• 한국환경과학회지
• /
• 제7권3호
• /
• pp.269-274
• /
• 1998

In order to develop of support medla for bloom reactor, physicochemical properties and attachability of surface of activated carbon, clay mineral, non-clay mineral, and waste mold sand were enamined. Measured physicochemical properties of materials were surface roughness, mean particle size, surface area, hydrophobicity, and surface charge. At a tested materials, activated carbon was the best attachable material and microorganisms were attached $20.1{\times}10^7CFU/cm^2$ at surface, compared with diatomaceous earth which were attached of $9.2{\times}10^7CFU/cm^2$ in our research, surface area and hydrophobicity show- ed more Influence than any other factor on attachment of microorganisms.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.651-655
• /
• 2011

We synthesized a novel cationic dendrimer consisting of a poly(amidoamine) dendrimer (PAMAM, generation 4) backbone with both L-arginine (Arg) at the termini and 6-aminohexanoic acid (Ahx) between the original core polymer and the peripheral Arg units. The sequential chemical modification of PAMAM G4 with Ahx and Arg resulted in higher transfection efficiency with much less cytotoxicity. PAMAM G4-Ahx-Arg formed stable polyplexes at weight ratios of 8:1 or higher (polymer: plasmid DNA), and the mean polyplex diameter was $180{\pm}20nm$. PAMAM G4-Ahx-Arg showed much higher transfection ability than PAMAM G4 or PAMAM G4-Ahx. Furthermore, PAMAM G4-Ahx-Arg was much less cytotoxic than PEI25KD and PAMAM G4-Arg. In addition to Arg grafting of the PAMAM dendrimer, which endows a higher transfection capability, the addition of Ahx spacer increased dendrimer hydrophobicity, introduced flexibility into the conjugated amino acids, and reduced cytotoxicity. Overall, it appears that the concomitant modification of PAMAM with Ahx and Arg could lead to new PAMAM conjugates with better performances.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제8권10호
• /
• pp.421-426
• /
• 2019

본 논문에서는 단백질 복합체에서 단백질 사이의 접촉 영역이 갖는 기하학적 특징을 가시화하는 방법을 제안한다. 단백질 또는 리간드가 요철이 있는 곡면으로 표현될 때, 두 곡면이 서로 접하면서 교차하지 않는 성질을 형태 상보성이라 한다. 단백질-단백질 또는 단백질-리간드 도킹 연구에서 형태 상보성과 화학적인 성질, 엔트로피 등이 접촉 영역의 발견에 중요한 역할을 한다는 것을 볼 수 있다. 일반적으로 형태 상보성이 높은 영역을 발견한 뒤, 이 영역에 속한 아미노산들의 잔기 극성 및 소수성 등을 이용하여 접촉 영역을 예측한다. 접촉 영역을 예측하기 위한 연구에서는 기존에 알려진 복합체에서 접촉 영역이 갖는 기하학적인 특징을 조사하는 작업이 필요하며, 이를 위해 기하학적인 특징을 가시화하는 작업은 필수적이다. 본 논문에서는 단백질 복합체에서 접촉 영역을 발견하고, 두 개의 단백질 각각의 접촉 면에 속한 근거리의 정점들의 기하학적인 특징을 법선 벡터 및 평균 곡률로써 가시화하는 방법을 제안한다.

• 환경생물
• /
• 제34권1호
• /
• pp.48-55
• /
• 2016

본 연구는 자외선 광분해에 의한 비스페놀 A (BPA)의 에스트로겐 활성 저감에 미치는 하수처리장 방류수 유기물질의 영향을 조사하였다. 방류수 유기물질과 표준으로 사용한 스와니강 자연 유기물질은 극성에 따라 소수성, 반친수성, 친수성 분획으로 분리하였다. 특이 자외선 흡수 (SUVA) 분석 결과, 방류수 유기물질은 높는 소수성을 가지고 있는 자연 유기물질과 다르게 소수성이 낮은 미생물 기원 유기물질과 유사한 특성을 나타내었다. 3시간의 자외선 조사는 방류수 및 자연 유기물질의 극성에 따라 SUVA 값을 유의하게 감소시켰다 (p<0.0001). 유기물질이 없는 조건에서, BPA($5.0{\times}10^{-5}M$)의 상대 에스트로겐 활성도는 자외선 광분해에 의해 86%에서 63%로 감소하였다. 그러나 유기물질이 있는 조건에서 상대 에스트로겐 활성도는 평균적으로 68%에서 37%로 감소하였으며, 유기물질의 종류 (방류수 또는 자연유기물질) 및 극성 (소수성, 반친수성, 친수성)과 유의한 차이를 나타내지 않았다 (p>0.05). 결과적으로, 유기물질이 있고 없는 조건에서 자외선 광분해에 의해 감소한 BPA의 상대 에스트로겐 활성도는 각각 31%와 23%였으며, 이것은 방류수와 자연 유기물질 모두 광분해에 의한 BPA의 에스트로겐 활성 저감을 촉진시킨다는 것을 제시한다.

• 대한미생물학회지
• /
• 제35권4호
• /
• pp.317-324
• /
• 2000

Candida albicans is one of the most frequently isolated fungal pathogens in human. Recently, the prevalence of candida infection has markedly increased, partially due to the increase of immunocompromised hosts. Proposed virulence factors of the pathogenic Candida are the ability to form hyphae to adhere to epithelial cell surfaces, and to secrete acid proteinases and phospholipases. We measured the relative cell surface hydrophobicity (CSH) and the ability of proteinase production (PROT), phospholipase production (PLase), adherence to host epithelium (ADH), and hyphal transition (Germ). The relative risk of virulence factors was analyzed by lethality test in murine model of hematogeneously disseminated candidal infection. According to Cox's proportional hazard analysis, the statistically significant virulence factors were PROT, ADH, and CSH. PROT was the highest risk factor of them. To evaluate the applicability for the diagnosis and treatment of Candidiasis, we examined the protective effect of the active and passive immunizations with the materials purified from virulence factors and antibodies to them in Candia-infected mice model. The mean survival times of active and passive immunized groups were slightly longer than those of non-immunized groups.

• The Journal of Advanced Prosthodontics
• /
• 제1권1호
• /
• pp.1-5
• /
• 2009

STATEMENT OF PROBLEM. Poor wettability of denture relining materials may lead to retention problems and patient discomfort. PURPOSE. Purpose of this study is to compare and evaluate wettability of nine denture relining materials using contact angle measurements under air and water storage over time. MATERIAL AND METHODS. Nine denture relining materials were investigated in this study. Two heat-curing polymethyl-methacrylate(PMMA) denture base materials: Vertex RS, Lang, one self-curing polyethyl-methacrylate(PEMA) chairside reline resin: Rebase II, six silicone relining materials: Mucopren soft, Mucosoft, $Mollosil^{{R}}$ plus, Sofreliner Touch, GC $Reline^{TM}$ Ultrasoft, Silagum automix comfort were used in this experiment. Contact angles were measured using high-resolution drop shape analysis system(DSA 10-MK2, KRUESS, Germany) under three conditions(in air after setting, 1 hour water storage, and 24 hours water storage). Nine materials were classified into three groups according to material composition(Group 1: PMMA, Group 2: PEMA, Group 3: Silicone). Mean values of contact angles were compared using independent samples t-test and one-way ANOVA, followed by a Scheffe's post hoc analysis($\alpha$=0.01). RESULTS. Contact angles of materials tested after air and water storage increased in the following order: Group 1(PMMA), Group 2(PEMA), Group 3(Silicone). Heat-cured acrylic denture base resins had more wettability than silicone relining materials. Lang had the highest wettability after 24 hours of water storage. Silicone relining materials had lower wettability due to their hydrophobicity. Wettability of all denture relining materials, except Rebase II and $Mollosil^{{R}}$ plus, increased after 24 hours of water storage. CONCLUSIONS. Conventional heat-cured resin showed the highest wettability, therefore, it can be suggested that heat-cured acrylic resin is material of choice for denture relining materials.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2241-2255
• /
• 2018

RSM methodology was applied to present mathematical models for the fabrication of polyvinylidene fluoride (PVDF) dual-layer hollow fibers in membrane distillation process. The design of experiments was used to investigate three main parameters in terms of polymer concentration in both outer and inner layers and the flow rate of dope solutions by the Box-Behnken method. According to obtained results, the optimization was done to present the proper membrane with desirable properties. The characteristics of the optimized membrane (named HF-O) suggested by the Box-Behnken (at the predicted point) showed that the proposed models are strongly valid. Then, a morphology study was done to modify the fiber by a combination of three types of a structure such as macro-void, sponge-like and sharp finger-like. It also improved the hydrophobicity of outer surface from 87 to $113^{\circ}$ and the mean pore size of the inner surface from 108.12 to 560.14 nm. The DCMD flux of modified fiber (named HF-M) enhanced 62% more than HF-O when it was fabricated by considering both of RSM and morphology study results. Finally, HF-M was conducted for long-term desalination process up to 100 hr and showed stable flux and wetting resistance during the test. These stepwise approaches are proposed to easily predict the main properties of PVDF dual-layer hollow fibers by valid models and to effectively modify its structure.

• Applied Biological Chemistry
• /
• 제46권4호
• /
• pp.305-310
• /
• 2003

Hydrophobic core가 변이된 유비퀴틴 단백질이 pH 2 용액에서 보이는 구조적인 특성을 여러 분광학적 방법으로 측정하였다. 낮은 pH값을 갖는 용액에서 이 변이 유비퀴틴의 intrinsic tryptophan fluorescence emission spectrum은 unfolded 상태보다 약간 blue shift되어 있고 또한 그 intensity도 상당히 낮게 나타났다. 이는 이 용액 조건에서 이 변이 유비퀴틴의 삼차구조가 약간 남아 있는 것을 의미한다. 같은 용액에서 이 변이 유비쥐틴의 far-UV circular dichroic spectrum은 native 상태나 unfolded 상태의 spectrum과 현저히 달랐으며 220 nm 에서의 molar ellipticity 값을 통하여 볼 때 pH 2인 용액에서 상당량의 이차구조를 지니고 있었다. 또한 같은 용액에서 이 변이 유비퀴틴은 hydrophobic dye인 8-anilinonaphthalene-1-sulfonic acid(ANS)외 fluorescence emission intensity를 증가시키고 fluorescence emission maximum이 짧은 파장에서 나타나게 하였다(blue shift). 이러한 현상은 pH 2 용액에서 이 변이 유비퀴틴의 hydrophobic core가 느슨하여져서 hydrophobic dye인 ANS가 결합할 수 있는 구조를 띠고 있음을 나타낸다. 이러한 분광학적인 관찰은 이 변이 유비귀틴이 pH 2인 용액에서 상당량의 이차구조를 지니고 있지만 hydrophobic core는 느슨하게 형성된 molten globule과 같은 형태를 지니고 있음을 나타낸다. 이 변이 유비퀴틴의 molten 히obule 형태는 단백질 폴딩 반응의 경로를 연구할 수 있는 좋은 모델이 될 수 있을 것으로 생각된다.

• 대한화학회지
• /
• 제61권6호
• /
• pp.346-351
• /
• 2017

This study was planned considering the chain length, hydrophilicity, and hydrophobicity of the additives to be used in the polymerization, while various ophthalmic lenses that use various additives with similar water contents were manufactured before their optical and physical properties were compared and analyzed. With regard to the additives required for manufacturing high-, medium-, and low-water content lens groups, HEA (hydroxyethyl acrylate), PVP (polyvinylpyrrolidone), and NMV(N-methyl-N-vinylacetamide) were used as additives for preparing the high-water content lens group, HEMA(2-hydroxyethyl methacrylate), HPMA(hydroxypropyl methacrylate) and BD(1,4-butanediol) were used for the medium-water content lens group. For the low-water content lens group, BMA(buthyl methacrylate), BDDA(1,4-butanediol diacrylate), and Bis-GMA(bisphenol A glycerolate diacrylate) were used, respectively. The average water content of HEA was 40.14%; that of PVP, 39.63%; and that of NMV, 40.52%. The mean of water content was 35.92% for HEMA, 35.74% for BD, and 34.62% for HPMA. For the low-water content lens group, the mean of water content was 26.69% for BMA, 27.76% for BDDA, and 26.14% for Bis-GMA. With regard to the results of the water content measurement using a moisture analyzer, the average water content of the high-water content lens group was 41.34% for HEA, 42.62% for PVP, and 42.73% for NMV. Finally, for the low-water content lens group, the average water content was 28.62% for BMA, 28.82% for BDDA, and 28.32% for Bis-GMA. The measurements of the water contents of the lenses using the two methods showed that the water content and refractive index of the lenses were similar in all the lens groups. The measurements of the contact angles, however, showed a different wettability value for each lens with a similar water content. Also, the change tendency of the lens curvature according to the change of time showed that the change amount became larger and the recovery time became longer from the lens samples with a lower water content to those with a higher water content. Based on these results that will be helpful for the study of ophthalmic lenses.