• The Research Journal of the Costume Culture
• /
• v.24 no.4
• /
• pp.431-440
• /
• 2016

The purpose of this research is to revive the colors of combination dyeing and mixed dyeing with natural dyestuffs. The fabrics used were cotton and rayon. The natural dyestuffs used in this research were indigo, Phellodendron amurense, and Caesalpinia sappan. The effects of combination dyeing were as follows. First, all samples showed deeper colors. Second, according to the results of the surface K/S measurement, while the surface K/S of cotton was over 15, that of rayon was over 17. Third, the results of the light fastness measurement showed the superiority (by over grade 4) of all the samples, except in the case of rayon fiber sample no. 6 (which had been pre-dyed with indigo five times before being dyed with P. amurense once and then being dyed with C. sappan once). In the color fastness to washing measurement, all fibers showed superiority (by over grade 3~4). In addition, the color fastness to dry cleaning of all fibers was satisfactory or excellent (by over grade 3). Fourth, according to the results of the tensile strength measurement, it tended to decrease in the case of cotton and increase in the case of rayon. Fifth, the results of the density measurement showed that the density of cotton decreased by about 15~20% in the case of warp and 10% in the case of weft for all samples. The density of rayon decreased 20% in the case of warp for all samples and increased 30% in the case of weft for all samples.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.141-150
• /
• 2011

This is a study on the status of color scheme of domestic office furniture. In order to pursue the planned and effective usage of color on office furniture, we investigate and analyze the status of used color based on products from four domestic office furniture companies. Once we review the definition and characteristics of office furniture, we theoretically investigate the importance of correct color planning and psychological effect based on the psychological theory as research methods. In addition, objective condition of color analysis is presented by clearly stating the color measurement which is used in this study and the NCS as analysis standards, and status of the usage of color is investigated and analyzed based on representative products from four domestic office furniture companies. Results showed that only five products which are 26.3% out of 19 products from four companies achieved a good balance based on both color harmony theories. We hope that studies to recognize the importance of usage of correct color on the office furniture, to improve the office environment and to increase the efficiency of work will be conducted continuously.

• Journal of the Korean Society of Visualization
• /
• v.17 no.3
• /
• pp.59-65
• /
• 2019

Phosphor particles ((Sr,Mg)₂ SiO₄:Eu²⁺ were suspended in deionized water in quartz cuvette and used for measuring liquid temperature field by using two-color-ratio method. In the temperature range of 23~77℃, it showed the relative error from 2.4% to 4% and the temperature sensitivity of 0.65 %/℃ at 30℃ and 0.95 %/℃ at 77 ℃. This performance is comparable to measurement techniques using thermographic liquid crystal or laser induced fluorescence or other thermographic phosphor particle. Among investigated potential error sources, the particle number density affected the intensity ratio and the temperature, but the effect of laser fluence was not evident.

• Journal of Biosystems Engineering
• /
• v.19 no.4
• /
• pp.380-396
• /
• 1994

A personal computer based color machine vision system with video camera and fluorescent lighting system was used to generate images of stationary tobacco leaves. Image processing algorithms were developed to extract both the geometric and the color features of tobacco leaves. Geometric features include area, perimeter, centroid, roundness and complex ratio. Color calibration scheme was developed to convert measured pixel values to the standard color unit using both statistics and artificial neural network algorithm. Improved back propagation algorithm showed less sum of square errors than multiple linear regression. Color features provide not only quality evaluation quantities but the accurate color measurement. Those quality features would be useful in grading tobacco automatically. This system would also be useful in measuring visual features of other agricultural products.

• Journal of ILASS-Korea
• /
• v.7 no.3
• /
• pp.31-37
• /
• 2002

In previous study, diesel-methanol stratified injection system is manufactured and applied to a D.I. diesel engine in order to realize combustion improvement using methanol, which is oxygenated fuel with large latent heat. We know that NOx and soot is reduced by stratified injection of diesel fuel-methanol. Therefore, in the present study, combustion diagnosis using optical measurement is tried to make clear effect of methanol on simultaneous reduction of NOx and soot. Two-color method is used to measure flame temperature and KL value, which is approximately proportional to the soot consentration along the optical path. Laser induced scattering method was used to measure distribution of soot at two dimensional area. Also, it is compared exhaust characteristics of NOx and soot with results of optical measurement.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.716-727
• /
• 2005

Comprehensive measurements for velocity and temperature fields have been conducted. A Micro PIV 2-color LIF system have been setup to measure the buoyancy driven fields in a 1-mm heated channel with low Grashof-Prandtl numbers [$86]. Fluorescence microscopy is combined with an MPIV system to obtain enough intensity images and clear pictures from nano-scale fluorescence particles. The spatial resolution of the Micro PIV system is $75{\mu}m\;by\;67{\mu}m$ and error due to Brownian motion is estimated $1.05\%$. Temperature measurements have achieved the $4.7\;{\mu}m$ spatial resolution with relatively large data uncertainties the present experiment. The measurement uncertainties have been decreased down to less than ${\pm}1.0^{\circ}C$ when measurement resolution is equivalent to $76\;{\mu}m$. Measured velocity and temperature fields will be compared with numerical results to examine the feasibility of development as a diagnostic technique.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.337-338
• /
• 2006

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.92-97
• /
• 2006

Motion artifact of Display devices has a huge interest from industries and users recently. Among those artifacts, color break up (CBU) is one of the key degrading characteristic in field sequential type displays. Unfortunately, there are no objective measurement methods for CBU. Here we introduce two different kinds of CBU and its measurement methods. The CBU characteristic of LCD, DLP, and PDP was measured and compared.

• Korean Journal of Rural Living Science
• /
• v.10 no.2
• /
• pp.28-36
• /
• 1999

The purpose of this study was to examine the best condition for dyeing silk in green color used kudzu-vine leaves which were available everywhere in our country except winter. Dyeing experiments were done under various dyeing conditions according to extracting method of dyebath from kudsu-vine leaves, pH of dyebath, dyeing time, concentration of dyebath and mordants which were treated after dyeing. Color difference ($\Delta$E) and Munsell's HV/C and color fastness to drycleaning, washing, perspiration and light were measured. The main results were as follows : 1. The color difference of dyed silk increased in dyebath B & C which were extracted in alkali water comparing with dyebath A which was extracted in distilled water. In dyebath B & C, the color difference was the highest in case of dyebath pH 5.0. 2. The colors of fabrics dyed in dyebath A were mainly yellow and the colors in dyebath B & C were yellow green. 3. The color differences of dyed silk increased according to dyeing time and concentration of dyebath. 4. The color were changed with the treatment of mordants. The most strong green color could get in Cu mordant treatment in dyebath C, pH 5.0, and concentration 4. 5. The peak of reflectance within the visible light of the fabric dyed in the most strong green color could be seen in $\lambda$500-520nm. 6. On the whole, the colorfastness of experimental fabrics dyed in dyebath B, C and Cu mordant treatment was good except the colorfastness to the light.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.653-660
• /
• 2017

Recently, consumers' evaluation and purchase of online design has been increasing due to the popularization of designing through personal computers, but there has not been enough studies on consumers' brain wave responses depending on the change of PC monitor's color. Therefore, this study investigated how brain waves changed when different background colors with gray patterns were presented through PC monitors. Six background colors with same tone of slightly low saturation were selected, including ivory, yellow, pink, green, blue and pure white as a base color. The brightness and characteristics of color used were analyzed using the luminance meter and color scales. Brain wave was measured by EEG measurement equipment. Brain wave measurement was carried out with 9 subjects at 6 points: F3, F4, T3, T4, O1, and O2. Stimuli were shown for 15 seconds each and black screens were displayed for 15 seconds between each stimulus. As results, the brain waves at O1 responded sensitively by different background colors, followed by F4 and T4. Brain index such as 'RT', 'RA', 'RG', 'RSA', and 'RAHB' showed significant differences depending on the background color at O1, whereas 'RST' differed at F4. Yellow and blue backgrounds pair was the only stimuli that showed significant differences in six brain indices mentioned. Yellow background had higher value of 'RG' at O1 and higher 'RST' at F4, indicating yellow background enhanced concentration. Blue background activated 'RT', 'RA', 'RSA', 'RAHB' at O1, meaning blue background induced calm and stable state.