• 대한치과교정학회지
• /
• 제25권2호
• /
• pp.201-208
• /
• 1995

교정치료시 보다 효과적인 치아 이동을 위한 한 방법으로 최근 자석 사용이 고려되고 있다. 영구자석의 체적 변화가 자력에 미치는 영향을 파악하고자 한 쪽에 한 개의 자석을 고정하고 반대쪽 자석의 두께나 넓이를 일정한 비율로 증가시키면서 양측 간에 나타나는 자력을 비교 연구한 결과 다음과 같은 결과를 얻었다. 1. 두께를 증가시킨 경우에는 자력이 증가하였으나 넓이를 증가시킨 경우 자력이 오히려 감소하였다. 2. 체적 증가에 따른 자력의 증감은 대수함수 분포 양상을 나타내었다. 3. 두께 증가로 체적을 변화시킨 경우, 같은 두께라도 처음부터 크게 제작한 자석이 작은 자석을 여러 개 합한 것보다 큰 자력을 보였다. 본 연구 결과 구강내에서 자력을 증가시키기 위해서는, 마주보는 자석면은 같게 유지하면서 넓이 증가보다는 두께를 증가시키는 방법이, 그리고 처음부터 두꺼운 자석을 사용하는 것이 보다 효율적임을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.339-347
• /
• 2014

Floor impact sound in high-rise apartment building became one of social problems. A lot of civil complaints on floor impact sound occur continuously and the number of disputes between neighbors in small and aged apartment buildings is increasing. Interests on heavy-weight impact sound pressure level measurement and evaluation method is increased. Previous study reported that heavy-weight impact sound level was changed by the sound field condition of receiving reverberation chamber. In this study, heavy-weight impact sound pressure level change by the receiving sound field condition was measured in standard test facility and mock-up test room. These two experimental conditions were designed to simulate averaged living room of common apartment units. By the change of sound absorption power in receiving room, heavy-weight impact sound pressure level in most of frequency bands were changed in standard test facility and mock-up room. Normalized maximum sound pressure level regulated in ISO 16032 showed wider range of heavy/soft impact sound pressure level. Heavy/soft impact sound pressure level change was became smaller by the application of standardized maximum sound pressure level and ISO/CD 10140-3 Amd 2 method. In the case of standardized maximum sound pressure level, absolute sound pressure level changed. From these results, receiving sound field correction method regulated in ISO/CD 10140-3 Amd 2 is needed for the precision measurement and evaluation of heavy-weight impact sound.

• 한국지열·수열에너지학회논문집
• /
• 제12권4호
• /
• pp.40-46
• /
• 2016

In order to improve air quality of indoor environment, studies of the underfloor air distribution (UFAD) system for application in buildings are actively in progress based on temperature and air flow distribution. However, although the age of air is the major evaluation parameter, there has been very little study on this parameter for the UFAD system. In this study, we investigated the age of air to reach the air diffuser, which is installed at the bottom of the interior by the UFAD system. Computational fluid dynamics simulations showed no regular pattern to the maximum value of the age of air in accordance with air flow rate and the velocity at air diffuser. These factors can be deduced from air movement by considering that air emitted from air conditioners was rotated according to the bottom shape of the floor, and then, the age of air in the rotation center was increased. The average age of air of internal interior was reduced considerably as the flow velocity at the underfloor air diffuser was increased from 0.5 m/s to 1.0 m/s However, the age of air was not substantially affected with change in the air volume. Moreover, when the flow velocity at the underfloor air diffuser was higher than 1.0 m/s, the age of air showed no significant difference with change in air volume or height of measurement. These results imply that indoor air quality is more substantially influenced by flow velocity than air volume, and the appropriate flow velocity is 1 m/s or more.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권1호
• /
• pp.127-134
• /
• 2017

본 연구는 실내 라돈 가스의 농도를 낮추기 위한 방법을 찾기 위해 건물의 준공연도, 건물의 용적, 환기 세 가지 변수에 따른 실내 라돈 농도를 비교, 측정하여 그 영향을 알아보고자 한다. 측정은 1973년에 건축이 되었고, 2011년에 증축이 된 건물의 6층을 대상으로 용적이 서로 다르고 준공연도가 1973년과 2011년인 6개의 강의실을 측정하였다. 준공연도에 따른 라돈농도를 비교하기 위해 4개의 강의실을 선정하였고, 용적에 따른 라돈농도를 비교하기 위해 준공연도가 같고 용적이 다른 강의실을 선정하였고, 환기에 따른 라돈농도를 비교하기 위해 6개의 강의실의 폐쇄와 환기를 시행하였다. 결과적으로 준공연도에 따른 라돈농도는 최근에 지어진 건물에서 라돈농도가 최대 4배 높게 나타났으며, 용적에 따른 라돈농도는 용적이 작을수록 높게 나타났다. 환기에 따른 라돈농도의 변화는 폐쇄 시보다 환기를 할 경우 약 80%의 감소율을 보였다. 특히, 준공연도가 최근이면서 용적이 작을수록 라돈농도가 높게 검출되었고, 세 가지 변수 중 환기가 라돈농도 감소에 가장 큰 영향을 끼쳐 라돈에 의한 피폭감소 효과를 기대할 수 있을 것으로 사료된다.

• 대한간호학회지
• /
• 제24권1호
• /
• pp.115-128
• /
• 1994

The purpose of this study was to observe the change of circumference, volume and strength of normal and operated lower extremities on 3rd, 7th, 10th, and 14th days of postoperation following THRA compared with their condition on preoperation day. Subjects consisted of 13 male and 7 female Patients operated with THRA between the age of 20 and 69 years with a mean age of 38.55(SD=15.1). Circumference of upper and lower leg was measured by tape, leg volume was determined according to formula (Moor & Thornton, 1987) with measurement of 8 circumferences of leg. Leg strength was measured by pressing the center of digital health meter in supine position. The results can be summarized as follows : 1. Circumference of operated thigh decreased significantly at 14 following THRA compared with preoperative value, while that of normal thigh decreased significantly at day 3, 7, 10 and 14 after THRA compared with preoperative value. 2. Circumference of midcalf in both operated and normal limb decreased significantly at day 3, 7, 10 and 14 following THRA compared with preoperative value. 3. Leg volume of operated lower limb decreased significantly at 10, 14 following THRA compared with preoperative value, while that of normal limb decreased significantly at day 7 & 10 after THRA compared with preoperative value.4. Leg strength of operated limb decreased significantly at day 3, 7, 10, 14 following THRA compared with preoperative value. No significant difference of normal leg strength was shown following THRA. 5. Circumference of midcalf differed significantly at day 14 after THRA between normal and operated extremity. From these results, it can be suggested that a decreased activity after THRA caused muscle atrophies in normal and operated extremity.

• 한국방재학회 논문집
• /
• 제7권2호통권25호
• /
• pp.1-6
• /
• 2007

콘크리트내의 수량이 증가하면 내구성저하등에 다양한 문제점이 발생한다. 이러한 이유로 단위수량의 측정방법인 정전용량법, 고주파가열법, 단위용적질량법을 이용하여 단위수량의 변동을 관리하고 있다. 특히 일본에서는 단위수량 변동$({\pm}10,\;15,\;20kg/m^3$ 등)에 대한 관리지침을 규정하고 있다. 그러나 일본의 지침은 내구성 저하를 고려하지 않고 있으며, 제조오차와 측정오차를 확률적으로 고려하여 합부 판정기준 값을 정하고 있다. 이에 본 연구에서는 관리오차에 의한 가수 및 인위적인 가수 등에 의한 콘크리트 내의 수량 변화가 콘크리트의 내구성저하에 미치는 영향을 검토하고자 하였다.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.204-211
• /
• 2018

Water+N-Methyldiethanolamine (MDEA), Water+2-Amino-2-Methyl-1-Propanol (AMP), MDEA+AMP의 이성분계, Water+MDEA+AMP의 삼성분계에서 밀도를 Anton Paar DMA4500 밀도계를 이용하여 303.15 K에서 333.15 K의 온도범위에서 10 K 간격으로 혼합물의 전체 조성에서 측정하였다. 과잉부피 실험값은 실험적으로 측정된 밀도결과로부터 얻어졌고 Redlich-Kister-Muggianu 식으로 상관하였다. 이성분계로부터 얻은 매개변수를 이용하여 삼성분계에 대한 계산을 수행하였다. 삼성분계의 계산에는 하나의 추가적인 매개변수를 필요로 한다. 검토한 모든 이성분계와 삼성분계는 측정된 조건에서 과잉부피가 음의 값을 가지므로 완전히 섞임을 알 수 있다.

• 대한의용생체공학회:의공학회지
• /
• 제36권4호
• /
• pp.115-122
• /
• 2015

A standard air flow generator system was developed to generate air flows of various levels simultaneously applied to two different air flow transducer modules. Axes of two identical standard syringes for spirometer calibration were connected with each other and driven by a servo-motor. Linear displacement transducer was also connected to the syringe axis to accurately acquire the volume change signal. The user can select either sinusoidal or square waveform of volume change and manually input any volume as well as maximal flow rate levels ranging 0~3 l and 0~15 l/s, respectively. Various volume and flow levels were input to operate the system, then the volume signal was acquired followed by numerical differentiation to obtain the air flow signal. The measured volumes and maximal air flow rates were compared with the user input data. The relative errors between the user-input and the measured stroke volumes were all within 0.5%, demonstrating very accurate driving of the system. In case of the maximal flow rate, relatively large error was observed when the syringe was driven very fast within a very short time duration. However, except for these few data, most measured flow rates revealed relative errors of approximately 2%. When the measure and user-input stroke volume and maximal flow rate data were analyzed by linear regression analysis, respectively, the correlation coefficients were satisfactorily higher than 0.99 (p < 0.0001). These results demonstrate that the servo-motor controls the syringes with enough accuracy to generate standard air flows. Therefore, the present system would be very much practical for calibration process as well as performance evaluation and comparison of two different air flow transducer modules.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.37-43
• /
• 2020

Progressive drawing processing is one of the manufacturing processes used to mass-produce a variety of products on the industrial site. In this study, the goal is to achieve a uniform product thickness of at least 1.3mm by reducing the wall thickness of the coupler parts used in automotive air conditioning systems to within 15% using A5052-H32 materials. The progressive die was designed using Blank's law of volume invariance. Due to the characteristics of the drawing process, the material thickness in the punch R part decreases and the thickness in the die R part increases. When designing the progressive die of the coupler part, an ironing method, a push back method, and a stand-alone die pad method were applied to each process to design a mold in consideration of the drawing rate and to artificially adjust the thickness change. The suitability of the method used in die design was investigated by measuring the thickness change of forming parts for each process. In the final part, it was confirmed that the thickness measurement values of the five regions of a radial line were implemented as 1.34-1.36 mm.

• 대한방사선치료학회지
• /
• 제31권2호
• /
• pp.7-12
• /
• 2019

목 적: 골반부 방사선 치료 시 방광체적에 따라 방사선 조사범위가 달라지기 때문에 방광체적을 조절하여 치료를 진행한다. 따라서 본 연구에서는 초음파펄스진단장치(BVI 6100, (주)메디칼써프라이)를 이용하여 방광체적 변화를 추적하여 BVI의 정확성을 평가하고자 한다. 대상 및 방법: 2017년 1월부터 2018년 9월까지 부산대학교병원에서 골반부 방사선 치료를 받은 환자 19명을 대상으로 하였다. 치료 시 BVI를 이용하여 획득한 방광체적과 CBCT영상에서 획득한 방광체적을 구간별로 비교한 후 그 유의성을 평가하였다. 결 과: 전체 체적 구간에서의 BVI와 CBCT는 r=0.773의 유의한 상관관계가 나타났으나 치료계획영상에서의 방광체적을 기준으로 p값이 125~175cc에서는 0, 175~275cc에서는 0.05보다 낮게, 그리고 275~375cc에서는 0.05보다 높게 나타났다. 결 론: 본 연구에서는 방광체적이 275cc 이상의 환자의 경우 BVI와 CBCT영상 간의 방광체적이 유의성이 있으나 방광을 비우는 환자의 경우 BVI측정의 신뢰성이 떨어진다고 판단할 수 있었다. 따라서 175~275cc 환자에 대해서는 BVI의 보정값을 이용하여 적절한 체적오차허용범위를 사용하면 유의한 값을 얻을 수 있을 것이다.