• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.461-467
• /
• 2009

Exposure analysis is a critical component of determining the health impact of pollutants. Global positioning systems (GPS) could be useful in developing time-location information for use in exposure analysis. This study compares four low cost GPS receivers with data logging capability (Garmin 60, Garmin Forerunner 201, GeoStats GeoLogger and Skytrx minitracker MT4100) in terms of accuracy, precision, and ease of use. The accuracy of the devices was determined at two known National Geodetic Survey points. The coordinates logged by the devices were compared when the devices were carried while walking and driving. The Garmin 60 showed better accuracy and precision than the GeoLogger when they were placed at the geodetic points. The Forerunner and Skytrx did not record when they were kept stationary. When the subject wore the devices while walking, the location of the devices differed by about 8 m on average between any two device combinations involving the four devices. The distance between the coordinates logged by the devices decreased when the devices were carried with their antennas facing the sky. All the devices showed similar routes when they were used in a car. All the devices except the Forerunner had satisfactory signal reception when they were worn and when they were carried in the car. The GeoLogger is less comfortable for the subject because of specific wearing requirements. This evaluation found that the Garmin 60 and the Skytrx may be useful in personal exposure analysis studies to record time-location data.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.200-207
• /
• 2003

In this paper we present a new method of measuring the relative distance of two point objects in three-dimensional space by using phase-shifting digital holography. In our system the reference beam of a spherical wave is used instead of a plane wave. The system is computer simulated and built on an optical table for experiments. It is shown from computer simulations and experiments that the relative distance can be measured without the exact information on the reference beam used in the hologram record. It is shown from experiments that the relative distance between two point objects separated by 0.5 cm in the distance of about 300 cm from the CCD can be measured with an error less than 10％.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.345-352
• /
• 2012

Objective: The aim of this study is to evaluate the accuracy and reliability of Spine-Pelvis Monitor(SPM) that was developed to measure 3-dimensional motion of spine and pelvis using tilt sensor and gyro sensor. Background: The main cause of low back pain is very much associated with the task using the low back and pelvis, but no measurement technique can quantify the both spine and pelvis. Method: For testing the SPM, 125 angles from three anatomical planes were measured three times in order to evaluate the accuracy and reliability. The accuracy of SPM in measuring dynamic motion was evaluated using digital motion analysis system. The motion pattern captured by two measuring methods was compared with each other. In result, the percentage error and Cronbach coefficient alpha were calculated to evaluate the accuracy and reliability. Results: The percentage error was 0.35% in flexion-extension on sagittal plane, 0.43% in lateral bending on coronal plane, and 0.40% in twisting on transverse plane. The Cronbach coefficient alpha was 1.00, 0.99 and 0.99 in sagittal, coronal and transvers plane, respectively. Conclusion: The SPM showed less than 1% error for static measurement, and showed reasonably similar pattern with the digital motion system. Application: The results of this study showed that the SPM can be the measuring method of spine pelvis motion that enhances the kinematic analysis of low back dynamics.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.377-382
• /
• 2015

The purpose of this study was to evaluate the validity and reliability of plaque scoring system using new Qraycam (All in One Bio, Korea) device which enables plaque score without tooth disclosing. This study measured Quigley-Hein index and plaque control record by both Qraycam and disclosing agent on 64 elderly people and checked degree of congruence between the two methods. Reliability was evaluated with the mean of measured values, kappa index and intraclass correlation coefficient statistical analysis. The analysis of the plaque scores showed a high agreement between the measured values according to the method of measurement and the measured part. The mean of plaque index of anterior labial were not significantly different according to measurement method. The kappa index was higher by Qraycam and tooth disclosing method of plaque index. Therefore, it was verified that Qraycam has sufficient reliability as screening tool for plaque scoring system.

• Journal of Sasang Constitutional Medicine
• /
• v.27 no.2
• /
• pp.222-230
• /
• 2015

Objectives The purpose of this study is to design a research to find clinical factors involved in the decision-making process for determining the constitutional prescription based on prospective clinical data. Methods We have created a draft of the case report form. Therefore, seven constitutional experts was interviewed for additional items to be important used to determine the constitutional prescription in clinic. Interviews were done from December 2012 to March 2014, experts per person 2-3 times, took time of about 120 minutes per interview. Since then, we developed the final case report form through the expert meeting. At the same time, the developing the electronic case report form (eCRF) and the protocol to collect constitutional treatment cases was also discussed. Results & Conclusions The items of the case report form were subject general, lifestyle, health measurement, record of expert, prescription and evaluation after medication. The part of the clinical symptoms of the record of expert allowed to be recorded in the 5-point scale for the collection of quantitative data as much as possible. Assuming a re-visit of the patient, if necessary, twice the recording were to be possible. At the same time, the eCRF and the protocol to collect constitutional treatment cases were also developed. In this study, it will be able to more objectively standardize the medical decision making process that the experts of constitutional prescription decision. As a result, it will be possible to provide the standardized constitutional medical services.

• Journal of the Korean Society of Safety
• /
• v.36 no.5
• /
• pp.71-78
• /
• 2021

There are regularly planned overhaul periods in thermal power plants, which involve the maintenance of the boiler of the power plants. However, thermal power plants workers are always exposed to risk during overhaul periods owing to the narrow space and significant dust inside the boiler. Therefore, it is essential to develop a safety monitoring system that is suitable for operating in this type of environment. In this study, we developed not only a worker three-dimensional (3D)-location monitoring system that can monitor and record the entry/exit of workers, their 3D-location, and fall accidents but also a method to secure the working environment and operation efficiency. This system comprises of a worker tag, which was equipped with an inertial measurement unit, a barometric pressure sensor, and a Bluetooth low energy (BLE), and the tags were given to each worker. In addition, the location of workers inside the boiler was measured using a pedestrian dead reckoning (PDR) method and BLE beacons. The location data of the workers tag were transmitted to the integrated database (DB) server through a gateway, and to the administrator monitoring system. The performance of the system was demonstrated inside an actual thermal power plant boiler, and the accuracy and reliability of the system were verified through a number of repeated tests. These results provide insights on designing a new system for monitoring enclosed spaces.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.7 no.2
• /
• pp.275-284
• /
• 2001

This study was conducted to examine the nurses' role in Oriental medical hospital and the necessity of Oriental medical nursing system. Data were collected from 194 nurses in 14 Oriental medical hospitals located in Seoul, Busan, Daegu, Kwangju, Kangwon Province, Kyungbuk Province from July 1, 2000 to September 10, 2000. The results of this study are summarized as follows. 1. In nurse's level of knowledge of acupuncture point in current Oriental nursing practice, 28.4% of the respondents did not know acupuncture points at all, while 30.9% knew them a little. 40.7% of them did not almost know them. 2. According to nurses' role in Oriental medical hospital, they did a lot of duty for measurement of vitality, medical record, Dr. notifying, communication with medical team and related departments, and observation of patients' conditions. They did a little duty for handling Oriental medical practice. 3. As the subject of curriculum for Oriental medical nursing, 52.1% chose training course for Oriental medical nursing, while 25.8% chose inclusion of the curriculum in the school of nursing. 39.2% replied that they would take the training course for Oriental medical nursing, while 3.6% answered that they would not take it. 68.6% of them thought that Oriental medical nursing system should be introduced, while 4.1% objected to introducing the system. The nurses in Oriental medical hospitals are working with many problems because of their role confusion and low level of knowledge in Oriental medicine. Therefore, systematic curriculum and research related to Oriental medical nursing are necessary. Oriental medical nursing system must be introduced in order to make nurses have professional knowledge and skill in Oriental medicine. The nurses then can provide services of good quality for the patients.

• Physical Therapy Korea
• /
• v.17 no.2
• /
• pp.1-9
• /
• 2010

To develop effective training methods for strengthening a weakened quadriceps femoris muscle in hemiplegic patients, we examined the effects of maximal isometric contraction of the nonparalyzed knee joint on the electromyographic activities of the paralytic muscle. An electromyogram (EMG) was used to record the electromyographic activities of the paralytic quadriceps femoris muscle in 27 hemiplegic patients. The maximal isometric contraction was measured for each subject to normalize the electromyographic activities. The maximal isometric extension and flexion exercises were randomly conducted when the knee joint angles of the nonparalyzed knees were $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$. The patients were encouraged to maintain maximal isometric contractions in both knee joints during each measurement, and three measurements were taken. A one-minute rest interval was given between each measurement to minimize the effects of muscle fatigue. An average from the three values was taken as being the root mean square of the EMG and was recorded as being the maximal isometric contraction. The electromyographic activity obtained for each measurement was expressed as a percentage of the reference voluntary contraction, which was determined using the values obtained during the maximal isometric contraction. The results of this study are summarized as follows: First, when the knee joint angle of the nonparalyzed knee was $0^{\circ}$, the electromyographic activities of the paralytic medial aspect of rectus femoris were related to measurement by a maximal isometric flexion exercise than by an extension exercise (p<.05). Second, when the knee joint angle of the nonparalyzed knee was $90^{\circ}$, the electromyographic activities of the paralytic lateral aspect of rectus femoris were related to measurement by a maximal isometric flexion exercise than by an extension exercise (p<.05). The results show that myoelectrical activities of paralytic quardriceps were not related to measurement angles and exercise directions of the nonparalized knee joint. Studies on various indirect intervention to improve muscular strength of patients with nervous system disorders of the weakened muscle should be constantly conducted.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.496-502
• /
• 2016

In this paper, we proposed and implemented a GUI-based system to recognize and record measured values of digital instruments in the industrial site through image processing. Unlike the existing vehicle license plate recognition system, the measured values of the measuring instrument are displayed on the LCD screen as digital numbers. So, the proposed system considers the decimal point, a negative sign, light reflected by LCD protective glass, and various disturbance factors. We used blob-labeling technique to recognize the numbers displayed on the LCD screen, the recognized number images were determined as certain numbers through the template matching, and recognized values were recorded in the storage device with measurement time. Therefore, the proposed system in this paper would reduce the burden of writing when recording the measured values of the inside/outside diameter or height of the product in the industrial site, so effective and errorless process management in production process is possible by preventing errors in recording measurements when written by hand.

• Nutrition Research and Practice
• /
• v.9 no.1
• /
• pp.99-105
• /
• 2015

BACKGROUND/OBJECTIVES: Compelling evidence indicates that consumption of trans-fatty acids (TFA) is associated with a wide range of diseases. However, few validated tools for TFA intake assessment are available in Korea. We aimed to validate a food frequency questionnaire (FFQ) estimating usual intake of TFA in Korean adults. MATERIALS/METHODS: Eighty-two healthy adults completed an FFQ with a 3-day diet record (3DDR), and 58 completed a second FFQ at a 1-month interval. To assess the reproducibility of the FFQ, we compared estimated TFA intakes from each FFQ. To assess the validity, we compared estimates from the FFQ with those from the 3DDR. RESULTS: The FFQ was reproducible (Spearman r = 0.71) and provided modest correlations with the 3DDR (Spearman r = 0.38). After adjustment for total energy intake, the correlations increased (r = 0.45). Measurement-error correction also de-attenuated the correlations (r = 0.57). When quintiles of the FFQ and 3DDR were joint-classified, 9% on average were misclassified into extreme quintiles. CONCLUSIONS: Our findings suggest that the developed FFQ is reproducible and reasonably valid in categorizing individuals according to TFA intakes among healthy young and middle aged adults in Korea.