process. This research deals with p-n junction threshold voltages from silicon diodes due to transport current at a cryogenic temperature. At a cryogenic temperature(77K) we could get minimum current which junction threshold voltage becomes constant. This is experimented on GPIB communication and it consist of programmable current source, multimeter which gauge the threshold voltage in a very low temperature caused by transport current from 5nA to 1mA and $LN_2$(77K) for coolant. This experiment is programmed all process using Measurement studio(Lab window) tool.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.41-50
• /
• 2010

In this paper, a multi-band antenna with novel structure for mobile communications is designed and fabricated. The proposed antenna has the Multi-band antenna characteristics by two common-grounded slots with different size and angle. In order to reduce size and to enhance the gain of the antenna, a reflector is consisted of chokes on the three sides. It is optimized by using the CST Microwave Studio commercial software based on the FIA(Finite Integration Algorithm) and PBA(Perfect Boundary Approximation), and then the fabricating and measuring is practiced. As a result of measurement, the reflection coefficient is less than -11 dB(VSWR < 1.8) and the gain of antenna is more than 6dBi at 824~894MHz and 1885-2500MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.304-311
• /
• 2003

In this paper, we present the 2.4 ㎓ and 5 ㎓ dual band antenna fur access point of WLAN(Wireless Local Area Network). The proposed antenna must have equal gains in both frequency bands to accept two services. We proposed using collinear array to compensate gain difference for two different frequency bands. Simulation results using 3D simulation program, CST MWS(Microwave Studio), for dual band antenna with collinear away show that the maximum gain is about 4.7 dBi at 2.4 ㎓, 5.2 dBi at 5.7 ㎓. We got additional gain of about 2.1 ㏈ with collinear array for 2.4 ㎓ in measurement. Measured results for the dual band antenna with collinear array show applicable performances for access point of wireless LAN.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2394-2401
• /
• 2020

Octadecylamine is an effective film-forming amine that protects carbon steel from corrosion. In the present study, the effect of octadecylamine concentration on adsorption on a carbon steel surface was investigated in anaerobic alkaline solution by using SEM/EDS, TEM and the Materials Studio simulation techniques. TEM morphology observation and EDS elemental detection determine the thicknesses of octadecylamine film on a carbon steel surface, which are confirmed by the in-situ electrochemical impedance spectroscopy measurement and resistance calculation. The Materials Studio simulation reveals the number of octadecylamine film layers at different concentrations. Results obtained in this study indicate that adsorption of octadecylamine film on carbon steel proceeds with the multi-layer adsorption mechanism.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.359-365
• /
• 2005

This paper designed a very low profle, light and broadband internal antenna for operating at PCS, IMT-2000 and Wibro bands. The proposed antenna can be reduced the size by using shorting-pin and a broadband characteristic is obtained by using slit. It is optimized by using the CST Microwave Studio commercial software based on the FIA(Finite Integration Algorithm) and PBA(Perfect Boundary Approximation) and then fabricated and measured. As a result of measurement, the bandwidth(VSWR<2.5) is $40.8\;\%$ at $1.934\;\cal{GHz}$ and the size of antenna is 3$30\;\cal{mm}\times10\;\cal{mm}\times0.2\;\cal{mm}$.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.271-273
• /
• 2010

태양광발전시스템에서 PV모듈이나 어레이의 성능특성 및 성능추정이 요구되고 있다. 태양광 발전 모듈은 장기간 사용 시 환경 요인 등으로 효율이 나빠지며 어레이의 특정 모듈 효율저하는 전체 발전 전력의 감소를 초래하므로 실시간 감시가 필요하다. 이 논문은 태양광 발전 모듈의 발전 전력을 실시간으로 측정하기 위한 것이다. 모듈의 출력을 실시간으로 측정하기 위해 전압, 전류 측정 회로를 제작하고 온도, 일조량 측정 장치를 제작하여 RS485 통신으로 연결하였다. Visual Studio - Basic .Net(2005)과 NI사의 Measurement Studio를 이용하여 실시간 모니터링 프로그램을 제작하였고, 모듈들 사이의 상대적인 발전 출력을 비교하여 효율 저하가 의심되는 모듈을 실시간으로 탐색하였다. 20개 모듈의 직병렬로 구성된 1kW 태양광 발전체에 적용하여 시험한 결과 2개의 모듈에서 성능 저하가 의심되는 결과가 확인되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.515-522
• /
• 2008

In this paper, a slot antenna with built-in Bazooka balun aimed for a WiBro repeater was designed and fabricated. The return loss and radiation pattern of the slot antenna were improved due to the introduced Bazooka balun. This balun brings about even radiation pattern and keeps the stabilized coverage of repeater And it is easy to unite this balun with the antenna body by providing the terminal of Bazooka balun with screw shape. H-type slot was used to reduce the size of the antenna, and the slot antenna was fabricated in the structural symmetry with respect to a feeding point to afford the omni-directional radiation pattern. The simulated results were obtained by MWS(Microwave Studio Simulator) of CST company, and the measurement on the proposed antenna was conducted in an anechoic chamber equipped with a network analyzer and a far field measurement system. The measured peak gain shows 5.75 dBi and the average gain is above -0.8 dBi. The return loss remains below -12.35 dB for all frequency bands in WiBro regarded as a good performance.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.3
• /
• pp.61-75
• /
• 2023

In this paper, we design and experiment a 5G-based metaverse motion synchronization system with configuration of a mobile motion capture studio that has not been commercialized at home and abroad. As a result of the experiment, the average value of the latency test measurement using Wi-Fi is 0.134 seconds faster than the average latency test measurement value using the 5G network. Existing motion capture studios have spatial limitations as the motion capture range is limited to the Wi-Fi communication range. However, the 5G-based metaverse motion synchronization system configures a mobile motion capture studio so that motion performers can solve the spatial limitations by expanding the motion capture communication range indefinitely regardless of time and place. Therefore, it is possible to implement realistic metaverse contents by displaying a realistic and natural digital human because it is free from spatial constraints. The system which was tested in this paper can create a new business model by converging next-generation technologies that are receiving attention related to the digital virtual world, such as motion capture + 5G + digital human twin + metaverse. And it allows for research and develop a next-generation metaverse-based broadcasting solution at a recent time when the business value of digital human and metaverse technologies and functions has been proven and related sales are growing in earnest.

• Textile Coloration and Finishing
• /
• v.25 no.2
• /
• pp.89-93
• /
• 2013

The electrochemical study has been enjoyed in many areas of chemistry. Through this approach using electrochemical measurement, empirical HOMO and LUMO values can be calculated by three methods such as absorption measurement, cyclicvoltammetry and computational calculations. In this study, 1,3-bisdicyanovinylindane was prepared and investigated toward its optical properties. The absorption intensities were changed depending on changes of pH. These absorption changes are induced by resonance form of 1,3-bisdicyanovinylindane. The electron delocalization in ${\pi}$ system is related to the resonance form. In according to this electron density distribution and HOMO/LUMO values of 1,3-bisdicyanovinylindane were simulated and calculated by Material Studio 4.3, absorption measurement and cyclicvoltammograms. The 1,3-bisdicyanovinylindane is one of the most attracted acceptor units in D-${\pi}$-A system. This attempt is useful to determine more detailed characteristics of the energy potentials.