• Journal of the Korean Dietetic Association
• /
• v.14 no.2
• /
• pp.186-197
• /
• 2008

The aim of this study was to measure the brand images of contract foodservice management companies by identifying brand image attributes and then developing a measurement scale to measure the weight of these attributes. The measurement scale was developed by following a 5-stage process that included face-to-face interviews with experts, literature review, questionnaire surveys, verification of scale validity, exploratory factor analysis, and confirmatory factor analysis. A total of 137 items measuring brand image were collected: 37 items from studies of brand image and corporate image, 55 items from studies of contract foodservice management companies and 45 items from the internet and websites of contract foodservice management companies. A survey was then conducted to assess the validity and reliability of the questionnaire items. Ultimately, the 137 items were reduced to 40 items. The calculated Cronbach's alpha for the 40 brand image items was 0.934, demonstrating good internal consistency. Based on exploratory factor analysis (EFA), employee attitude, menu content, corporate image, dining location and ambience, along with 33 subattributes, were identified as brand image attributes. Employee attitude was the most significant attribute influencing brand image. After confirmatory factor analysis (CFA) and a review process, four brand image attributes and 33 subattributes were finalized and incorporated into the scale.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.415-420
• /
• 2015

A novel method to measure the scale factor for the all-optical atomic spin inertial measurement device (ASIMD) is demonstrated in this paper. The method can realize the calibration of the scale factor by a self-consistent method with small errors in the quiescent state. At first, the matured IMU (inertial measurement unit) device was fixed on an optical platform together with the ASIMD, and it has been used to calibrate the scale factor for the ASIMD. The results show that there were some errors causing the inaccuracy of the experiment. By the comparative analysis of theory and experiment, the ASIMD was unable to keep pace with the IMU. Considering the characteristics of the ASIMD, the mismatch between the driven frequency of the optical platform and the bandwidth of the ASIMD was the major reason. An all-optical atomic spin magnetometer was set up at first. The sensitivity of the magnetometer is ultra-high, and it can be used to detect the magnetization of spin-polarized noble gas. The gyromagnetic ratio of the noble gas is a physical constant, and it has already been measured accurately. So a novel calibration method for scale factor based on the gyromagnetic ratio has been presented. The relevant theoretical analysis and experiments have been implemented. The results showed that the scale factor of the device was $7.272V/^{\circ}/s$ by multi-group experiments with the maximum error value 0.49%.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.150-162
• /
• 2010

Assessment of hydrodynamic performance of a ship hull has been focused on a model ship rather than a full-scale ship. In order to design the propeller of a ship, model-scale wake is often extended to full-scale based upon an empirical method or designer's experience, since wake measurement data for a full-scale ship is very rare. Recently modern CFD tools made some success in reproducing wake field of a model ship, which implicates that there are some possibilities of the accurate prediction of full-scale wakes. In this paper firstly the evaluation of model-scale wake obtained by Fluent package was performed. It was found that CFD calculation with the Reynolds-stress model (RSM) provided much better agreement with wake measurement in the towing tank than with the realizable k-$\varepsilon$ model (RKE). In the next full-scale wake was calculated using the same package to find out the difference between model and full-scale wakes. Three hull forms of KLNG, KCS, KVLCC2 having measurement data open for the public, were chosen for the comparison of resistance, form factor, and propeller plane wake between model ships and full-scale ships.

• International Journal of Computer Science & Network Security
• /
• v.22 no.8
• /
• pp.7-14
• /
• 2022

This study aimed to test the factor structure of the measure of student participation in distance education. The study population consisted of all teachers in public education and faculty members in higher education in the Kingdom of Saudi Arabia by applying it to a sample of bachelor's and graduate students at the college of Education at umm al-Qura University. The (ESE) was applied to a random sample representing the study population consisting of (216) respondents. The results of the study showed that the scale consists of three main factors, with showed a high degree of construct validity through fit indices of the confirmatory factor analysis. The results have shown a gradual consistency of the measure's invariance that reaches the high level of the Measurement Invariance across the gender and study groups variables.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.79-81
• /
• 2000

Measurement used electrical sounding(MacOHM 2115, Japan) for large scale grounding resistance of So-Yang Dam hydroelectric power plant. To applied measurement method is fall of potential method. This result propose to method of efficient administration for grounding system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.5
• /
• pp.714-723
• /
• 2000

The purpose of this study is to develop functional and sensible brassiere for middle-aged women. As a methodology, engineering design process, especially, QFD(Quality Function Deployment) was adopted to translate consumer's needs into product design parameters. Wearing tests of commercial brassiere were performed for the development o subjective measurement scale. The environmental condition was controlled at 28$\pm$1$^{\circ}C$, 65$\pm$3%RH. As results, subjective measurement scale and dimension for the evaluation of sensible brassiere were extracted from factor analysis. Four factors were fitting, aesthetic property, pressure sensation, displacement of brassiere due to movement. Regression equations with the subjective evaluation descriptors were developed for the prediction of wearing comfort of brassiere. (R2=.82) The most critical design parameter was wire-related property and second one was stretchability of main material of brassiere. Also, wearing comfort of brassiere was affected by the interaction of initial stretchability of wing and support of strap.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.2
• /
• pp.281-288
• /
• 2010

Purpose : The purpose of this study was to examine the correlation between Pediatric Balance Scale(PBS) and Gross Motor Function Measurement(GMFM) with cerebral palsy(CP) children. Methods : 31 ambulatory children with CP were recruited for this study. PBS is a modified version of the Berg’s Balance Scale to access the children with motor impairments. To access the motor functions that directly influence to the functional independence of the ambulatory CP children, total scores of standing category and walking/running/jumping category of GMFM were selectively compared with PBS score by Spearman correlation coefficient analysis. Results : The results revealed high correlation between PBS and GMFM scores both in standing and walking/running/jumping categories(r=.9). Conclusions : Therefore, this study indicates that PBS can be applied not only as a tool to access balance, but also as a measurement to predict and access the level of standing and ambulatory related functions of children with CP.

• Journal of Drive and Control
• /
• v.18 no.2
• /
• pp.38-45
• /
• 2021

In recent years, the demand for an onboard scale system which can directly monitor load distribution and overload of vehicles has increased. Depending on the suspension type of the vehicle, the onboard scale system could use different types of sensors, such as, angle sensors, pressure sensors, load cells, etc. In the case of a vehicle equipped with leaf spring suspension system, the load of the vehicle is measured by using the deflection or displacement of the leaf spring. Leaf springs have hysteresis characteristics that vary in displacement depending on the load state. These characteristics cause load measurement errors when moving or removing cargoes. Therefore, this study aimed at developing an onboard scale device for cargo vehicles equipped with leaf springs. A sectional modeling method which can reduce measurement errors caused by hysteresis characteristics was also proposed.

• Journal of Korean Academy of Nursing
• /
• v.26 no.4
• /
• pp.868-877
• /
• 1996

This study was done to analyze research trends and to suggest future perspectives for nursing research on fatigue. The author reviewed 31 Korean and foreign research papers which have been published in the literature since 1970. An analysis of the study focused on the type of research subjects, type of study design. measurement instrument, and its correlated parameters. The results of the study are summarized as follows : First, within all of the studies analayzed, 14 studies were publised in Korea and 17 were published abroad. The number of studies done abroad have been increasing rapidly since 1991. Second, an analysis of the research design of the studies showed, eight studies each, Korean and foreign used survey design. Two Korean studies and seven foreign studies used a correlational design. Four comparative studies were done in Korea, but only two experimetal studies were performed abroad. Therefore, it was found that the trend of the study design used is survey design and there are more correlational studies done abroad than in Korea. Third, the type of the study subjects ; 11 Korean and three foreign studies dealt with healthy people. In addition, three Korean and 14 foreign studies investigated patients with various illnesses. It was found that patients with various illnesses were studied more frequently in foreign studies than in Korean studies. Fourth, the measurement tool used in the Korean studies ; 13 studies used a testible tool to assess patients' subjective symtoms or complaints of fatigue. The most commonly used tool used in 10 studies, was the Fatigue Self-Perception Scale, which was designed by the Labor and Health Institute of Japan. The Visual Analogue Scale was used in two studies, and Piper Fatigue Scale, addtional with physiologic parameters, was used in one study. In the foreign studies, subjective measurement tools were used in 16 studies. A combination of a subjective measurement tool with objective parameters was used in ten studies. For the subjective measurement tool used in the foreign studies, a specific measurement tool developed by the researcher which was used in seven studies. Either Rhoten Fatigue Scale or the Visual Analog Scale were used in three studies. Additionally, in order to identify the relationship between fatigue and psychological factors, The Profile of Mood State was used in three studies. Beck Depression Inventory was used in two studies. The Self Rated Depression Scale, developed by Zung, was used in one study and other measurement tools were used to measure various psychological parameters. Rhoten fatigue Checklist was also used to observe behavior patterns. Lastly, nine studies identified correlations between fatigue and other parameters. A significant correlation was found between fatigue and psychological factors such as depression, and pain. As a result of the above findings, it can be said that research trends on fatigue are increasing internationally. The selected study designs are survey studies both in Korea and abroad. There are more correlational studies abroad than in Korea. In addition, subjective measurement tools and objective parameters are used variously and combined with each other. had, there is a significant correlation between fatigue and psychological factors such as depression, and pain. More survey and correlational studies need to be done to identify the relationship of fatigue in patients with various condition or diagnoses and to suggest a scientific basis for nursing interventions with fatigue. Also, a tool to assess patient's subjective, objective, and behavioral aspects on fatigue needs to be developed.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.3
• /
• pp.53-61
• /
• 1996

The subject of this study was to analyse overviews of companies which exceed TLV by industry, hazardous factors, and to estimate the numbers of companies measured in 1993 and the implementation rate of working environment measurement by the act of industrial safety and health The result of this study was as follow. 1. The number of cases which exceed TLV was 5,937 companies. In distribution of excess companies by the scale of workers, small scale cases under the 49 workers were 3,150 companies(53.0%) of total cases, medium scale cases between 50 - 299 workers were 2,248 companies(37.9%), and large scale cases over 300 workers were 539 companies(9.1%). By the industry of excess companies, it was marked high rate in manufacture of fabricared metal products(except machinary and equipment), manufacture of textiles of each 1,048 companies(17.7%), and 1,018 companies(17.1%). By the area of excess companies, it was shown high rate in Kyeongki area marked 1,679 companies(28.3%) and Daegu-Kyeongbuk area were marked 1,417 companies (23.9%). By the hazardous factors of excess companies, noise was recorded high rate in 5,160 companies (86.9%), dust was shown in 1,245 companies(21.0%), organic solvent was marked 130 companies(7.9%). The number of excess factors by the company was 1.2. In this result, the more it was bigger scale companies, the more excess factors were much more and the more it was recorded higher rate in noise organic solvent heavy metals, etc. 2. The measured cases in institutes during 1994 were 1,596 companies, and excess cases were 157 companies(9.8%) among them. By the scale of workers, small scale cases under the 49 workers were 190 companies (17.9%) among 1,064 companies, cases of medium scale cases between 50-299 workers were 127 companies (27.9%) among 463 companies, and large scale cases over 300 workers were 31 companies(44.9%) among 69 companies. In this result industry of the highest rate shown was manufacture of basic metals in 20 companies exceeded among 53 companies (37.7%), and was manufacture of pulp, paper production in 14 companies exceeded among 40 companies(35.0%), and the excess rate were high in bigger scale. 3. Companies estimated by the data of excess cases and excess rate in 1993 were 30,474 implementation rate estimated for measurement of working environment was 34.3% of companies in korean industry. In this result, it was comparatively shown of measurement rate for the working environment in manufacture of pulp, paper product, manufacture of machinary and equipment n.e.c., and of high measurement rate and excess rate in manufacture of electrial machinary and apparatus, and manufacture of basic metals.