• Title/Summary/Keyword: measurement scale

검색결과 2,667건 처리시간 0.033초

한국판 긍정적 및 부정적 경험 척도(SPANE): 요인구조 및 성별 측정 동일성 (Scale of Positive and Negative Experience (SPANE): Factor Structure and Measurement Invariance Across Gender in Korea)

  • 구재선
    • 감성과학
    • /
    • 제21권3호
    • /
    • pp.103-114
    • /
    • 2018
  • SPANE(the Scale of Positive and Negative Experience) 척도는 기존 정서 측정도구의 한계를 보완하기 위해 Diener 등(2010)이 개발한 정서적 안녕감 척도이다. 이 척도는 긍정적 정서와 부정적 정서 경험을 측정하는 총 12문항으로 구성되어 있으며, 포괄적 정서(e.g. positive, negative)와 구체적 정서(e.g. joyful, sad) 문항이 포함되어 있다. 각성수준의 측면에서도 고(e.g. joy, angry), 중(e.g. happy, afraid), 저(e.g. contented, sad) 각성 정서들이 모두 반영되어 있다. 본 연구는 한국판 SPANE 척도의 요인구조 및 성별 측정 동일성을 검토하였다. 이를 위해서, 한국 대학생 총 551명(남자 276, 여자 275)의 자료를 분석했다. 그 결과, SPANE 척도는 양호한 수준의 신뢰도와 요인 타당도를 보였다. 또한 남녀 집단 간에 요인구조, 요인부하량, 절편이 동일한 것으로 나타나서, 성별 척도 동일성이 확인되었다. 이러한 결과는 SPANE 척도가 한국에서도 대학생들의 정서적 안녕감을 측정하기에 적합한 척도일 뿐 아니라 성별 차이를 비교하는 타당한 도구가 될 수 있음을 시사한다.

Comparison between wind load by wind tunnel test and in-site measurement of long-span spatial structure

  • Liu, Hui;Qu, Wei-Lian;Li, Qiu-Sheng
    • Wind and Structures
    • /
    • 제14권4호
    • /
    • pp.301-319
    • /
    • 2011
  • The full-scale measurements are compared with the wind tunnel test results for the long-span roof latticed spatial structure of Shenzhen Citizen Center. A direct comparison of model testing results to full-scale measurements is always desirable, not only in validating the experimental data and methods but also in providing better understanding of the physics such as Reynolds numbers and scale effects. Since the quantity and location of full-scale measurements points are different from those of the wind tunnel tests taps, the weighted proper orthogonal decomposition technique is applied to the wind pressure data obtained from the wind tunnel tests to generate a time history of wind load vector, then loads acted on all the internal nodes are obtained by interpolation technique. The nodal mean wind pressure coefficients, root-mean-square of wind pressure coefficients and wind pressure power spectrum are also calculated. The time and frequency domain characteristics of full-scale measurements wind load are analyzed based on filtered data-acquisitions. In the analysis, special attention is paid to the distributions of the mean wind pressure coefficients of center part of Shenzhen Citizen Center long-span roof spatial latticed structure. Furthermore, a brief discussion about difference between the wind pressure power spectrum from the wind tunnel experiments and that from the full-scale in-site measurements is compared. The result is important fundament of wind-induced dynamic response of long-span spatial latticed structures.

무게 측정에 의한 원료 정량 투입 제어 방법 (A method for feeding flow rate control by measuring weight)

  • 권오정;황일영;이광순
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.937-940
    • /
    • 1992
  • A cost-saving feeding rate contro method for a batch reaction process is proposed by reconfigurating the flow rate control loop where the feeding rate is estimated by differentiating weight measurement. While the existing control methods require either a flow rate measurement device or a flow rate estimator, the proposed method is devised not to require neither of these facilities by directly controlling the tank weight with a time-varying set point. Experimental evaluation in a pilot-scale unit shows that the proposed method can significantly reduce the actuator hunting of the existing method where the flow rate is estimated by differentiating the weight measurement.

  • PDF

문직운전계통을 포함한 전럭계통에서의 상태주정에 관한 연구 (Interconnected AC/DC System)

  • 김준현;박건수;이종범
    • 대한전기학회논문지
    • /
    • 제37권1호
    • /
    • pp.1-9
    • /
    • 1988
  • This paper descibes a method for the state estimation in power systems with interconnected AC/DC system. The state values in interconnected AC/DC system are estimated using measurement values with the pseudo measurement so that the number of telemetering measurement can be reduced. Especially, the state values in AC system are estimated through hierarchical method after system decomposition including superposition bus was formed for the state estimation in large-scale power systems. The results of the application to the two model power systems show the dffectiveness of the presented algorithms.

  • PDF

Improved PDP Driving Methods Based on Three Wall Charge States

  • Jeong, Ju-Young;Kim, Seok-I;Jung, Young-Ho
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.211-214
    • /
    • 2002
  • We present gray scale implementation method based on QMA driving technique. We clarified the mechanism of wall charge quantization through discharge current measurement. We used three wall charge states to implement gray scale. The cells would be one of fully-ON, half-On, and OFF states. We built a five sub-fields 243 level gray scale with sustain pulse count of 2, 6, 18, 54, and 162.

  • PDF

쌍축선 추진기 캐비테이션 소음 모형시험 연구 (A Study on the Model Test for the Twin Propeller Cavitation Noise)

  • 박철수;김건도;임근태;박영하;장현길;장영훈
    • 대한조선학회논문집
    • /
    • 제55권1호
    • /
    • pp.28-36
    • /
    • 2018
  • The experimental results of the model tests for the twin propeller cavitation noise are presented. The model test was carried out by means of procedure of noise measurement followed by the signal processing and full-scale extrapolation. In order to convert the measured sound pressure level into the sound source level, transfer function measurements for three conditions were performed according to the combination of locations and number of virtual sources. White noise and LFM signal were used as a source signals to examine the influence of the input signal. For the twin propellers, 5 transfer functions were defined and the results were discussed. Cavitation noise measurement tests were performed similarly to the transfer function measurement test. Noise source localization analysis was performed to confirm the test effectiveness. It was confirmed that the source level of the twin propeller can be estimated reliably by using transfer function corrections. Finally, the model test results were converted into full-scale by applying the ITTC '87 model-ship scaling raw, and the validity of the model test was confirmed by comparison with the full-scale measurement result.

청소년을 위한 블렌디드러닝 기반 온라인 자기주도학습능력 종합진단검사 도구 개발 (Development of a Blended-learning based Online Self-directed Learning Ability Measurement Scale for Youth)

  • 김판수;최성우;강형구;전규태;전민경
    • 디지털융복합연구
    • /
    • 제15권4호
    • /
    • pp.1-11
    • /
    • 2017
  • 본 연구의 목적은 청소년들의 자기주도학습 능력 향상을 위한 SMMIS 모형 기반의 온라인 종합진단검사 도구를 개발하는 것이다. 이를 위해 문헌 분석 및 전문가 검토를 거쳐 초 중학생용과 고등학생용 검사 문항을 개발하였다. 아울러 해석 규준 설정을 위해 총 1,626명의 초, 중, 고등학생을 대상으로 검사를 실시하였다. 그 결과를 토대로 블렌디드러닝 기반 온라인 자기주도학습 종합진단검사 시스템을 개발하였다. 아울러 청소년 대상 블렌디드러닝 기반 온라인 종합진단검사 결과의 구체적 활용 방안과 향후 보완 및 후속 연구 방향에 대해 논의하였다.

사춘기청소년의 건강위험행동에 대한 요인분석: 대구·경북지역을 중심으로 (Factor Analysis of Health Risk Behaviors in Adolescents: Focusing on Daegu and Gyeongbuk provinces)

  • 금창애;서경도;한상철
    • 디지털융복합연구
    • /
    • 제16권2호
    • /
    • pp.421-430
    • /
    • 2018
  • 본 연구에서는 대구지역의 사춘기청소년을 대상으로 건강위험행동에 대한 척도기준을 분석하는 데 있다. 연구방범은 우리나라 사춘기청소년의 건강특성에 맞는 건강위험행동 측정항목을 개발하고자, 기존 THI의 측정항목에 대한 내용 타당성(CVR)분석을 하고, 이후 확인적 요인분석을 통하여 구체화 한 건강위험행동의 척도를 비교 분석하였다. 분석결과, 요인분석을 통해 개발된 사춘기청소년들의 건강위험행동 척도에 대한 신뢰도 검증을 실시하여 전신상태, 호흡기, 순환기, 소화기, 정신건강 기타항목 등의 측정항목을 도출하였다. 개발된 건강위험행동 척도의 신뢰도와 타당도는 상당히 양호한 것으로 나타났다. 이러한 연구를 통해서 사춘기청소년들의 건강과 관련된 위험행동을 감소시킬 수 있는 예방프로그램을 개발하고, 정책수립에 기초적인 자료를 제공할 수 있는 전략을 고안해 낼 수 있을 것이다.

Quality Evaluation of Ultrasonographic Equipment Using an ATS-539 Multipurpose Phantom in Veterinary Medicine

  • Cho, Young-kwon;Lee, Youngjin;Lee, Kichang
    • 한국임상수의학회지
    • /
    • 제39권3호
    • /
    • pp.114-120
    • /
    • 2022
  • The purpose of this study is to examine the status of quality control using multipurpose phantom of ultrasound equipment used in hospital of veterinary college in South Korea by using ATS-539 multipurpose phantom so as to examine quantitative and objective new image evaluation method. Specialists discussed and analyzed multipurpose phantom images acquired by using convex transducer of 10 ultrasound imaging devices, currently used in 9 veterinary colleges, at 4.0-6.0 MHz. Total 8 items that can be measured with ATS-539 multipurpose phantom including dead zone, vertical and horizontal measurement, axial/lateral resolution, sensitivity, focal zone, functional resolution and gray scale/dynamic range were evaluated. For qualitative evaluation, valid decisions were made based on dead zone, axial/lateral resolution, and gray scale/dynamic range which are resolution index, and coefficient of variation (COV) and blind referenceless image spatial quality evaluator (BRISQUE) were found to increase objectivity. As a result of experiment, all the targeted ultrasonic devices were found appropriate from qualitative evaluation items of dead zone, axial/lateral resolution, and gray scale/dynamic range. In other evaluation items, they were found to be appropriate from focal zone and vertical measurement of quantitative evaluation while inappropriate from horizontal measurement, sensitivity, and functional resolution. COV value was 0.12 ± 0.04, and BRISQUE value was 47.77 ± 2.77, both analysis results show that the noise level of all ultrasonic devices was located within tolerance range. Upon image examination using ATS-539 multipurpose phantom, they were 100% appropriate with inspection standards of dead zone, axial/lateral resolution, and gray scale/dynamic range, and besides, focal zone and functional resolution can be used as evaluation items. In the field of veterinary medicine, 8 standard items using ATS-539 multipurpose phantom and image evaluation items using COV and BRISQUE can be used as standards for quality control of ultrasonography machine.