• 한국산학기술학회논문지
• /
• 제9권1호
• /
• pp.154-159
• /
• 2008

본 연구에서는 수자원 기초자료 중 매우 중요하고 효과적인 유량측정방법을 위해 가장 먼저 결정하여야할 평균유속을 어떻게 결정할지를 제안코자 하며, 이를 위하여 현재까지 가장 널리 응용되고 있는 평균유속공식인 Manning공식과 최근에 그 효용성이 입증된 Chiu의 유속공식과의 상호관계에 대하여 분석 검토하여, 수로경사가 변화하는 경우나 유사유무에 관계없이 주어진 단면에서의 엔트로피 값, 즉 평형상태를 유지하려는 경향이 있음을 증명하였다. 따라서 인공수로에 관련된 간단한 수리입력 자료만 있다면 그동안 취득하기 어려운 $u_{max}$와 전체유속분포 산정에 매우 유용하게 사용될 수 있다고 사료된다.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.103-119
• /
• 1994

The purpose of this study was to evaluate the mandibular movements of TMD patients comparing to normal persons. Sirognathograph was used to measure five parameters of mandibular movements of twenty normal persons and eight TMD patients. Five parameters were (1) Maximum opening during maximum opening and closing, (2) Mean velocity during maximum opening and closing, (3) Maximum opening during unilateral chewing, (4) Mean velocity during unilateral chewing, (5) Consistency of mandibular movement during unilateral chewing. Based on above results, new Mandibular Movement Index(M.M.I.) was formulated and compared to Helkimo's Clinical Dysfunction Index by measuring two indices before treatment and 2 weeks, 4 weeks, 6 weeks, 8 weeks after treatment. The conclusions were as follows: 1, The amounts of maximum opening and mean velocity during maximum opening and closing of TMD patients were less than those of normal persons(p<0.01). 2. The amounts of maximum opening and mean velocity during unilateral chewing of TMD patients were less than those of normal persons(p<0.05) (P<0.01). 3. Although TMD patients showed limited mandibular movements during unilateral chewing, the consistency of mandibular movements was better than that of normal persons(p<0.05). 4. Both mandibular movement index and Helkimo's Clinical Dysfunction Index, were useful in diagnosing TMD patients.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-14
• /
• 2004

The lift-off characteristics of the triple flame have been studied experimentally with various mean velocities and concentration gradients using a multi-slot burner, which can control the concentration gradient and the mean velocity independently, Lift-off height, axial maximum velocity, flame temperature, and some other characteristics were examined for methane and propane flame, It was found that minimum values of the lift-off heights exist at a certain concentration gradient for constant mean velocity, and this result implies that the propagation velocity has a maximum value at this condition, OH radical distribution was measured with LIF method and velocity variation along streamline was measured with PlV system. In addition maximum temperature along streamline was measured with CARS system. The intensity of the diffusion flame affects on the propagation velocity of triple flame in the region of very weak concentration gradient.

• 대한치과보철학회지
• /
• 제27권2호
• /
• pp.143-154
• /
• 1989

The purpose of this study was to investigate the mandibular opening and closing movements at mandibular incisor region and clinical rest position in normal subject using the newly developed electric mandibular movement analyzing device, (M.K.G.-K6 diagnostic system, Myo-tronics Inc. Seattle, WA, U.S.A.) The 58 normal subjects, who were students of the College of Dentistry, Chonbuk National University, were selected according to sampling criteria. The obtained results were as follows: 1. There was no significant difference of distribution of opening and closing movement patterns at mandibular incisor region between male and female. There was significant difference between habitual and maximum movement patterns both in sagittal and frontal plane. 2. Although the percentage of distribution of crossover pattern was highest in all cases, but there were significant differences between patterns only at habitual opening and closing movement in sagittal plane. 3. The mean of maximum opening was $47.29{\pm}4.68mm$ in male and $42.15{\pm}4.95mm$ in female. Therefore the mean of maximum opening was larger in male than in female. 4. The mean of maximum laterotrusion in frontal trajectory was larger to the left than to the right. Also the proportion of left deviation at maximum opening position was larger than that of other cases. 5. The mean of maximum opening and closing velocity was higher in male than in female and the mean of closing velocity was higher than that of opening velocity. Also the amount of separation from the centric occlusion was higher in maximum closing velocity than in maximum opening velocity. 6. Clinical rest position was $1.70{\pm}0.99mm$ inferior, $0.74{\pm}0.57mm$ anterior, $0.99{\pm}0.51mm$ right from centric occlusion and the A/V ratio was 1:2.7.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.793-804
• /
• 1994

Turbulence intensity caused by piston movement was almost as same tendency as the piston speed. The turbulence intensity was increased from 0.39m/s to 0.79m/s when mean piston speed increased from 2.33m/s to 4.67m/s. In this case the maximum turbulence intensity caused by piston speed was decreased about 82 percent near the top dead center at the end of compression stroke. The maximum turbulence intensity was created from 12m/s to 22m/s when inlet flow velocity was increased from 22m/s to 45m/s. Also turbulence intensity caused by inlet flow velocity was linearly increased from 0.97m/s at top dead center at the end of compression stroke. The ratio of turbulence intensity and mean inlet flow velocity was about 3 percent for inlet flow velocity.

• Journal of Biosystems Engineering
• /
• 제43권3호
• /
• pp.194-201
• /
• 2018

Purpose: The objective of this study was to propose a formula for the theoretical grain mean transport velocities of an elliptically moving oscillator by modifying the grain mean transport velocity formula applied to linear motion and to compare the calculated values with the experimental values of grain mean transport velocity. Methods: The values of the throwing index ($K_v$) and the maximum horizontal velocities for various positions on the elliptical oscillator were obtained using kinematic analysis. To obtain the actual grain transport velocity, the mean transport velocities of perilla grains at six positions on the sieve surface were measured using a high-speed camera and compared with the theoretical values. The cam with an eccentric bearing on the oscillator was designed to be eccentric by 1.6 cm so that the lengths of the major axis of the elliptical motion were 3.2-3.6 cm. The material used in the experiments was perilla grain. Results: The experimental result was consistent with the theoretical value calculated using the proposed formula ($R^2$ is 0.80). It is considered that the angle difference between the maximum accelerations in the directions vertical and horizontal to the sieve has as much influence on the grain mean transport velocity as the value of Kv itself. Conclusions: It was possible to theoretically obtain the grain mean transport velocities through a screening device in elliptical motion by modifying the formula of the grain mean transport velocities used in linear motion.

• 대한물리치료과학회지
• /
• 제11권1호
• /
• pp.14-19
• /
• 2004

Objective : This study obtained normative values for variable parameters of lumbar function with the isoinertial triaxial dynamometer in patients with chronic low back pain. Subjects and Methods : 30 patients(male 15, female 15) with chronic low back pain in this study. Variable parameters that were measured with the Isostation B-200 were lumbar range of motion, isometric maximum torques, and maximum velocities in three axis. Results : In patient male group mean R.O.M. was $82.9{\pm}12.5$ degrees in lumbar rotation, $76.5{\pm}17.1$ degrees in lumbar flexion/extension, and $64.3{\pm}14.5$ degrees in lumbar lateral flexion. In patient female group mean R.O.M. was $78.4{\pm}18.5$ degrees in lumbar rotation, $71.7{\pm}20.4$ degrees in lumbar flexion/extension, and $63.2{\pm}14.4$ degrees in lumbar lateral flexion. In patient male group mean isometric maximum torques was $64.7{\pm}23.8ft-lbs$ in lumbar rotation, $81.1{\pm}42.0ft-lbs$ in lumbar flexion, $122.2{\pm}43.6ft-lbs$ in lumbar extension, and $101.0{\pm}37.0ft-lbs$ in lumbar lateral flexion. In patient female group mean isometric maximum torques was $41.9{\pm}9.2ft-lbs$ in lumbar rotation, $49.9{\pm}23.9ft-lbs$ in lumbar flexion, $90.1{\pm}26.8ft-lbs$ in lumbar extension, and $62.0{\pm}16.7ft-lbs$ in lumbar lateral flexion. In patient male group mean maximum velocity of isoinertial exercise with low (25%) resistance was $102.4{\pm}28.8deg/sec$ in lumbar rotation, $108.9{\pm}32.2deg/sec$ in lumbar flexion/extension, and $103.5{\pm}30.4deg/sec$ in lumbar lateral flexion. In patient female group mean maximum velocity of isoinertial exercise with low (25%) resistance was $84.1{\pm}24.4deg/sec$ in lumbar rotation, $93.2{\pm}32.9deg/sec$ in lumbar flexion/extension, and $98.5{\pm}33.7deg/sec$ in lumbar lateral flexion. In patient male group mean maximum velocity of isoinertial exercise with high (50%) resistance was $74.0{\pm}20.9deg/sec$ in lumbar rotation, $98.7{\pm}32.8deg/sec$ in lumbar flexion/extension, and $85.0{\pm}25.8deg/sec$ in lumbar lateral flexion. In patient female group mean maximum velocity of isoinertial exercise with high (50%) resistance was $67.3{\pm}26.4deg/sec$ in lumbar rotation, $82.5{\pm}31.0deg/sec$ in lumbar flexion/extension, and $79.7{\pm}23.9deg/sec$ in lumbar lateral flexion. Conclusion : Maximum isoinertial velocities were more reliable and more significant than isometric maximum torque for the objective assessment of chronic low hack pain.

• Journal of the Korean Data Analysis Society
• /
• 제20권6호
• /
• pp.2941-2951
• /
• 2018

본 연구는 해양기상관측자료인 평균 풍속, 평균 기압, 평균 상대습도, 평균 기온, 평균 수온, 평균 최대파고, 평균 유의파고, 최고 유의파고, 최고 최대파고, 평균 파주기, 최고 파주기 등의 요인들이 꽃게의 출하건수에 미치는 영향을 음이항 회귀모형을 통해 확인하고 모형적합을 시도하였다. 염분과 수온이 갑각류의 성숙 및 산란에 영향을 미치며, 특히 수온은 성장에 관여하는 대사 작용에 영향을 끼친다고 알려져 있고 최근 지구온난화로 인해, 얼음이 녹으면서 바다의 유의, 최대, 평균파고와 파주기, 그리고 수온까지 영향을 미치고 있어 꽃게 출하건수를 예측하는데 있어 중요한 변수라고 생각할 수 있다. 분석결과 꽃게의 출하건수에 영향을 주는 요인은 평균 풍속, 평균 기압, 평균 상대습도, 평균 해수온도, 최대 파고, 평균 파주기, 최대 파주기로 결정되었다. 꽃게의 출하건수는 평균 풍속, 평균 기압, 평균 상대습도, 평균 해수온도, 평균 파주기가 높을수록 증가하는 경향을 보이고 있고, 최대 파고, 최대 파주기가 낮을수록 꽃게의 출하건수는 증가하는 경향을 보이고 있었다.

• Wind and Structures
• /
• 제36권3호
• /
• pp.161-174
• /
• 2023

The analytical model of tornado vortices plays an essential role in tornado wind description and tornado-resistant design of civil structures. However, there is still a lack of guidance for the selection and application of tornado analytical models since they are different from each other. For single-cell tornado vortices, this study conducts a comparative study on the velocity characteristics of the analytical models based on numerically simulated tornado-like vortices (TLV). The single-cell stage TLV is first generated by Large-eddy simulations (LES). The spatial distribution of the three-dimensional mean velocity of the typical analytical tornado models is then investigated by comparison to the TLV with different swirl ratios. Finally, key parameters are given as functions of swirl ratio for the direct application of analytical tornado models to generate full-scale tornado wind field. Results show that the height of the maximum radial mean velocity is more appropriate to be defined as the boundary layer thickness of the TLV than the height of the maximum tangential mean velocity. The TLV velocity within the boundary layer can be well estimated by the analytical model. Simple fitted results show that the full-scale maximum radial and tangential mean velocity increase linearly with the swirl ratio, while the radius and height corresponding to the position of these two velocities decrease non-linearly with the swirl ratio.

• Wind and Structures
• /
• 제1권4호
• /
• pp.287-302
• /
• 1998

This paper formulates a probabilistic model which is able to represent the maximum instantaneous wind velocity. Unlike the classical methods, where the randomness is circumscribed within the mean maximum component, this model relies also on the randomness of the maximum value of the turbulent fluctuation. The application of the FOSM method furnishes the first and second statistical moments in closed form. The comparison between the results herein obtained and those supplied by classical methods points out the central role of the turbulence intensity. Its importance is exalted when extending the analysis from the wind velocity to the wind pressure.