• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.439-444
• /
• 1986

In this paper the PID-B self-tuner[1] is extended to allow a less abrupt response to set point or plant parameter changes and to control a nonminimum phase plant. The proposed extended PID/ST derived from the direct pole-placement PID/ST is obtained with the Bezout identity as the underlying design method. And its control gains are normalized by the integral control gain. Although the integral control gain is normalized to 1 in our scheme, the so-called "set point and derivative kick" can be avoided sufficiently by normalizing the measurement vector and set point.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.438-445
• /
• 2008

The purpose of this study was to develop a measurement model based on PLS (Partial least square) method for blood pressures. Measurement system for blood pressure signals consisted of pressure sensor, va interface and embedded module. A mercury sphygmomanometer was connected with the measurement system through 3-way stopcock and used as reference of blood pressures. The blood pressure signals of 20 subjects were measured and tests were repeated 5 times per each subject. Total of 100 data were divided into a calibration set and a prediction set. The PLS models were developed to determine the systolic and the diastolic blood pressures. The PLS models were evaluated by the standard methods of the British Hypertension Society (BHS) protocol and the American Association for the Advancement of Medical Instrumentation (AAMI). The results of the PLS models were compared with those of MAA (maximum amplitude algorithm). The measured blood pressures with PLS method were highly correlated to those with a mercury sphygmomanometer in the systolic ($R^2=0.85$) and the diastolic blood pressure ($R^2=0.84$). The results showed that the PLS models were the effective tools for blood pressure measurements with high accuracy, and satisfied the standards of the BHS protocol and the AAMI.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.157-172
• /
• 2004

The results of this study has been split into two components, On set of results addressed the strategy of developing a Agility for maintenance consumer. The other set of results addressed the strategy of illuminating the successful measurement and concepts formed during the maintenance problem solving process, especially in the context of the Logistics Information system by aggregation information space. This paper presented a classifiable elements of Agility & Measurement of logistics capability in the Korea market. These concepts are positioned in a framework to give a better understanding what the consequences are of the changing business environment. The developments towards more globalization which leads to centralization and mass individualization that has a tendency to go more in the decentralized solutions, seems to be in contradiction. we will focus a proposal of Logistics information system and demand management decisions that should be a prime concern of any profit maximizing firm, unready strategy of investment. and we will prove the facts that it could be a guiding company which has a ability of cooperation with entities through the founding of supply chain, On the conclusion, we will show the variation which influences for capacity entities and alternative proposal to define a element which influnce for a cause and effect basically.[5]

• Journal of Sensor Science and Technology
• /
• v.13 no.5
• /
• pp.363-368
• /
• 2004

A reliable voltage measurement system is necessary to monitor status of power facilities in substations, which is easy to set up and is not influenced by electromagnetic interference in and around substation. In this paper, we described a voltage measurement system (VMS) which is composed of a capacitive voltage probe, an impedance converter, and an optical linker. To get a wide-band characteristic of the VMS, a high speed impedance converter was used, and the output impedance of the VMS was set at $50{\Omega}$ to match any types of observing instruments. The frequency bandwidth of the VMS. which was estimated by a step pulse, was ranges from 11.42 Hz to 13.65 MHz, and the VMS showed a good response characteristic in a high frequency domain such as impulse voltages as well as a commercial frequency voltage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.6
• /
• pp.977-993
• /
• 2017

In this study, we develop a scale to measure brand image attributes related to the symbolic use of fashion brands, and then, test the validity and reliability of the scale. In Study 1, a comprehensive literature review was conducted to generate the initial set of measurement items. Nominal Group Technique was subsequently conducted to refine the measurement items in a qualitative way. In Study 2, an expert survey was performed to further refine the measurement items in a quantitative way. In Study 3, a consumer survey was performed to determine the final set of measurement items and validate it. The scale of brand attribute symbolism consists of 21 items with six factors (i.e., Strength, Intellect, Cheerfulness, Traditional Femininity, Nature, and Affordability). The six-factor, 21-item scale is found valid and reliable. Implications, limitations of this study, and suggestions for future research are also discussed.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.14-20
• /
• 2021

The objective of this study is to introduce the new possibility of sensing technology based on inductive displacement sensors to monitor the status of wheel position in the hot forging process. In order to validate effectiveness of proposed sensing technology, the indirect forging force measurement with displacement sensor was applied into a typical closed hot forging die-set used for the manufacturing of flange bolts. The locations to implement the displacement sensor were selected carefully by simulating forming process and static structural. From the measurement results of the forging force change during one hot forging cycle, it was found that the proposed monitoring system can provide useful information to understand the detailed behaviors of die-set in the closed hot forging process.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.491-494
• /
• 2003

An Automatic Water Level Measurement System has been developed in this study. It has the characteristics that it use lower power and solar power and it has the ability of sending data and remote-controlled by wireless MODEM this system was set up in the experimental site and was tested. Also, the management system for the water level data has been developed and will be used by instruments administrating reservoirs.

• International Journal of Advanced Culture Technology
• /
• v.1 no.2
• /
• pp.1-6
• /
• 2013

In this paper, we evaluate performance of existing similarity measurement metric and propose a novel method using user's preferences information entropy to reduce MAE in memory-based collaborative recommender systems. The proposed method applies a similarity of individual inclination to traditional similarity measurement methods. We experiment on various similarity metrics under different conditions, which include an amount of data and significance weighting from n/10 to n/60, to verify the proposed method. As a result, we confirm the proposed method is robust and efficient from the viewpoint of a sparse data set, applying existing various similarity measurement methods and Significance Weighting.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.937-940
• /
• 1992

A cost-saving feeding rate contro method for a batch reaction process is proposed by reconfigurating the flow rate control loop where the feeding rate is estimated by differentiating weight measurement. While the existing control methods require either a flow rate measurement device or a flow rate estimator, the proposed method is devised not to require neither of these facilities by directly controlling the tank weight with a time-varying set point. Experimental evaluation in a pilot-scale unit shows that the proposed method can significantly reduce the actuator hunting of the existing method where the flow rate is estimated by differentiating the weight measurement.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.241-248
• /
• 2010

A bimodal low-floor tram can provide the punctuality of trains and the flexibility of bus together to the passengers. Its propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. This paper presents a development of the measurement equipment for fine-tuning of a series hybrid propulsion system of bimodal low-floor tram. Its configuration schemes are described and certified using the measurement data of bimodal low-floor tram.